Merge branch 'clk-bcm' into clk-next

 - Make defines for bcm63xx-gate clks to use in DT
 - Support gate clks on BCM6318 SoCs
 - Add HDMI clks for BCM2711 SoCs
 - Support BCM2711 SoC firmware clks

* clk-bcm: (42 commits)
  clk: bcm: dvp: Add missing module informations
  clk: bcm: rpi: Remove the quirks for the CPU clock
  clk: bcm2835: Don't cache the PLLB rate
  clk: bcm2835: Allow custom CCF flags for the PLLs
  Revert "clk: bcm2835: remove pllb"
  clk: bcm: rpi: Give firmware clocks a name
  clk: bcm: rpi: Discover the firmware clocks
  clk: bcm: rpi: Add an enum for the firmware clocks
  clk: bcm: rpi: Add DT provider for the clocks
  clk: bcm: rpi: Make the PLLB registration function return a clk_hw
  clk: bcm: rpi: Split pllb clock hooks
  clk: bcm: rpi: Rename is_prepared function
  clk: bcm: rpi: Pass the clocks data to the firmware function
  clk: bcm: rpi: Add clock id to data
  clk: bcm: rpi: Create a data structure for the clocks
  clk: bcm: rpi: Use CCF boundaries instead of rolling our own
  clk: bcm: rpi: Make sure the clkdev lookup is removed
  clk: bcm: rpi: Switch to clk_hw_register_clkdev
  clk: bcm: rpi: Remove pllb_arm_lookup global pointer
  clk: bcm: rpi: Make sure pllb_arm is removed
  ...

Author: bebarino

Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt

@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/raspberrypi,bcm2835-firmware.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raspberry Pi VideoCore firmware driver
+
+maintainers:
+  - Eric Anholt <[email protected]>
+  - Stefan Wahren <[email protected]>
+
+properties:
+  compatible:
+    items:
+      - const: raspberrypi,bcm2835-firmware
+      - const: simple-bus
+
+  mboxes:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: |
+      Phandle to the firmware device's Mailbox.
+      (See: ../mailbox/mailbox.txt for more information)
+
+  clocks:
+    type: object
+
+    properties:
+      compatible:
+        const: raspberrypi,firmware-clocks
+
+      "#clock-cells":
+        const: 1
+        description: >
+          The argument is the ID of the clocks contained by the
+          firmware messages.
+
+    required:
+      - compatible
+      - "#clock-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - mboxes
+
+examples:
+  - |
+    firmware {
+        compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
+        mboxes = <&mailbox>;
+
+        firmware_clocks: clocks {
+            compatible = "raspberrypi,firmware-clocks";
+            #clock-cells = <1>;
+        };
+    };
+...

Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml

@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,bcm2711-dvp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2711 HDMI DVP Device Tree Bindings
+
+maintainers:
+  - Maxime Ripard <[email protected]>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    const: brcm,brcm2711-dvp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    dvp: clock@7ef00000 {
+        compatible = "brcm,brcm2711-dvp";
+        reg = <0x7ef00000 0x10>;
+        clocks = <&clk_108MHz>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+...

Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml

@@ -3,6 +3,8 @@ Gated Clock Controller Bindings for MIPS based BCM63XX SoCs
 Required properties:
 - compatible: must be one of:
 	 "brcm,bcm3368-clocks"
+	 "brcm,bcm6318-clocks"
+	 "brcm,bcm6318-ubus-clocks"
 	 "brcm,bcm6328-clocks"
 	 "brcm,bcm6358-clocks"
 	 "brcm,bcm6362-clocks"

Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt

@@ -1,4 +1,15 @@
 # SPDX-License-Identifier: GPL-2.0-only
+
+config CLK_BCM2711_DVP
+	tristate "Broadcom BCM2711 DVP support"
+	depends on ARCH_BCM2835 ||COMPILE_TEST
+	depends on COMMON_CLK
+	default ARCH_BCM2835
+	select RESET_SIMPLE
+	help
+	  Enable common clock framework support for the Broadcom BCM2711
+	  DVP Controller.
+
 config CLK_BCM2835
 	bool "Broadcom BCM2835 clock support"
 	depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST

drivers/clk/bcm/Kconfig

@@ -6,6 +6,7 @@ obj-$(CONFIG_CLK_BCM_KONA)	+= clk-kona-setup.o
 obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm281xx.o
 obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm21664.o
 obj-$(CONFIG_COMMON_CLK_IPROC)	+= clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
+obj-$(CONFIG_CLK_BCM2711_DVP)	+= clk-bcm2711-dvp.o
 obj-$(CONFIG_CLK_BCM2835)	+= clk-bcm2835.o
 obj-$(CONFIG_CLK_BCM2835)	+= clk-bcm2835-aux.o
 obj-$(CONFIG_CLK_RASPBERRYPI)	+= clk-raspberrypi.o

