Merge tag 'net-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
 "Including fixes from netfilter.

  There is a recently notified BT regression with no fix yet. I do not
  think a fix will land in the next week.

  Current release - regressions:

   - core: tighten bad gso csum offset check in virtio_net_hdr

   - netfilter: move nf flowtable bpf initialization in
     nf_flow_table_module_init()

   - eth: ice: stop calling pci_disable_device() as we use pcim

   - eth: fou: fix null-ptr-deref in GRO.

  Current release - new code bugs:

   - hsr: prevent NULL pointer dereference in hsr_proxy_announce()

  Previous releases - regressions:

   - hsr: remove seqnr_lock

   - netfilter: nft_socket: fix sk refcount leaks

   - mptcp: pm: fix uaf in __timer_delete_sync

   - phy: dp83822: fix NULL pointer dereference on DP83825 devices

   - eth: revert "virtio_net: rx enable premapped mode by default"

   - eth: octeontx2-af: Modify SMQ flush sequence to drop packets

  Previous releases - always broken:

   - eth: mlx5: fix bridge mode operations when there are no VFs

   - eth: igb: Always call igb_xdp_ring_update_tail() under Tx lock"

* tag 'net-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
  net: netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init()
  net: tighten bad gso csum offset check in virtio_net_hdr
  netlink: specs: mptcp: fix port endianness
  net: dpaa: Pad packets to ETH_ZLEN
  mptcp: pm: Fix uaf in __timer_delete_sync
  net: libwx: fix number of Rx and Tx descriptors
  net: dsa: felix: ignore pending status of TAS module when it's disabled
  net: hsr: prevent NULL pointer dereference in hsr_proxy_announce()
  selftests: mptcp: include net_helper.sh file
  selftests: mptcp: include lib.sh file
  selftests: mptcp: join: restrict fullmesh endp on 1st sf
  netfilter: nft_socket: make cgroupsv2 matching work with namespaces
  netfilter: nft_socket: fix sk refcount leaks
  MAINTAINERS: Add ethtool pse-pd to PSE NETWORK DRIVER
  dt-bindings: net: tja11xx: fix the broken binding
  selftests: net: csum: Fix checksums for packets with non-zero padding
  net: phy: dp83822: Fix NULL pointer dereference on DP83825 devices
  virtio_net: disable premapped mode by default
  Revert "virtio_net: big mode skip the unmap check"
  Revert "virtio_net: rx remove premapped failover code"
  ...

Author: torvalds

Documentation/devicetree/bindings/net/nxp,tja11xx.yaml

@@ -14,8 +14,53 @@ maintainers:
 description:
   Bindings for NXP TJA11xx automotive PHYs
 
+properties:
+  compatible:
+    enum:
+      - ethernet-phy-id0180.dc40
+      - ethernet-phy-id0180.dc41
+      - ethernet-phy-id0180.dc48
+      - ethernet-phy-id0180.dd00
+      - ethernet-phy-id0180.dd01
+      - ethernet-phy-id0180.dd02
+      - ethernet-phy-id0180.dc80
+      - ethernet-phy-id0180.dc82
+      - ethernet-phy-id001b.b010
+      - ethernet-phy-id001b.b013
+      - ethernet-phy-id001b.b030
+      - ethernet-phy-id001b.b031
+
 allOf:
   - $ref: ethernet-phy.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ethernet-phy-id0180.dc40
+              - ethernet-phy-id0180.dc41
+              - ethernet-phy-id0180.dc48
+              - ethernet-phy-id0180.dd00
+              - ethernet-phy-id0180.dd01
+              - ethernet-phy-id0180.dd02
+
+    then:
+      properties:
+        nxp,rmii-refclk-in:
+          type: boolean
+          description: |
+            The REF_CLK is provided for both transmitted and received data
+            in RMII mode. This clock signal is provided by the PHY and is
+            typically derived from an external 25MHz crystal. Alternatively,
+            a 50MHz clock signal generated by an external oscillator can be
+            connected to pin REF_CLK. A third option is to connect a 25MHz
+            clock to pin CLK_IN_OUT. So, the REF_CLK should be configured
+            as input or output according to the actual circuit connection.
+            If present, indicates that the REF_CLK will be configured as
+            interface reference clock input when RMII mode enabled.
+            If not present, the REF_CLK will be configured as interface
+            reference clock output when RMII mode enabled.
+            Only supported on TJA1100 and TJA1101.
 
 patternProperties:
   "^ethernet-phy@[0-9a-f]+$":
@@ -32,22 +77,6 @@ patternProperties:
         description:
           The ID number for the child PHY. Should be +1 of parent PHY.
 
