Revert "ARM: dts: stm32: add CAN support on stm32f746"

This reverts commit 0920ccd.

The commit 0920ccd ("ARM: dts: stm32: add CAN support on
stm32f746") depends on the patch "dt-bindings: mfd: stm32f7: add
binding definition for CAN3" [1], which is not in net/main, yet. This
results in a parsing error of "stm32f746.dtsi".

So revert this commit.

[1] https://lore.kernel.org/all/[email protected]

Cc: Dario Binacchi <[email protected]>
Cc: Alexandre TORGUE <[email protected]>
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]
Fixes: 0920ccd ("ARM: dts: stm32: add CAN support on stm32f746")
Suggested-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Marc Kleine-Budde <[email protected]>

Author: marckleinebudde

arch/arm/boot/dts/stm32f746.dtsi

@@ -257,23 +257,6 @@
 			status = "disabled";
 		};
 
-		can3: can@40003400 {
-			compatible = "st,stm32f4-bxcan";
-			reg = <0x40003400 0x200>;
-			interrupts = <104>, <105>, <106>, <107>;
-			interrupt-names = "tx", "rx0", "rx1", "sce";
-			resets = <&rcc STM32F7_APB1_RESET(CAN3)>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
-			st,gcan = <&gcan3>;
-			status = "disabled";
-		};
-
-		gcan3: gcan@40003600 {
-			compatible = "st,stm32f4-gcan", "syscon";
-			reg = <0x40003600 0x200>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
-		};
-
 		usart2: serial@40004400 {
 			compatible = "st,stm32f7-uart";
 			reg = <0x40004400 0x400>;
@@ -354,36 +337,6 @@
 			status = "disabled";
 		};
 
-		can1: can@40006400 {
-			compatible = "st,stm32f4-bxcan";
-			reg = <0x40006400 0x200>;
-			interrupts = <19>, <20>, <21>, <22>;
-			interrupt-names = "tx", "rx0", "rx1", "sce";
-			resets = <&rcc STM32F7_APB1_RESET(CAN1)>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN1)>;
-			st,can-primary;
-			st,gcan = <&gcan1>;
-			status = "disabled";
-		};
-
-		gcan1: gcan@40006600 {
-			compatible = "st,stm32f4-gcan", "syscon";
-			reg = <0x40006600 0x200>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN1)>;
-		};
-
-		can2: can@40006800 {
-			compatible = "st,stm32f4-bxcan";
-			reg = <0x40006800 0x200>;
-			interrupts = <63>, <64>, <65>, <66>;
-			interrupt-names = "tx", "rx0", "rx1", "sce";
-			resets = <&rcc STM32F7_APB1_RESET(CAN2)>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN2)>;
-			st,can-secondary;
-			st,gcan = <&gcan1>;
-			status = "disabled";
-		};
-
 		cec: cec@40006c00 {
 			compatible = "st,stm32-cec";
 			reg = <0x40006C00 0x400>;