drivers/clk/bcm/Makefile

@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2020 Cerno
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/reset/reset-simple.h>
+
+#define DVP_HT_RPI_SW_INIT	0x04
+#define DVP_HT_RPI_MISC_CONFIG	0x08
+
+#define NR_CLOCKS	2
+#define NR_RESETS	6
+
+struct clk_dvp {
+	struct clk_hw_onecell_data	*data;
+	struct reset_simple_data	reset;
+};
+
+static const struct clk_parent_data clk_dvp_parent = {
+	.index	= 0,
+};
+
+static int clk_dvp_probe(struct platform_device *pdev)
+{
+	struct clk_hw_onecell_data *data;
+	struct resource *res;
+	struct clk_dvp *dvp;
+	void __iomem *base;
+	int ret;
+
+	dvp = devm_kzalloc(&pdev->dev, sizeof(*dvp), GFP_KERNEL);
+	if (!dvp)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, dvp);
+
+	dvp->data = devm_kzalloc(&pdev->dev,
+				 struct_size(dvp->data, hws, NR_CLOCKS),
+				 GFP_KERNEL);
+	if (!dvp->data)
+		return -ENOMEM;
+	data = dvp->data;
+
+	base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	dvp->reset.rcdev.owner = THIS_MODULE;
+	dvp->reset.rcdev.nr_resets = NR_RESETS;
+	dvp->reset.rcdev.ops = &reset_simple_ops;
+	dvp->reset.rcdev.of_node = pdev->dev.of_node;
+	dvp->reset.membase = base + DVP_HT_RPI_SW_INIT;
+	spin_lock_init(&dvp->reset.lock);
+
+	ret = devm_reset_controller_register(&pdev->dev, &dvp->reset.rcdev);
+	if (ret)
+		return ret;
+
+	data->hws[0] = clk_hw_register_gate_parent_data(&pdev->dev,
+							"hdmi0-108MHz",
+							&clk_dvp_parent, 0,
+							base + DVP_HT_RPI_MISC_CONFIG, 3,
+							CLK_GATE_SET_TO_DISABLE,
+							&dvp->reset.lock);
+	if (IS_ERR(data->hws[0]))
+		return PTR_ERR(data->hws[0]);
+
+	data->hws[1] = clk_hw_register_gate_parent_data(&pdev->dev,
+							"hdmi1-108MHz",
+							&clk_dvp_parent, 0,
+							base + DVP_HT_RPI_MISC_CONFIG, 4,
+							CLK_GATE_SET_TO_DISABLE,
+							&dvp->reset.lock);
+	if (IS_ERR(data->hws[1])) {
+		ret = PTR_ERR(data->hws[1]);
+		goto unregister_clk0;
+	}
+
+	data->num = NR_CLOCKS;
+	ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,
+				     data);
+	if (ret)
+		goto unregister_clk1;
+
+	return 0;
+
+unregister_clk1:
+	clk_hw_unregister_gate(data->hws[1]);
+
+unregister_clk0:
+	clk_hw_unregister_gate(data->hws[0]);
+	return ret;
+};
+
+static int clk_dvp_remove(struct platform_device *pdev)
+{
+	struct clk_dvp *dvp = platform_get_drvdata(pdev);
+	struct clk_hw_onecell_data *data = dvp->data;
+
+	clk_hw_unregister_gate(data->hws[1]);
+	clk_hw_unregister_gate(data->hws[0]);
+
+	return 0;
+}
+
+static const struct of_device_id clk_dvp_dt_ids[] = {
+	{ .compatible = "brcm,brcm2711-dvp", },
+	{ /* sentinel */ }
+};
+
+static struct platform_driver clk_dvp_driver = {
+	.probe	= clk_dvp_probe,
+	.remove	= clk_dvp_remove,
+	.driver	= {
+		.name		= "brcm2711-dvp",
+		.of_match_table	= clk_dvp_dt_ids,
+	},
+};
+module_platform_driver(clk_dvp_driver);
+
+MODULE_AUTHOR("Maxime Ripard <[email protected]>");
+MODULE_DESCRIPTION("BCM2711 DVP clock driver");
+MODULE_LICENSE("GPL");

drivers/clk/bcm/clk-bcm2711-dvp.c

@@ -421,6 +421,7 @@ struct bcm2835_pll_data {
 	u32 reference_enable_mask;
 	/* Bit in CM_LOCK to indicate when the PLL has locked. */
 	u32 lock_mask;
+	u32 flags;
 
 	const struct bcm2835_pll_ana_bits *ana;
 
@@ -1310,7 +1311,7 @@ static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman,
 	init.num_parents = 1;
 	init.name = pll_data->name;
 	init.ops = &bcm2835_pll_clk_ops;
-	init.flags = CLK_IGNORE_UNUSED;
+	init.flags = pll_data->flags | CLK_IGNORE_UNUSED;
 
 	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
 	if (!pll)
@@ -1684,10 +1685,33 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
 		.fixed_divider = 1,
 		.flags = CLK_SET_RATE_PARENT),
 
-	/*
-	 * PLLB is used for the ARM's clock. Controlled by firmware, see
-	 * clk-raspberrypi.c.
-	 */
+	/* PLLB is used for the ARM's clock. */
+	[BCM2835_PLLB]		= REGISTER_PLL(
+		SOC_ALL,
+		.name = "pllb",
+		.cm_ctrl_reg = CM_PLLB,
+		.a2w_ctrl_reg = A2W_PLLB_CTRL,
+		.frac_reg = A2W_PLLB_FRAC,
+		.ana_reg_base = A2W_PLLB_ANA0,
+		.reference_enable_mask = A2W_XOSC_CTRL_PLLB_ENABLE,
+		.lock_mask = CM_LOCK_FLOCKB,
+
+		.ana = &bcm2835_ana_default,
+
+		.min_rate = 600000000u,
+		.max_rate = 3000000000u,
+		.max_fb_rate = BCM2835_MAX_FB_RATE,
+		.flags = CLK_GET_RATE_NOCACHE),
+	[BCM2835_PLLB_ARM]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "pllb_arm",
+		.source_pll = "pllb",
+		.cm_reg = CM_PLLB,
+		.a2w_reg = A2W_PLLB_ARM,
+		.load_mask = CM_PLLB_LOADARM,
+		.hold_mask = CM_PLLB_HOLDARM,
+		.fixed_divider = 1,
+		.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE),
 
 	/*
 	 * PLLC is the core PLL, used to drive the core VPU clock.