iommu/amd: Remove iommu_v2 module

AMD GPU driver which was the only in-kernel user of iommu_v2 module
removed dependency on iommu_v2 module.

Also we are working on adding SVA support in AMD IOMMU driver. Device
drivers are expected to use common SVA framework to enable device
PASID/PRI features.

Removing iommu_v2 module and then adding SVA simplifies the development.
Hence remove iommu_v2 module.

Cc: Alex Deucher <[email protected]>
Cc: Joerg Roedel <[email protected]>
Cc: Felix Kuehling <[email protected]>
Signed-off-by: Vasant Hegde <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Reviewed-by: Jerry Snitselaar <[email protected]>
Tested-by: Alex Deucher <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>

Author: hegdevasant

drivers/iommu/amd/Kconfig

@@ -22,15 +22,6 @@ config AMD_IOMMU
 	  your BIOS for an option to enable it or if you have an IVRS ACPI
 	  table.
 
-config AMD_IOMMU_V2
-	tristate "AMD IOMMU Version 2 driver"
-	depends on AMD_IOMMU
-	select MMU_NOTIFIER
-	help
-	  This option enables support for the AMD IOMMUv2 features of the IOMMU
-	  hardware. Select this option if you want to use devices that support
-	  the PCI PRI and PASID interface.
-
 config AMD_IOMMU_DEBUGFS
 	bool "Enable AMD IOMMU internals in DebugFS"
 	depends on AMD_IOMMU && IOMMU_DEBUGFS

drivers/iommu/amd/Makefile

@@ -1,4 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_AMD_IOMMU) += iommu.o init.o quirks.o io_pgtable.o io_pgtable_v2.o
 obj-$(CONFIG_AMD_IOMMU_DEBUGFS) += debugfs.o
-obj-$(CONFIG_AMD_IOMMU_V2) += iommu_v2.o

drivers/iommu/amd/amd_iommu.h

@@ -38,9 +38,6 @@ extern int amd_iommu_guest_ir;
 extern enum io_pgtable_fmt amd_iommu_pgtable;
 extern int amd_iommu_gpt_level;
 
-/* IOMMUv2 specific functions */
-struct iommu_domain;
-
 bool amd_iommu_v2_supported(void);
 struct amd_iommu *get_amd_iommu(unsigned int idx);
 u8 amd_iommu_pc_get_max_banks(unsigned int idx);
@@ -57,8 +54,6 @@ void amd_iommu_pdev_disable_cap_pri(struct pci_dev *pdev);
 
 int amd_iommu_register_ppr_notifier(struct notifier_block *nb);
 int amd_iommu_unregister_ppr_notifier(struct notifier_block *nb);
-void amd_iommu_domain_direct_map(struct iommu_domain *dom);
-int amd_iommu_domain_enable_v2(struct iommu_domain *dom, int pasids);
 int amd_iommu_flush_page(struct iommu_domain *dom, u32 pasid, u64 address);
 void amd_iommu_update_and_flush_device_table(struct protection_domain *domain);
 void amd_iommu_domain_update(struct protection_domain *domain);

drivers/iommu/amd/iommu.c

@@ -2568,46 +2568,6 @@ int amd_iommu_unregister_ppr_notifier(struct notifier_block *nb)
 }
 EXPORT_SYMBOL(amd_iommu_unregister_ppr_notifier);
 
-void amd_iommu_domain_direct_map(struct iommu_domain *dom)
-{
-	struct protection_domain *domain = to_pdomain(dom);
-	unsigned long flags;
-
-	spin_lock_irqsave(&domain->lock, flags);
-
-	if (domain->iop.pgtbl_cfg.tlb)
-		free_io_pgtable_ops(&domain->iop.iop.ops);
-
-	spin_unlock_irqrestore(&domain->lock, flags);
-}
-EXPORT_SYMBOL(amd_iommu_domain_direct_map);
-
-int amd_iommu_domain_enable_v2(struct iommu_domain *dom, int pasids)
-{
-	struct protection_domain *pdom = to_pdomain(dom);
-	unsigned long flags;
-	int ret;
-
-	spin_lock_irqsave(&pdom->lock, flags);
-
-	/*
-	 * Save us all sanity checks whether devices already in the
-	 * domain support IOMMUv2. Just force that the domain has no
-	 * devices attached when it is switched into IOMMUv2 mode.
-	 */
-	ret = -EBUSY;
-	if (pdom->dev_cnt > 0 || pdom->flags & PD_IOMMUV2_MASK)
-		goto out;
-
-	if (!pdom->gcr3_tbl)
-		ret = setup_gcr3_table(pdom, pasids);
-
-out:
-	spin_unlock_irqrestore(&pdom->lock, flags);
-	return ret;
-}
-EXPORT_SYMBOL(amd_iommu_domain_enable_v2);
-
 static int __flush_pasid(struct protection_domain *domain, u32 pasid,
 			 u64 address, bool size)
 {