Merge tag 'qcom-drivers-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers

Qualcomm driver updates for v5.19

This converts a wide range of Qualcomm-related DeviceTree bindings to
YAML, in order to improve our ability to validate the DeviceTree source.

The RPMh power-domain driver gains support for the modem platform SDX65,
the compute platform SC8280XP and the automotive platform SA8540p. While
LLCC gains support for SC8180X and SC8280XP and gains a
MODULE_DEVICE_TABLE() to make it functional as a module.

It adds a driver for configuring the SSC bus, providing Linux access to
the hardware blocks in the sensor subsystem.

The socinfo driver gets confusion related to MSM8974 Pro sorted out and
adds new ids for SM8540 and SC7280.

The SCM driver gains support for MSM8974.

Add missing of_node_put() in smp2p and smsm drivers.
Stop using iterator after list_for_each_entry() and define static
definitions as such, in the PDR driver.

* tag 'qcom-drivers-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
  soc: qcom: pdr: use static for servreg_* variables
  soc: qcom: llcc: Add sc8180x and sc8280xp configurations
  dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
  soc: qcom: rpmhpd: add sc8280xp & sa8540p rpmh power-domains
  soc: qcom: rpmhpd: Don't warn about sparse rpmhpd arrays
  dt-bindings: power: rpmpd: Add sc8280xp RPMh power-domains
  spi: dt-bindings: qcom,spi-geni-qcom: convert to dtschema
  soc: qcom: socinfo: Sort out 8974PRO names
  dt-bindings: soc: qcom,smp2p: convert to dtschema
  dt-bindings: qcom: geni-se: Update UART schema reference
  dt-bindings: qcom: geni-se: Update I2C schema reference
  dt-bindings: soc: qcom,rpmh-rsc: convert to dtschema
  bus: add driver for initializing the SSC bus on (some) qcom SoCs
  dt-bindings: bus: add device tree bindings for qcom,ssc-block-bus
  dt-bindings: qcom: qcom,geni-se: refer to dtschema for SPI
  dt-bindings: soc: qcom,smd: convert to dtschema
  firmware: qcom_scm: Add compatible for MSM8976 SoC
  dt-bindings: firmware: qcom-scm: Document msm8976 bindings
  soc: qcom: smem: validate fields of shared structures
  soc: qcom: smem: map only partitions used by local HOST
  ...

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>

Author: arndb

Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml

@@ -23,6 +23,8 @@ properties:
     enum:
       - qcom,sc7180-llcc
       - qcom,sc7280-llcc
+      - qcom,sc8180x-llcc
+      - qcom,sc8280xp-llcc
       - qcom,sdm845-llcc
       - qcom,sm6350-llcc
       - qcom,sm8150-llcc

Documentation/devicetree/bindings/arm/qcom.yaml

@@ -39,8 +39,11 @@ description: |
         msm8994
         msm8996
         sa8155p
+        sa8540p
         sc7180
         sc7280
+        sc8180x
+        sc8280xp
         sdm630
         sdm632
         sdm660
@@ -225,6 +228,18 @@ properties:
               - google,senor
           - const: qcom,sc7280
 
+      - items:
+          - enum:
+              - lenovo,flex-5g
+              - microsoft,surface-prox
+              - qcom,sc8180x-primus
+          - const: qcom,sc8180x
+
+      - items:
+          - enum:
+              - qcom,sc8280xp-qrd
+          - const: qcom,sc8280xp
+
       - items:
           - enum:
               - fairphone,fp3
@@ -258,6 +273,11 @@ properties:
               - qcom,sa8155p-adp
           - const: qcom,sa8155p
 
+      - items:
+          - enum:
+              - qcom,sa8295p-adp
+          - const: qcom,sa8540p
+
       - items:
           - enum:
               - fairphone,fp4

Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml

@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/qcom,ssc-block-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The AHB Bus Providing a Global View of the SSC Block on (some) qcom SoCs
+
+maintainers:
+  - Michael Srba <[email protected]>
+
+description: |
+  This binding describes the dependencies (clocks, resets, power domains) which
+  need to be turned on in a sequence before communication over the AHB bus
+  becomes possible.
+
+  Additionally, the reg property is used to pass to the driver the location of
+  two sadly undocumented registers which need to be poked as part of the sequence.
+
+  The SSC (Snapdragon Sensor Core) block contains a gpio controller, i2c/spi/uart
+  controllers, a hexagon core, and a clock controller which provides clocks for
+  the above.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,msm8998-ssc-block-bus
+      - const: qcom,ssc-block-bus
+
+  reg:
+    description: |
+      Shall contain the addresses of the SSCAON_CONFIG0 and SSCAON_CONFIG1
+      registers
+    minItems: 2
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: mpm_sscaon_config0
+      - const: mpm_sscaon_config1
+
+  '#address-cells':
+    enum: [ 1, 2 ]
+
+  '#size-cells':
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  clocks:
+    minItems: 6
+    maxItems: 6
+
+  clock-names:
+    items:
+      - const: xo
+      - const: aggre2
+      - const: gcc_im_sleep
+      - const: aggre2_north
+      - const: ssc_xo
+      - const: ssc_ahbs
+
+  power-domains:
+    description: Power domain phandles for the ssc_cx and ssc_mx power domains
+    minItems: 2
+    maxItems: 2
+
+  power-domain-names:
+    items:
+      - const: ssc_cx
+      - const: ssc_mx
+
+  resets:
+    description: |
+      Reset phandles for the ssc_reset and ssc_bcr resets (note: ssc_bcr is the
+      branch control register associated with the ssc_xo and ssc_ahbs clocks)
+    minItems: 2
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: ssc_reset
+      - const: ssc_bcr
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: describes how to locate the ssc AXI halt register
+    items:
+      - items:
+          - description: Phandle reference to a syscon representing TCSR
+          - description: offset for the ssc AXI halt register
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - '#address-cells'
+  - '#size-cells'
+  - ranges
+  - clocks
+  - clock-names
+  - power-domains
+  - power-domain-names
+  - resets
+  - reset-names
+  - qcom,halt-regs
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        // devices under this node are physically located in the SSC block, connected to an ssc-internal bus;
+        ssc_ahb_slave: bus@10ac008 {
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges;
+
+            compatible = "qcom,msm8998-ssc-block-bus", "qcom,ssc-block-bus";
+            reg = <0x10ac008 0x4>, <0x10ac010 0x4>;
+            reg-names = "mpm_sscaon_config0", "mpm_sscaon_config1";
+
+            clocks = <&xo>,
+                     <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
+                     <&gcc GCC_IM_SLEEP>,
+                     <&gcc AGGRE2_SNOC_NORTH_AXI>,
+                     <&gcc SSC_XO>,
+                     <&gcc SSC_CNOC_AHBS_CLK>;
+            clock-names = "xo", "aggre2", "gcc_im_sleep", "aggre2_north", "ssc_xo", "ssc_ahbs";
+
+            resets = <&gcc GCC_SSC_RESET>, <&gcc GCC_SSC_BCR>;
+            reset-names = "ssc_reset", "ssc_bcr";
+
+            power-domains = <&rpmpd MSM8998_SSCCX>, <&rpmpd MSM8998_SSCMX>;
+            power-domain-names = "ssc_cx", "ssc_mx";
+
+            qcom,halt-regs = <&tcsr_mutex_regs 0x26000>;
+        };
+    };

