Merge tag 'qcom-arm64-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

Qualcomm Arm64 DeviceTree updates for v6.16

The Snapdragon X Plus platform and related reference device is
introduced. Devicetree for the Xiaomi Redmi Note 8 is added.

Tsens and thermal zones are added for IPQ5332 and IPQ5424. IPQ6018 gains
1.2GHz and 1.5GHz CPU frequencies. The IPQ5424 gains MMC, LEDs and
buttons, while the IPQ9574 gains NSS clock controller and SPI NAND
support.

IPQ6018 SMEM is transitioned to be described directly in the
reserved-memory node.

Display and GPU are enabled in the QCM6490-based Fairphone FP5. On
QCS6490 Rb3Gen2 ADC channels for thermal profiling are added and
Bluetooth is enabled. The USB Type-C orientation GPIO is added on the
QCS6490 Rb3Gen2 and the vision mezzanine is described.
The Fairphone FP5 gains touchscreen and USB Type-C display support, and
the QCM6490 IDP board gains a required listed of protected clocks.

The camera subsystem in SC7280 is described and UFS is transitioned to
use operating points.

On MSM8916, MSM8919 and MSM8939, and devices on these platforms, the
UART pinctrl state is cleaned up.

The MSM8953 platform gains another UART and interconnects.

On SA8775P CTCU and ETR nodes are added, and the CPUfreq throttling
interrupts are added.

Samsung Galaxy S9 SM-G9600 gains a description of the MAX77705 used for
charging, fuel gauge, haptic, and LED, as well as the PMIC used for
display and touchscreen, which then is used to enable the touchscreen.

The LPG/PWM node is added to PM8937 and Xiaomi Redmi 5A gains display
backlight control.

Display and GPU are enabled for the Nothing Phone (1).

QCS615 platform gains command DB definition.

The QCS8300 platform gains description of more QUP instances, CPUfreq,
PCIe SMMU and the SPMI controller.

On SAR2130P PCIe EP device nodes are added.

On SDM630 missing resets are added for SDCC. Then on Fairphone FP3 modem
is enabled, and firmware-path are defined on ADSP and WCNSS.

The SDM845 RB3/DragonBoard845c and the QRB5165 RB5 has the sensors DSP
enabled, and the vision mezzanine on both gets their CMA configuration
cleaned up. Xiaomi Pocophone F1 gains touchscreen support.

On the SM7325 Nothing Phone (1), display, GPU, and camera EEPROMs are
described.

On SM8450 the PCIe endpoint controller is described.

For SM8550 OPP tables are described for PCIe and QUP. SM8750 gains RPMh
sleep stats.

SM8650 gians OSM L3 scaling and variety of OPP tables and missing
interconnect definitions. The thermal trip points for CPU cores and GPU
are raised in reliance on hardware throttling.
SM8650 is also transitioned to per-CPU interrupt partitions, in order to
properly describe the PMU interrupts. Missing Coresight ETE instances
are added.

On SM8750 the cluster idle states are corrected, then audio and compute
DSPs are introduced, together with the crypto and rng blocks. Modem
support is added and enabled on MTP and QRD devices.

On SC8280XP overlays are introduced for those running Linux at EL2 on
these devices. A few more temp-alarm instances are added for the PMICs.

On the X Elite platform GPU cooling and watchdog is introduced, together
with a number of smaller fixes. Dell XPS13 gains support for USB Type-C
display, the QCP gains WiFi/BT power sequence, and a few devices learns
about HBR3. The RTC support is enabled and regulators that are feeding
resources that should be always on is marked as such on a variety of
boards.
The Lenovo Thinkpad T14s DeviceTree is split in two, in order to
describe the LCD and OLED variants.

Missing properties for the crypto BAM is introduced on a variety of
platforms, taking care of a long standing error message in the kernel
log during boot.

DSI phy clock ids are transitioned to use identifiers from the PHY
header file and VBIF region size is corrected, across a large number of
platforms.

A couple of DWC3 quirks are added across a lot of platforms.

The arm32-for-6.15 pull request was accidentally merged into the
arm64-for-6.16 branch and this wasn't discovered until a significant
number of commits would have to be rebased. As such this is kept here as
well.

