arm64: dts: qcom: sm6115p-j606f: Enable ATH10K WiFi

Enable the onboard QCA Wi-Fi. HW identifiers for reference:
qmi chip_id 0x320 chip_family 0x4001 board_id 0xff soc_id 0x400e0000

Firmware sources:
/vendor/firmware_mnt/image/wlanmdsp.bin -> qcom/.../wlanmdsp.mbn
/vendor/firmware_mnt/image/bdwlan.bXX [1] -> [2] -> ath10k/.../board-2.bin
[3] -> ath10k/.../firmware-5.bin

Not sure where 3 comes from on the device itself, gotta investigate that..

According to [4], it's called WCN3990_STRAIT.

[1] XX = board_id printed when the file is missing or by your downstream
kernel firmware loader in the dmesg; if XX=ff, use bdwlan.bin

[2] https://github.com/jhugo/linux/blob/5.5rc2_wifi/README
[3] https://github.com/kvalo/ath10k-firmware/blob/master/WCN3990/hw1.0/HL3.1/WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1/firmware-5.bin
[4] https://git.codelinaro.org/clo/la/platform/vendor/qcom-opensource/wlan/qca-wifi-host-cmn/-/blob/LA.VENDOR.1.0.r1-20700-WAIPIO.QSSI13.0/hif/src/hif_hw_version.h#L55

Signed-off-by: Konrad Dybcio <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

Author: konradybcio

arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts

@@ -315,6 +315,15 @@
 	status = "okay";
 };
 
+&wifi {
+	vdd-0.8-cx-mx-supply = <&pm6125_l8>;
+	vdd-1.8-xo-supply = <&pm6125_l16>;
+	vdd-1.3-rfa-supply = <&pm6125_l17>;
+	vdd-3.3-ch0-supply = <&pm6125_l23>;
+	qcom,ath10k-calibration-variant = "Lenovo_P11";
+	status = "okay";
+};
+
 &xo_board {
 	clock-frequency = <19200000>;
 };