leds: leds-lp55xx: Drop deprecated defines

Drop deprecated defines not used anymore as the related function got
moved to lp55xx-common.

Signed-off-by: Christian Marangi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>

Author: Ansuel

drivers/leds/leds-lp5521.c

@@ -21,7 +21,6 @@
 
 #include "leds-lp55xx-common.h"
 
-#define LP5521_PROGRAM_LENGTH		32
 #define LP5521_MAX_LEDS			3
 #define LP5521_CMD_DIRECT		0x3F
 
@@ -73,29 +72,6 @@
 /* Reset register value */
 #define LP5521_RESET			0xFF
 
-/* Program Memory Operations */
-#define LP5521_MODE_R_M			0x30	/* Operation Mode Register */
-#define LP5521_MODE_G_M			0x0C
-#define LP5521_MODE_B_M			0x03
-#define LP5521_LOAD_R			0x10
-#define LP5521_LOAD_G			0x04
-#define LP5521_LOAD_B			0x01
-
-#define LP5521_R_IS_LOADING(mode)	\
-	((mode & LP5521_MODE_R_M) == LP5521_LOAD_R)
-#define LP5521_G_IS_LOADING(mode)	\
-	((mode & LP5521_MODE_G_M) == LP5521_LOAD_G)
-#define LP5521_B_IS_LOADING(mode)	\
-	((mode & LP5521_MODE_B_M) == LP5521_LOAD_B)
-
-#define LP5521_EXEC_R_M			0x30	/* Enable Register */
-#define LP5521_EXEC_G_M			0x0C
-#define LP5521_EXEC_B_M			0x03
-#define LP5521_EXEC_M			0x3F
-#define LP5521_RUN_R			0x20
-#define LP5521_RUN_G			0x08
-#define LP5521_RUN_B			0x02
-
 static inline void lp5521_wait_opmode_done(void)
 {
 	/* operation mode change needs to be longer than 153 us */

drivers/leds/leds-lp5523.c

@@ -73,54 +73,8 @@
 #define LP5523_EXT_CLK_USED		0x08
 #define LP5523_ENG_STATUS_MASK		0x07
 
-#define LP5523_FADER_MAPPING_MASK	0xC0
-#define LP5523_FADER_MAPPING_SHIFT	6
-
-/* Memory Page Selection */
-#define LP5523_PAGE_ENG1		0
-#define LP5523_PAGE_ENG2		1
-#define LP5523_PAGE_ENG3		2
-#define LP5523_PAGE_MUX1		3
-#define LP5523_PAGE_MUX2		4
-#define LP5523_PAGE_MUX3		5
-
-/* Program Memory Operations */
-#define LP5523_MODE_ENG1_M		0x30	/* Operation Mode Register */
-#define LP5523_MODE_ENG2_M		0x0C
-#define LP5523_MODE_ENG3_M		0x03
-#define LP5523_LOAD_ENG1		0x10
-#define LP5523_LOAD_ENG2		0x04
-#define LP5523_LOAD_ENG3		0x01
-
-#define LP5523_ENG1_IS_LOADING(mode)	\
-	((mode & LP5523_MODE_ENG1_M) == LP5523_LOAD_ENG1)
-#define LP5523_ENG2_IS_LOADING(mode)	\
-	((mode & LP5523_MODE_ENG2_M) == LP5523_LOAD_ENG2)
-#define LP5523_ENG3_IS_LOADING(mode)	\
-	((mode & LP5523_MODE_ENG3_M) == LP5523_LOAD_ENG3)
-
-#define LP5523_EXEC_ENG1_M		0x30	/* Enable Register */
-#define LP5523_EXEC_ENG2_M		0x0C
-#define LP5523_EXEC_ENG3_M		0x03
-#define LP5523_EXEC_M			0x3F
-#define LP5523_RUN_ENG1			0x20
-#define LP5523_RUN_ENG2			0x08
-#define LP5523_RUN_ENG3			0x02
-
-#define LED_ACTIVE(mux, led)		(!!(mux & (0x0001 << led)))
-
-enum lp5523_chip_id {
-	LP5523,
-	LP55231,
-};
-
 static int lp5523_init_program_engine(struct lp55xx_chip *chip);
 
