drm/i915/dp: Reject HBR3 when sink doesn't support TPS4

According to the DP spec TPS4 is mandatory for HBR3. We have
however seen some broken eDP sinks that violate this and
declare support for HBR3 without TPS4 support.

At least in the case of the icl Dell XPS 13 7390 this results
in an unstable output.

Reject HBR3 when TPS4 supports is unavailable on the sink.

v2: Leave breadcrumbs in dmesg to avoid head scratching (Jani)

Cc: [email protected]
Cc: Jani Nikula <[email protected]>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/5969
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Jani Nikula <[email protected]>
(cherry picked from commit 38188a7)
Signed-off-by: Jani Nikula <[email protected]>

Author: vsyrjala

drivers/gpu/drm/i915/display/intel_dp.c

@@ -172,10 +172,28 @@ int intel_dp_link_symbol_clock(int rate)
 
 static int max_dprx_rate(struct intel_dp *intel_dp)
 {
+	struct intel_display *display = to_intel_display(intel_dp);
+	struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
+	int max_rate;
+
 	if (intel_dp_tunnel_bw_alloc_is_enabled(intel_dp))
-		return drm_dp_tunnel_max_dprx_rate(intel_dp->tunnel);
+		max_rate = drm_dp_tunnel_max_dprx_rate(intel_dp->tunnel);
+	else
+		max_rate = drm_dp_bw_code_to_link_rate(intel_dp->dpcd[DP_MAX_LINK_RATE]);
 
-	return drm_dp_bw_code_to_link_rate(intel_dp->dpcd[DP_MAX_LINK_RATE]);
+	/*
+	 * Some broken eDP sinks illegally declare support for
+	 * HBR3 without TPS4, and are unable to produce a stable
+	 * output. Reject HBR3 when TPS4 is not available.
+	 */
+	if (max_rate >= 810000 && !drm_dp_tps4_supported(intel_dp->dpcd)) {
+		drm_dbg_kms(display->drm,
+			    "[ENCODER:%d:%s] Rejecting HBR3 due to missing TPS4 support\n",
+			    encoder->base.base.id, encoder->base.name);
+		max_rate = 540000;
+	}
+
+	return max_rate;
 }
 
 static int max_dprx_lane_count(struct intel_dp *intel_dp)
@@ -4170,6 +4188,9 @@ static void intel_edp_mso_init(struct intel_dp *intel_dp)
 static void
 intel_edp_set_sink_rates(struct intel_dp *intel_dp)
 {
+	struct intel_display *display = to_intel_display(intel_dp);
+	struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
+
 	intel_dp->num_sink_rates = 0;
 
 	if (intel_dp->edp_dpcd[0] >= DP_EDP_14) {
@@ -4180,18 +4201,32 @@ intel_edp_set_sink_rates(struct intel_dp *intel_dp)
 				 sink_rates, sizeof(sink_rates));
 
 		for (i = 0; i < ARRAY_SIZE(sink_rates); i++) {
-			int val = le16_to_cpu(sink_rates[i]);
-
-			if (val == 0)
-				break;
+			int rate;
 
 			/* Value read multiplied by 200kHz gives the per-lane
 			 * link rate in kHz. The source rates are, however,
 			 * stored in terms of LS_Clk kHz. The full conversion
 			 * back to symbols is
 			 * (val * 200kHz)*(8/10 ch. encoding)*(1/8 bit to Byte)
 			 */
-			intel_dp->sink_rates[i] = (val * 200) / 10;
+			rate = le16_to_cpu(sink_rates[i]) * 200 / 10;
+
+			if (rate == 0)
+				break;
+
+			/*
+			 * Some broken eDP sinks illegally declare support for
+			 * HBR3 without TPS4, and are unable to produce a stable
+			 * output. Reject HBR3 when TPS4 is not available.
+			 */
+			if (rate >= 810000 && !drm_dp_tps4_supported(intel_dp->dpcd)) {
+				drm_dbg_kms(display->drm,
+					    "[ENCODER:%d:%s] Rejecting HBR3 due to missing TPS4 support\n",
+					    encoder->base.base.id, encoder->base.name);
+				break;
+			}
+
+			intel_dp->sink_rates[i] = rate;
 		}
 		intel_dp->num_sink_rates = i;
 	}