firmware: qcom: scm: Add gpu_init_regs call

This will used by drm/msm to initialize GPU registers that Qualcomm's
firmware doesn't make writeable to the kernel.

Reviewed-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Connor Abbott <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Acked-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>

Author: cwabbott0

drivers/firmware/qcom/qcom_scm.c

@@ -1394,6 +1394,20 @@ int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val,
 }
 EXPORT_SYMBOL_GPL(qcom_scm_lmh_dcvsh);
 
+int qcom_scm_gpu_init_regs(u32 gpu_req)
+{
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_GPU,
+		.cmd = QCOM_SCM_SVC_GPU_INIT_REGS,
+		.arginfo = QCOM_SCM_ARGS(1),
+		.args[0] = gpu_req,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+
+	return qcom_scm_call(__scm->dev, &desc, NULL);
+}
+EXPORT_SYMBOL_GPL(qcom_scm_gpu_init_regs);
+
 static int qcom_scm_find_dload_address(struct device *dev, u64 *addr)
 {
 	struct device_node *tcsr;

drivers/firmware/qcom/qcom_scm.h

@@ -138,6 +138,9 @@ int scm_legacy_call(struct device *dev, const struct qcom_scm_desc *desc,
 #define QCOM_SCM_WAITQ_RESUME			0x02
 #define QCOM_SCM_WAITQ_GET_WQ_CTX		0x03
 
+#define QCOM_SCM_SVC_GPU			0x28
+#define QCOM_SCM_SVC_GPU_INIT_REGS		0x01
+
 /* common error codes */
 #define QCOM_SCM_V2_EBUSY	-12
 #define QCOM_SCM_ENOMEM		-5

include/linux/firmware/qcom/qcom_scm.h

@@ -115,6 +115,29 @@ int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val,
 int qcom_scm_lmh_profile_change(u32 profile_id);
 bool qcom_scm_lmh_dcvsh_available(void);
 
+/*
+ * Request TZ to program set of access controlled registers necessary
+ * irrespective of any features
+ */
+#define QCOM_SCM_GPU_ALWAYS_EN_REQ BIT(0)
+/*
+ * Request TZ to program BCL id to access controlled register when BCL is
+ * enabled
+ */
+#define QCOM_SCM_GPU_BCL_EN_REQ BIT(1)
+/*
+ * Request TZ to program set of access controlled register for CLX feature
+ * when enabled
+ */
+#define QCOM_SCM_GPU_CLX_EN_REQ BIT(2)
+/*
+ * Request TZ to program tsense ids to access controlled registers for reading
+ * gpu temperature sensors
+ */
+#define QCOM_SCM_GPU_TSENSE_EN_REQ BIT(3)
+
+int qcom_scm_gpu_init_regs(u32 gpu_req);
+
 #ifdef CONFIG_QCOM_QSEECOM
 
 int qcom_scm_qseecom_app_get_id(const char *app_name, u32 *app_id);