-static inline void lp5523_wait_opmode_done(void)
-{
-	usleep_range(1000, 2000);
-}
-
 static int lp5523_post_init_device(struct lp55xx_chip *chip)
 {
 	int ret;

drivers/leds/leds-lp5562.c

@@ -37,21 +37,6 @@
 
 /* OPMODE Register 01h */
 #define LP5562_REG_OP_MODE		0x01
-#define LP5562_MODE_ENG1_M		0x30
-#define LP5562_MODE_ENG2_M		0x0C
-#define LP5562_MODE_ENG3_M		0x03
-#define LP5562_LOAD_ENG1		0x10
-#define LP5562_LOAD_ENG2		0x04
-#define LP5562_LOAD_ENG3		0x01
-#define LP5562_RUN_ENG1			0x20
-#define LP5562_RUN_ENG2			0x08
-#define LP5562_RUN_ENG3			0x02
-#define LP5562_ENG1_IS_LOADING(mode)	\
-	((mode & LP5562_MODE_ENG1_M) == LP5562_LOAD_ENG1)
-#define LP5562_ENG2_IS_LOADING(mode)	\
-	((mode & LP5562_MODE_ENG2_M) == LP5562_LOAD_ENG2)
-#define LP5562_ENG3_IS_LOADING(mode)	\
-	((mode & LP5562_MODE_ENG3_M) == LP5562_LOAD_ENG3)
 
 /* BRIGHTNESS Registers */
 #define LP5562_REG_R_PWM		0x04

drivers/leds/leds-lp8501.c

@@ -20,28 +20,14 @@
 
 #include "leds-lp55xx-common.h"
 
-#define LP8501_PROGRAM_LENGTH		32
 #define LP8501_PAGES_PER_ENGINE		1
 #define LP8501_MAX_LEDS			9
 
 /* Registers */
 #define LP8501_REG_ENABLE		0x00
 #define LP8501_ENABLE			BIT(6)
-#define LP8501_EXEC_M			0x3F
-#define LP8501_EXEC_ENG1_M		0x30
-#define LP8501_EXEC_ENG2_M		0x0C
-#define LP8501_EXEC_ENG3_M		0x03
-#define LP8501_RUN_ENG1			0x20
-#define LP8501_RUN_ENG2			0x08
-#define LP8501_RUN_ENG3			0x02
 
 #define LP8501_REG_OP_MODE		0x01
-#define LP8501_MODE_ENG1_M		0x30
-#define LP8501_MODE_ENG2_M		0x0C
-#define LP8501_MODE_ENG3_M		0x03
-#define LP8501_LOAD_ENG1		0x10
-#define LP8501_LOAD_ENG2		0x04
-#define LP8501_LOAD_ENG3		0x01
 
 #define LP8501_REG_PWR_CONFIG		0x05
 #define LP8501_PWR_CONFIG_M		0x03
@@ -65,25 +51,8 @@
 #define LP8501_REG_RESET		0x3D
 #define LP8501_RESET			0xFF
 
-#define LP8501_REG_PROG_PAGE_SEL	0x4F
-#define LP8501_PAGE_ENG1		0
-#define LP8501_PAGE_ENG2		1
-#define LP8501_PAGE_ENG3		2
-
 #define LP8501_REG_PROG_MEM		0x50
 
-#define LP8501_ENG1_IS_LOADING(mode)	\
-	((mode & LP8501_MODE_ENG1_M) == LP8501_LOAD_ENG1)
-#define LP8501_ENG2_IS_LOADING(mode)	\
-	((mode & LP8501_MODE_ENG2_M) == LP8501_LOAD_ENG2)
-#define LP8501_ENG3_IS_LOADING(mode)	\
-	((mode & LP8501_MODE_ENG3_M) == LP8501_LOAD_ENG3)
-
-static inline void lp8501_wait_opmode_done(void)
-{
-	usleep_range(1000, 2000);
-}
-
 static int lp8501_post_init_device(struct lp55xx_chip *chip)
 {
 	int ret;