Documentation/devicetree/bindings/firmware/qcom,scm.txt

@@ -19,6 +19,7 @@ Required properties:
  * "qcom,scm-msm8953"
  * "qcom,scm-msm8960"
  * "qcom,scm-msm8974"
+ * "qcom,scm-msm8976"
  * "qcom,scm-msm8994"
  * "qcom,scm-msm8996"
  * "qcom,scm-msm8998"
@@ -37,7 +38,7 @@ Required properties:
  * core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660" and
    "qcom,scm-msm8960"
  * core, iface and bus clocks required for "qcom,scm-apq8084",
-   "qcom,scm-msm8916", "qcom,scm-msm8953" and "qcom,scm-msm8974"
+   "qcom,scm-msm8916", "qcom,scm-msm8953", "qcom,scm-msm8974" and "qcom,scm-msm8976"
 - clock-names: Must contain "core" for the core clock, "iface" for the interface
   clock and "bus" for the bus clock per the requirements of the compatible.
 - qcom,dload-mode: phandle to the TCSR hardware block and offset of the

Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml

@@ -45,20 +45,20 @@ additionalProperties: false
 
 examples:
   # Example 1: apps bcm_voter on SDM845 SoC should be defined inside &apps_rsc node
-  # as defined in Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
+  # as defined in Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
   - |
 
-    apps_bcm_voter: bcm_voter {
+    apps_bcm_voter: bcm-voter {
         compatible = "qcom,bcm-voter";
     };
 
   # Example 2: disp bcm_voter on SDM845 should be defined inside &disp_rsc node
-  # as defined in Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
+  # as defined in Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
   - |
 
     #include <dt-bindings/interconnect/qcom,icc.h>
 
-    disp_bcm_voter: bcm_voter {
+    disp_bcm_voter: bcm-voter {
         compatible = "qcom,bcm-voter";
         qcom,tcs-wait = <QCOM_ICC_TAG_AMC>;
     };

Documentation/devicetree/bindings/power/qcom,rpmpd.yaml

@@ -27,12 +27,15 @@ properties:
       - qcom,msm8998-rpmpd
       - qcom,qcm2290-rpmpd
       - qcom,qcs404-rpmpd
+      - qcom,sa8540p-rpmhpd
       - qcom,sdm660-rpmpd
       - qcom,sc7180-rpmhpd
       - qcom,sc7280-rpmhpd
       - qcom,sc8180x-rpmhpd
+      - qcom,sc8280xp-rpmhpd
       - qcom,sdm845-rpmhpd
       - qcom,sdx55-rpmhpd
+      - qcom,sdx65-rpmhpd
       - qcom,sm6115-rpmpd
       - qcom,sm6125-rpmpd
       - qcom,sm6350-rpmhpd

Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml

@@ -12,7 +12,7 @@ description:
   resides as a subnode of the SMD.  As such, the SMD-RPM regulator requires
   that the SMD and RPM nodes be present.
 
-  Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt for
+  Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml for
   information pertaining to the SMD node.
 
   Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
@@ -69,7 +69,8 @@ description:
   l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22
 
 maintainers:
-  - Kathiravan T <[email protected]>
+  - Andy Gross <[email protected]>
+  - Bjorn Andersson <[email protected]>
 
 properties:
   compatible:

Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt

@@ -250,7 +250,7 @@ the memory regions used by the Hexagon firmware. Each sub-node must contain:
 
 The Hexagon node may also have an subnode named either "smd-edge" or
 "glink-edge" that describes the communication edge, channels and devices
-related to the Hexagon.  See ../soc/qcom/qcom,smd.txt and
+related to the Hexagon.  See ../soc/qcom/qcom,smd.yaml and
 ../soc/qcom/qcom,glink.txt for details on how to describe these.
 
 = EXAMPLE

Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt

@@ -111,7 +111,7 @@ and its resource dependencies. It is described by the following properties:
 
 The wcnss node can also have an subnode named "smd-edge" that describes the SMD
 edge, channels and devices related to the WCNSS.
-See ../soc/qcom/qcom,smd.txt for details on how to describe the SMD edge.
+See ../soc/qcom/qcom,smd.yaml for details on how to describe the SMD edge.
 
 = EXAMPLE
 The following example describes the resources needed to boot control the WCNSS,