Merge tag 'i2c-host-fixes-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

i2c-host-fixes for v6.17-rc3

- hisi: update maintainership
- rtl9300: fix several issues in xfer
  - check message length boundaries
  - correct multi-byte value composition on write
  - increase polling timeout
  - fix block transfer protocol

Author: Wolfram Sang

MAINTAINERS

@@ -11013,7 +11013,7 @@ F:	Documentation/admin-guide/perf/hns3-pmu.rst
 F:	drivers/perf/hisilicon/hns3_pmu.c
 
 HISILICON I2C CONTROLLER DRIVER
-M:	Yicong Yang <yangyicong@hisilicon.com>
+M:	Devyn Liu <liudingyuan@h-partners.com>
 L:	[email protected]
 S:	Maintained
 W:	https://www.hisilicon.com

drivers/i2c/busses/i2c-rtl9300.c

@@ -143,10 +143,10 @@ static int rtl9300_i2c_write(struct rtl9300_i2c *i2c, u8 *buf, int len)
 		return -EIO;
 
 	for (i = 0; i < len; i++) {
-		if (i % 4 == 0)
-			vals[i/4] = 0;
-		vals[i/4] <<= 8;
-		vals[i/4] |= buf[i];
+		unsigned int shift = (i % 4) * 8;
+		unsigned int reg = i / 4;
+
+		vals[reg] |= buf[i] << shift;
 	}
 
 	return regmap_bulk_write(i2c->regmap, i2c->reg_base + RTL9300_I2C_MST_DATA_WORD0,
@@ -175,7 +175,7 @@ static int rtl9300_i2c_execute_xfer(struct rtl9300_i2c *i2c, char read_write,
 		return ret;
 
 	ret = regmap_read_poll_timeout(i2c->regmap, i2c->reg_base + RTL9300_I2C_MST_CTRL1,
-				       val, !(val & RTL9300_I2C_MST_CTRL1_I2C_TRIG), 100, 2000);
+				       val, !(val & RTL9300_I2C_MST_CTRL1_I2C_TRIG), 100, 100000);
 	if (ret)
 		return ret;
 
@@ -281,15 +281,19 @@ static int rtl9300_i2c_smbus_xfer(struct i2c_adapter *adap, u16 addr, unsigned s
 		ret = rtl9300_i2c_reg_addr_set(i2c, command, 1);
 		if (ret)
 			goto out_unlock;
-		ret = rtl9300_i2c_config_xfer(i2c, chan, addr, data->block[0]);
+		if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX) {
+			ret = -EINVAL;
+			goto out_unlock;
+		}
+		ret = rtl9300_i2c_config_xfer(i2c, chan, addr, data->block[0] + 1);
 		if (ret)
 			goto out_unlock;
 		if (read_write == I2C_SMBUS_WRITE) {
-			ret = rtl9300_i2c_write(i2c, &data->block[1], data->block[0]);
+			ret = rtl9300_i2c_write(i2c, &data->block[0], data->block[0] + 1);
 			if (ret)
 				goto out_unlock;
 		}
-		len = data->block[0];
+		len = data->block[0] + 1;
 		break;
 
 	default: