Rust-for-Linux
diff --git a/‎Documentation/admin-guide/kernel-parameters.txt
Lines changed: 3 additions & 0 deletions b/‎Documentation/admin-guide/kernel-parameters.txt
Lines changed: 3 additions & 0 deletions
diff --git a/‎Documentation/admin-guide/perf/hisi-pmu.rst
Lines changed: 26 additions & 14 deletions b/‎Documentation/admin-guide/perf/hisi-pmu.rst
Lines changed: 26 additions & 14 deletions
diff --git a/‎Documentation/arm64/acpi_object_usage.rst
Lines changed: 76 additions & 5 deletions b/‎Documentation/arm64/acpi_object_usage.rst
Lines changed: 76 additions & 5 deletions
@@ -429,6 +429,9 @@
 	arm64.nosme	[ARM64] Unconditionally disable Scalable Matrix
 			Extension support
 
+	arm64.nomops	[ARM64] Unconditionally disable Memory Copy and Memory
+			Set instructions support
+
 	ataflop=	[HW,M68k]
 
 	atarimouse=	[HW,MOUSE] Atari Mouse
 
@@ -56,14 +56,14 @@ Example usage of perf::
 For HiSilicon uncore PMU v2 whose identifier is 0x30, the topology is the same
 as PMU v1, but some new functions are added to the hardware.
 
-(a) L3C PMU supports filtering by core/thread within the cluster which can be
+1. L3C PMU supports filtering by core/thread within the cluster which can be
 specified as a bitmap::
 
   $# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_core=0x3/ sleep 5
 
 This will only count the operations from core/thread 0 and 1 in this cluster.
 
-(b) Tracetag allow the user to chose to count only read, write or atomic
+2. Tracetag allow the user to chose to count only read, write or atomic
 operations via the tt_req parameeter in perf. The default value counts all
 operations. tt_req is 3bits, 3'b100 represents read operations, 3'b101
 represents write operations, 3'b110 represents atomic store operations and
@@ -73,30 +73,42 @@ represents write operations, 3'b110 represents atomic store operations and
 
 This will only count the read operations in this cluster.
 
-(c) Datasrc allows the user to check where the data comes from. It is 5 bits.
+3. Datasrc allows the user to check where the data comes from. It is 5 bits.
 Some important codes are as follows:
-5'b00001: comes from L3C in this die;
-5'b01000: comes from L3C in the cross-die;
-5'b01001: comes from L3C which is in another socket;
-5'b01110: comes from the local DDR;
-5'b01111: comes from the cross-die DDR;
-5'b10000: comes from cross-socket DDR;
+
+- 5'b00001: comes from L3C in this die;
+- 5'b01000: comes from L3C in the cross-die;
+- 5'b01001: comes from L3C which is in another socket;
+- 5'b01110: comes from the local DDR;
+- 5'b01111: comes from the cross-die DDR;
+- 5'b10000: comes from cross-socket DDR;
+
 etc, it is mainly helpful to find that the data source is nearest from the CPU
 cores. If datasrc_cfg is used in the multi-chips, the datasrc_skt shall be
 configured in perf command::
 
   $# perf stat -a -e hisi_sccl3_l3c0/config=0xb9,datasrc_cfg=0xE/,
   hisi_sccl3_l3c0/config=0xb9,datasrc_cfg=0xF/ sleep 5
 
-(d)Some HiSilicon SoCs encapsulate multiple CPU and IO dies. Each CPU die
+4. Some HiSilicon SoCs encapsulate multiple CPU and IO dies. Each CPU die
 contains several Compute Clusters (CCLs). The I/O dies are called Super I/O
 clusters (SICL) containing multiple I/O clusters (ICLs). Each CCL/ICL in the
 SoC has a unique ID. Each ID is 11bits, include a 6-bit SCCL-ID and 5-bit
 CCL/ICL-ID. For I/O die, the ICL-ID is followed by:
-5'b00000: I/O_MGMT_ICL;
-5'b00001: Network_ICL;
-5'b00011: HAC_ICL;
-5'b10000: PCIe_ICL;
+
+- 5'b00000: I/O_MGMT_ICL;
+- 5'b00001: Network_ICL;
+- 5'b00011: HAC_ICL;
+- 5'b10000: PCIe_ICL;
+
+5. uring_channel: UC PMU events 0x47~0x59 supports filtering by tx request
+uring channel. It is 2 bits. Some important codes are as follows:
+
+- 2'b11: count the events which sent to the uring_ext (MATA) channel;
+- 2'b01: is the same as 2'b11;
+- 2'b10: count the events which sent to the uring (non-MATA) channel;
+- 2'b00: default value, count the events which sent to the both uring and
+  uring_ext channel;
 
 Users could configure IDs to count data come from specific CCL/ICL, by setting
 srcid_cmd & srcid_msk, and data desitined for specific CCL/ICL by setting
 
@@ -17,16 +17,37 @@ For ACPI on arm64, tables also fall into the following categories:
 
