usb: typec: tcpci: Prevent Sink disconnection before vPpsShutdown in SPR PPS

The Source can drop its output voltage to the minimum of the requested
PPS APDO voltage range when it is in Current Limit Mode. If this voltage
falls within the range of vPpsShutdown, the Source initiates a Hard
Reset and discharges Vbus. However, currently the Sink may disconnect
before the voltage reaches vPpsShutdown, leading to unexpected behavior.

Prevent premature disconnection by setting the Sink's disconnect
threshold to the minimum vPpsShutdown value. Additionally, consider the
voltage drop due to IR drop when calculating the appropriate threshold.
This ensures a robust and reliable interaction between the Source and
Sink during SPR PPS Current Limit Mode operation.

Fixes: 4288deb ("usb: typec: tcpci: Fix up sink disconnect thresholds for PD")
Cc: stable <[email protected]>
Signed-off-by: Kyle Tso <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Reviewed-by: Badhri Jagan Sridharan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

Author: kyletsoadl

drivers/usb/typec/tcpm/tcpci.c

@@ -27,6 +27,7 @@
 #define	VPPS_NEW_MIN_PERCENT			95
 #define	VPPS_VALID_MIN_MV			100
 #define	VSINKDISCONNECT_PD_MIN_PERCENT		90
+#define	VPPS_SHUTDOWN_MIN_PERCENT		85
 
 struct tcpci {
 	struct device *dev;
@@ -366,7 +367,8 @@ static int tcpci_enable_auto_vbus_discharge(struct tcpc_dev *dev, bool enable)
 }
 
 static int tcpci_set_auto_vbus_discharge_threshold(struct tcpc_dev *dev, enum typec_pwr_opmode mode,
-						   bool pps_active, u32 requested_vbus_voltage_mv)
+						   bool pps_active, u32 requested_vbus_voltage_mv,
+						   u32 apdo_min_voltage_mv)
 {
 	struct tcpci *tcpci = tcpc_to_tcpci(dev);
 	unsigned int pwr_ctrl, threshold = 0;
@@ -388,9 +390,12 @@ static int tcpci_set_auto_vbus_discharge_threshold(struct tcpc_dev *dev, enum ty
 		threshold = AUTO_DISCHARGE_DEFAULT_THRESHOLD_MV;
 	} else if (mode == TYPEC_PWR_MODE_PD) {
 		if (pps_active)
-			threshold = ((VPPS_NEW_MIN_PERCENT * requested_vbus_voltage_mv / 100) -
-				     VSINKPD_MIN_IR_DROP_MV - VPPS_VALID_MIN_MV) *
-				     VSINKDISCONNECT_PD_MIN_PERCENT / 100;
+			/*
+			 * To prevent disconnect when the source is in Current Limit Mode.
+			 * Set the threshold to the lowest possible voltage vPpsShutdown (min)
+			 */
+			threshold = VPPS_SHUTDOWN_MIN_PERCENT * apdo_min_voltage_mv / 100 -
+				    VSINKPD_MIN_IR_DROP_MV;
 		else
 			threshold = ((VSRC_NEW_MIN_PERCENT * requested_vbus_voltage_mv / 100) -
 				     VSINKPD_MIN_IR_DROP_MV - VSRC_VALID_MIN_MV) *

drivers/usb/typec/tcpm/tcpm.c

@@ -2974,10 +2974,12 @@ static int tcpm_set_auto_vbus_discharge_threshold(struct tcpm_port *port,
 		return 0;
 
 	ret = port->tcpc->set_auto_vbus_discharge_threshold(port->tcpc, mode, pps_active,
-							    requested_vbus_voltage);
+							    requested_vbus_voltage,
+							    port->pps_data.min_volt);
 	tcpm_log_force(port,
-		       "set_auto_vbus_discharge_threshold mode:%d pps_active:%c vbus:%u ret:%d",
-		       mode, pps_active ? 'y' : 'n', requested_vbus_voltage, ret);
+		       "set_auto_vbus_discharge_threshold mode:%d pps_active:%c vbus:%u pps_apdo_min_volt:%u ret:%d",
+		       mode, pps_active ? 'y' : 'n', requested_vbus_voltage,
+		       port->pps_data.min_volt, ret);
 
 	return ret;
 }

include/linux/usb/tcpm.h

@@ -163,7 +163,8 @@ struct tcpc_dev {
 	void (*frs_sourcing_vbus)(struct tcpc_dev *dev);
 	int (*enable_auto_vbus_discharge)(struct tcpc_dev *dev, bool enable);
 	int (*set_auto_vbus_discharge_threshold)(struct tcpc_dev *dev, enum typec_pwr_opmode mode,
-						 bool pps_active, u32 requested_vbus_voltage);
+						 bool pps_active, u32 requested_vbus_voltage,
+						 u32 pps_apdo_min_voltage);
 	bool (*is_vbus_vsafe0v)(struct tcpc_dev *dev);
 	void (*set_partner_usb_comm_capable)(struct tcpc_dev *dev, bool enable);
 	void (*check_contaminant)(struct tcpc_dev *dev);