|
| 1 | +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| 2 | +%YAML 1.2 |
| 3 | +--- |
| 4 | +$id: http://devicetree.org/schemas/thermal/mediatek,lvts-thermal.yaml# |
| 5 | +$schema: http://devicetree.org/meta-schemas/core.yaml# |
| 6 | + |
| 7 | +title: MediaTek SoC Low Voltage Thermal Sensor (LVTS) |
| 8 | + |
| 9 | +maintainers: |
| 10 | + - Balsam CHIHI <[email protected]> |
| 11 | + |
| 12 | +description: | |
| 13 | + LVTS is a thermal management architecture composed of three subsystems, |
| 14 | + a Sensing device - Thermal Sensing Micro Circuit Unit (TSMCU), |
| 15 | + a Converter - Low Voltage Thermal Sensor converter (LVTS), and |
| 16 | + a Digital controller (LVTS_CTRL). |
| 17 | +
|
| 18 | +properties: |
| 19 | + compatible: |
| 20 | + enum: |
| 21 | + - mediatek,mt8192-lvts-ap |
| 22 | + - mediatek,mt8192-lvts-mcu |
| 23 | + - mediatek,mt8195-lvts-ap |
| 24 | + - mediatek,mt8195-lvts-mcu |
| 25 | + |
| 26 | + reg: |
| 27 | + maxItems: 1 |
| 28 | + |
| 29 | + interrupts: |
| 30 | + maxItems: 1 |
| 31 | + |
| 32 | + clocks: |
| 33 | + maxItems: 1 |
| 34 | + |
| 35 | + resets: |
| 36 | + maxItems: 1 |
| 37 | + description: LVTS reset for clearing temporary data on AP/MCU. |
| 38 | + |
| 39 | + nvmem-cells: |
| 40 | + minItems: 1 |
| 41 | + items: |
| 42 | + - description: Calibration eFuse data 1 for LVTS |
| 43 | + - description: Calibration eFuse data 2 for LVTS |
| 44 | + |
| 45 | + nvmem-cell-names: |
| 46 | + minItems: 1 |
| 47 | + items: |
| 48 | + - const: lvts-calib-data-1 |
| 49 | + - const: lvts-calib-data-2 |
| 50 | + |
| 51 | + "#thermal-sensor-cells": |
| 52 | + const: 1 |
| 53 | + |
| 54 | +allOf: |
| 55 | + - $ref: thermal-sensor.yaml# |
| 56 | + |
| 57 | + - if: |
| 58 | + properties: |
| 59 | + compatible: |
| 60 | + contains: |
| 61 | + enum: |
| 62 | + - mediatek,mt8192-lvts-ap |
| 63 | + - mediatek,mt8192-lvts-mcu |
| 64 | + then: |
| 65 | + properties: |
| 66 | + nvmem-cells: |
| 67 | + maxItems: 1 |
| 68 | + |
| 69 | + nvmem-cell-names: |
| 70 | + maxItems: 1 |
| 71 | + |
| 72 | + - if: |
| 73 | + properties: |
| 74 | + compatible: |
| 75 | + contains: |
| 76 | + enum: |
| 77 | + - mediatek,mt8195-lvts-ap |
| 78 | + - mediatek,mt8195-lvts-mcu |
| 79 | + then: |
| 80 | + properties: |
| 81 | + nvmem-cells: |
| 82 | + minItems: 2 |
| 83 | + |
| 84 | + nvmem-cell-names: |
| 85 | + minItems: 2 |
| 86 | + |
| 87 | +required: |
| 88 | + - compatible |
| 89 | + - reg |
| 90 | + - interrupts |
| 91 | + - clocks |
| 92 | + - resets |
| 93 | + - nvmem-cells |
| 94 | + - nvmem-cell-names |
| 95 | + - "#thermal-sensor-cells" |
| 96 | + |
| 97 | +additionalProperties: false |
| 98 | + |
| 99 | +examples: |
| 100 | + - | |
| 101 | + #include <dt-bindings/interrupt-controller/arm-gic.h> |
| 102 | + #include <dt-bindings/clock/mt8195-clk.h> |
| 103 | + #include <dt-bindings/reset/mt8195-resets.h> |
| 104 | + #include <dt-bindings/thermal/mediatek,lvts-thermal.h> |
| 105 | +
|
| 106 | + soc { |
| 107 | + #address-cells = <2>; |
| 108 | + #size-cells = <2>; |
| 109 | +
|
| 110 | + lvts_mcu: thermal-sensor@11278000 { |
| 111 | + compatible = "mediatek,mt8195-lvts-mcu"; |
| 112 | + reg = <0 0x11278000 0 0x1000>; |
| 113 | + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>; |
| 114 | + clocks = <&infracfg_ao CLK_INFRA_AO_THERM>; |
| 115 | + resets = <&infracfg_ao MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST>; |
| 116 | + nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>; |
| 117 | + nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2"; |
| 118 | + #thermal-sensor-cells = <1>; |
| 119 | + }; |
| 120 | + }; |
| 121 | +
|
| 122 | + thermal_zones: thermal-zones { |
| 123 | + cpu0-thermal { |
| 124 | + polling-delay = <1000>; |
| 125 | + polling-delay-passive = <250>; |
| 126 | + thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU0>; |
| 127 | +
|
| 128 | + trips { |
| 129 | + cpu0_alert: trip-alert { |
| 130 | + temperature = <85000>; |
| 131 | + hysteresis = <2000>; |
| 132 | + type = "passive"; |
| 133 | + }; |
| 134 | +
|
| 135 | + cpu0_crit: trip-crit { |
| 136 | + temperature = <100000>; |
| 137 | + hysteresis = <2000>; |
| 138 | + type = "critical"; |
| 139 | + }; |
| 140 | + }; |
| 141 | + }; |
| 142 | + }; |
0 commit comments