        -  Recommended: BERT, EINJ, ERST, HEST, PCCT, SSDT
 
-       -  Optional: BGRT, CPEP, CSRT, DBG2, DRTM, ECDT, FACS, FPDT, IBFT,
-          IORT, MCHI, MPST, MSCT, NFIT, PMTT, RASF, SBST, SLIT, SPMI, SRAT,
-          STAO, TCPA, TPM2, UEFI, XENV
+       -  Optional: AGDI, BGRT, CEDT, CPEP, CSRT, DBG2, DRTM, ECDT, FACS, FPDT,
+          HMAT, IBFT, IORT, MCHI, MPAM, MPST, MSCT, NFIT, PMTT, PPTT, RASF, SBST,
+          SDEI, SLIT, SPMI, SRAT, STAO, TCPA, TPM2, UEFI, XENV
 
-       -  Not supported: BOOT, DBGP, DMAR, ETDT, HPET, IVRS, LPIT, MSDM, OEMx,
-          PSDT, RSDT, SLIC, WAET, WDAT, WDRT, WPBT
+       -  Not supported: AEST, APMT, BOOT, DBGP, DMAR, ETDT, HPET, IVRS, LPIT,
+          MSDM, OEMx, PDTT, PSDT, RAS2, RSDT, SLIC, WAET, WDAT, WDRT, WPBT
 
 ====== ========================================================================
 Table  Usage for ARMv8 Linux
 ====== ========================================================================
+AEST   Signature Reserved (signature == "AEST")
+
+       **Arm Error Source Table**
+
+       This table informs the OS of any error nodes in the system that are
+       compliant with the Arm RAS architecture.
+
+AGDI   Signature Reserved (signature == "AGDI")
+
+       **Arm Generic diagnostic Dump and Reset Device Interface Table**
+
+       This table describes a non-maskable event, that is used by the platform
+       firmware, to request the OS to generate a diagnostic dump and reset the device.
+
+APMT   Signature Reserved (signature == "APMT")
+
+       **Arm Performance Monitoring Table**
+
+       This table describes the properties of PMU support implmented by
+       components in the system.
+
 BERT   Section 18.3 (signature == "BERT")
 
        **Boot Error Record Table**
@@ -47,6 +68,13 @@ BGRT   Section 5.2.22 (signature == "BGRT")
        Optional, not currently supported, with no real use-case for an
        ARM server.
 
+CEDT   Signature Reserved (signature == "CEDT")
+
+       **CXL Early Discovery Table**
+
+       This table allows the OS to discover any CXL Host Bridges and the Host
+       Bridge registers.
+
 CPEP   Section 5.2.18 (signature == "CPEP")
 
        **Corrected Platform Error Polling table**
@@ -184,6 +212,15 @@ HEST   Section 18.3.2 (signature == "HEST")
        Must be supplied if RAS support is provided by the platform.  It
        is recommended this table be supplied.
 
+HMAT   Section 5.2.28 (signature == "HMAT")
+
+       **Heterogeneous Memory Attribute Table**
+
+       This table describes the memory attributes, such as memory side cache
+       attributes and bandwidth and latency details, related to Memory Proximity
+       Domains. The OS uses this information to optimize the system memory
+       configuration.
+
 HPET   Signature Reserved (signature == "HPET")
 
        **High Precision Event timer Table**
@@ -241,6 +278,13 @@ MCHI   Signature Reserved (signature == "MCHI")
 
        Optional, not currently supported.
 
+MPAM   Signature Reserved (signature == "MPAM")
+
+       **Memory Partitioning And Monitoring table**
+
+       This table allows the OS to discover the MPAM controls implemented by
+       the subsystems.
+
 MPST   Section 5.2.21 (signature == "MPST")
 
        **Memory Power State Table**
@@ -281,18 +325,39 @@ PCCT   Section 14.1 (signature == "PCCT)
        Recommend for use on arm64; use of PCC is recommended when using CPPC
        to control performance and power for platform processors.
 
+PDTT   Section 5.2.29 (signature == "PDTT")
+
+       **Platform Debug Trigger Table**
+
+       This table describes PCC channels used to gather debug logs of
+       non-architectural features.
+
+
 PMTT   Section 5.2.21.12 (signature == "PMTT")
 
        **Platform Memory Topology Table**
 
        Optional, not currently supported.
 
+PPTT   Section 5.2.30 (signature == "PPTT")
+
+       **Processor Properties Topology Table**
+
+       This table provides the processor and cache topology.
+
 PSDT   Section 5.2.11.3 (signature == "PSDT")
 
        **Persistent System Description Table**
 
        Obsolete table, will not be supported.
 
+RAS2   Section 5.2.21 (signature == "RAS2")
+
+       **RAS Features 2 table**
+
+       This table provides interfaces for the RAS capabilities implemented in
+       the platform.
+
 RASF   Section 5.2.20 (signature == "RASF")
 
        **RAS Feature table**
@@ -318,6 +383,12 @@ SBST   Section 5.2.14 (signature == "SBST")
 
        Optional, not currently supported.
 
+SDEI   Signature Reserved (signature == "SDEI")
+
+       **Software Delegated Exception Interface table**
+
+       This table advertises the presence of the SDEI interface.
+
 SLIC   Signature Reserved (signature == "SLIC")
 
        **Software LIcensing table**