drm/amdgpu/gfx10: re-init clear state buffer after gpu reset

This patch fixes 2nd baco reset failure with gfxoff enabled on navi1x.

clear state buffer (resides in vram) is corrupted after 1st baco reset,
upon gfxoff exit, CPF gets garbage header in CSIB and hangs.

Signed-off-by: Xiaojie Yuan <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]

Author: Xiaojie Yuan

drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c

@@ -1785,27 +1785,52 @@ static void gfx_v10_0_enable_gui_idle_interrupt(struct amdgpu_device *adev,
 	WREG32_SOC15(GC, 0, mmCP_INT_CNTL_RING0, tmp);
 }
 
-static void gfx_v10_0_init_csb(struct amdgpu_device *adev)
+static int gfx_v10_0_init_csb(struct amdgpu_device *adev)
 {
+	int r;
+
+	if (adev->in_gpu_reset) {
+		r = amdgpu_bo_reserve(adev->gfx.rlc.clear_state_obj, false);
+		if (r)
+			return r;
+
+		r = amdgpu_bo_kmap(adev->gfx.rlc.clear_state_obj,
+				   (void **)&adev->gfx.rlc.cs_ptr);
+		if (!r) {
+			adev->gfx.rlc.funcs->get_csb_buffer(adev,
+					adev->gfx.rlc.cs_ptr);
+			amdgpu_bo_kunmap(adev->gfx.rlc.clear_state_obj);
+		}
+
+		amdgpu_bo_unreserve(adev->gfx.rlc.clear_state_obj);
+		if (r)
+			return r;
+	}
+
 	/* csib */
 	WREG32_SOC15(GC, 0, mmRLC_CSIB_ADDR_HI,
 		     adev->gfx.rlc.clear_state_gpu_addr >> 32);
 	WREG32_SOC15(GC, 0, mmRLC_CSIB_ADDR_LO,
 		     adev->gfx.rlc.clear_state_gpu_addr & 0xfffffffc);
 	WREG32_SOC15(GC, 0, mmRLC_CSIB_LENGTH, adev->gfx.rlc.clear_state_size);
+
+	return 0;
 }
 
-static void gfx_v10_0_init_pg(struct amdgpu_device *adev)
+static int gfx_v10_0_init_pg(struct amdgpu_device *adev)
 {
 	int i;
+	int r;
 
-	gfx_v10_0_init_csb(adev);
+	r = gfx_v10_0_init_csb(adev);
+	if (r)
+		return r;
 
 	for (i = 0; i < adev->num_vmhubs; i++)
 		amdgpu_gmc_flush_gpu_tlb(adev, 0, i, 0);
 
 	/* TODO: init power gating */
-	return;
+	return 0;
 }
 
 void gfx_v10_0_rlc_stop(struct amdgpu_device *adev)
@@ -1907,7 +1932,10 @@ static int gfx_v10_0_rlc_resume(struct amdgpu_device *adev)
 		r = gfx_v10_0_wait_for_rlc_autoload_complete(adev);
 		if (r)
 			return r;
-		gfx_v10_0_init_pg(adev);
+
+		r = gfx_v10_0_init_pg(adev);
+		if (r)
+			return r;
 
 		/* enable RLC SRM */
 		gfx_v10_0_rlc_enable_srm(adev);
@@ -1933,7 +1961,10 @@ static int gfx_v10_0_rlc_resume(struct amdgpu_device *adev)
 				return r;
 		}
 
-		gfx_v10_0_init_pg(adev);
+		r = gfx_v10_0_init_pg(adev);
+		if (r)
+			return r;
+
 		adev->gfx.rlc.funcs->start(adev);
 
 		if (adev->firmware.load_type == AMDGPU_FW_LOAD_RLC_BACKDOOR_AUTO) {