ARM: dts: mxs: use padconfig macros

Convert mx2{3,8} dts files to use the padconfig macros defined in
mxs-pinfunc.h.

Signed-off-by: Dario Binacchi <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>

Author: passgat

arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts

@@ -93,9 +93,9 @@
 						MX23_PAD_LCD_HSYNC__GPIO_1_24
 						MX23_PAD_PWM3__GPIO_1_29
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 		};

arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts

@@ -83,9 +83,9 @@
 					fsl,pinmux-ids = <
 						MX23_PAD_GPMI_D07__GPIO_0_7
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				key_pins_a: keys@0 {
@@ -94,9 +94,9 @@
 						MX23_PAD_ROTARYA__GPIO_2_7
 						MX23_PAD_ROTARYB__GPIO_2_8
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 			};
 		};

arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts

@@ -102,9 +102,9 @@
 			0x31c3 /*
 			MX28_PAD_PWM3__GPIO_3_28 */
 		>;
-		fsl,drive-strength = <0>;
-		fsl,voltage = <1>;
-		fsl,pull-up = <0>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 };