* tag 'qcom-arm64-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (308 commits)
  arm64: dts: qcom: sdm845-xiaomi-beryllium-ebbg: introduce touchscreen support
  arm64: dts: qcom: sdm845-xiaomi-beryllium-tianma: introduce touchscreen support
  arm64: dts: qcom: sdm845-xiaomi-beryllium-common: add touchscreen related nodes
  arm64: dts: qcom: qcs8300: add the pcie smmu node
  arm64: dts: qcom: x1e80100-*: Drop useless DP3 compatible override
  arm64: dts: qcom: msm8953: Add interconnects
  arm64: dts: qcom: msm8953: Add uart_5
  arm64: dts: qcom: sm8350: Use q6asm defines for reg
  arm64: dts: qcom: sm7325-nothing-spacewar: Use q6asm defines for reg
  arm64: dts: qcom: sdm850*: Use q6asm defines for reg
  arm64: dts: qcom: sdm845*: Use q6asm defines for reg
  arm64: dts: qcom: sc7280: Use q6asm defines for reg
  arm64: dts: qcom: sc7180-acer-aspire1: Use q6asm defines for reg
  arm64: dts: qcom: qrb5165-rb5: Use q6asm defines for reg
  arm64: dts: qcom: msm8996*: Use q6asm defines for reg
  arm64: dts: qcom: msm8953: Use q6asm defines for reg
  arm64: dts: qcom: msm8916-modem-qdsp6: Use q6asm defines for reg
  arm64: dts: qcom: apq8096-db820c: Use q6asm defines for reg
  arm64: dts: qcom: qcm6490-fairphone-fp5: Hook up DisplayPort over USB-C
  arm64: dts: qcom: qcm6490-fairphone-fp5: Add OCP96011 audio switch
  ...

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>

Author: arndb

Documentation/devicetree/bindings/arm/qcom.yaml

@@ -90,6 +90,7 @@ description: |
         sm6350
         sm6375
         sm7125
+        sm7150
         sm7225
         sm7325
         sm8150
@@ -1020,6 +1021,7 @@ properties:
       - items:
           - enum:
               - sony,pdx201
+              - xiaomi,ginkgo
               - xiaomi,laurel-sprout
           - const: qcom,sm6125
 
@@ -1039,6 +1041,11 @@ properties:
               - xiaomi,joyeuse
           - const: qcom,sm7125
 
+      - items:
+          - enum:
+              - google,sunfish
+          - const: qcom,sm7150
+
       - items:
           - enum:
               - fairphone,fp4
@@ -1123,13 +1130,16 @@ properties:
 
       - items:
           - enum:
-              - lenovo,thinkpad-t14s
+              - lenovo,thinkpad-t14s-lcd
+              - lenovo,thinkpad-t14s-oled
+          - const: lenovo,thinkpad-t14s
           - const: qcom,x1e78100
           - const: qcom,x1e80100
 
       - items:
           - enum:
               - asus,vivobook-s15
+              - asus,zenbook-a14-ux3407ra
               - dell,xps13-9345
               - hp,omnibook-x14
               - lenovo,yoga-slim7x
@@ -1141,6 +1151,7 @@ properties:
 
       - items:
           - enum:
+              - asus,zenbook-a14-ux3407qa
               - qcom,x1p42100-crd
           - const: qcom,x1p42100
 

arch/arm/boot/dts/qcom/Makefile

@@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-apq8064-ifc6410.dtb \
 	qcom-apq8064-sony-xperia-lagan-yuga.dtb \
 	qcom-apq8064-asus-nexus7-flo.dtb \
+	qcom-apq8064-lg-nexus4-mako.dtb \
 	qcom-apq8074-dragonboard.dtb \
 	qcom-apq8084-ifc6540.dtb \
 	qcom-apq8084-mtp.dtb \

arch/arm/boot/dts/qcom/msm8926.dtsi

@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Luca Weiss <[email protected]>
+ */
+
+#include "qcom-msm8226.dtsi"
+
+&modem {
+	compatible = "qcom,msm8926-mss-pil";
+	/delete-property/ qcom,ext-bhs-reg;
+};

arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts

@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include "qcom-msm8226.dtsi"
 #include "qcom-msm8226-samsung-matisse-common.dtsi"
 
 / {

arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts

@@ -12,6 +12,8 @@
 #include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
+/delete-node/ &mba_region;
+/delete-node/ &mpss_region;
 /delete-node/ &smem_region;
 
 / {