-      nxp,rmii-refclk-in:
-        type: boolean
-        description: |
-          The REF_CLK is provided for both transmitted and received data
-          in RMII mode. This clock signal is provided by the PHY and is
-          typically derived from an external 25MHz crystal. Alternatively,
-          a 50MHz clock signal generated by an external oscillator can be
-          connected to pin REF_CLK. A third option is to connect a 25MHz
-          clock to pin CLK_IN_OUT. So, the REF_CLK should be configured
-          as input or output according to the actual circuit connection.
-          If present, indicates that the REF_CLK will be configured as
-          interface reference clock input when RMII mode enabled.
-          If not present, the REF_CLK will be configured as interface
-          reference clock output when RMII mode enabled.
-          Only supported on TJA1100 and TJA1101.
-
     required:
       - reg
 
@@ -60,6 +89,7 @@ examples:
         #size-cells = <0>;
 
         tja1101_phy0: ethernet-phy@4 {
+            compatible = "ethernet-phy-id0180.dc40";
             reg = <0x4>;
             nxp,rmii-refclk-in;
         };

Documentation/netlink/specs/mptcp_pm.yaml

@@ -109,7 +109,6 @@ attribute-sets:
       -
         name: port
         type: u16
-        byte-order: big-endian
       -
         name: flags
         type: u32

MAINTAINERS

@@ -18407,6 +18407,7 @@ L:	[email protected]
 S:	Maintained
 F:	Documentation/devicetree/bindings/net/pse-pd/
 F:	drivers/net/pse-pd/
+F:	net/ethtool/pse-pd.c
 
 PSTORE FILESYSTEM
 M:	Kees Cook <[email protected]>

drivers/net/dsa/ocelot/felix_vsc9959.c

@@ -1474,10 +1474,13 @@ static int vsc9959_qos_port_tas_set(struct ocelot *ocelot, int port,
 	/* Hardware errata -  Admin config could not be overwritten if
 	 * config is pending, need reset the TAS module
 	 */
-	val = ocelot_read(ocelot, QSYS_PARAM_STATUS_REG_8);
-	if (val & QSYS_PARAM_STATUS_REG_8_CONFIG_PENDING) {
-		ret = -EBUSY;
-		goto err_reset_tc;
+	val = ocelot_read_rix(ocelot, QSYS_TAG_CONFIG, port);
+	if (val & QSYS_TAG_CONFIG_ENABLE) {
+		val = ocelot_read(ocelot, QSYS_PARAM_STATUS_REG_8);
+		if (val & QSYS_PARAM_STATUS_REG_8_CONFIG_PENDING) {
+			ret = -EBUSY;
+			goto err_reset_tc;
+		}
 	}
 
 	ocelot_rmw_rix(ocelot,

drivers/net/ethernet/faraday/ftgmac100.h

@@ -84,7 +84,7 @@
 			    FTGMAC100_INT_RPKT_BUF)
 
 /* All the interrupts we care about */
-#define FTGMAC100_INT_ALL (FTGMAC100_INT_RPKT_BUF  |  \
+#define FTGMAC100_INT_ALL (FTGMAC100_INT_RXTX  |  \
 			   FTGMAC100_INT_BAD)
 
 /*

drivers/net/ethernet/freescale/dpaa/dpaa_eth.c

@@ -2272,12 +2272,12 @@ static netdev_tx_t
 dpaa_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
 {
 	const int queue_mapping = skb_get_queue_mapping(skb);
-	bool nonlinear = skb_is_nonlinear(skb);
 	struct rtnl_link_stats64 *percpu_stats;
 	struct dpaa_percpu_priv *percpu_priv;
 	struct netdev_queue *txq;
 	struct dpaa_priv *priv;
 	struct qm_fd fd;
+	bool nonlinear;
 	int offset = 0;
 	int err = 0;
 
@@ -2287,6 +2287,13 @@ dpaa_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
 
 	qm_fd_clear_fd(&fd);
 
+	/* Packet data is always read as 32-bit words, so zero out any part of
+	 * the skb which might be sent if we have to pad the packet
+	 */
+	if (__skb_put_padto(skb, ETH_ZLEN, false))
+		goto enomem;
+
+	nonlinear = skb_is_nonlinear(skb);
 	if (!nonlinear) {
 		/* We're going to store the skb backpointer at the beginning
 		 * of the data buffer, so we need a privately owned skb

drivers/net/ethernet/intel/ice/ice_lib.c

@@ -2413,13 +2413,6 @@ void ice_vsi_decfg(struct ice_vsi *vsi)
 	struct ice_pf *pf = vsi->back;
 	int err;
 
-	/* The Rx rule will only exist to remove if the LLDP FW
-	 * engine is currently stopped
-	 */
-	if (!ice_is_safe_mode(pf) && vsi->type == ICE_VSI_PF &&
-	    !test_bit(ICE_FLAG_FW_LLDP_AGENT, pf->flags))
-		ice_cfg_sw_lldp(vsi, false, false);
-
 	ice_rm_vsi_lan_cfg(vsi->port_info, vsi->idx);
 	err = ice_rm_vsi_rdma_cfg(vsi->port_info, vsi->idx);
 	if (err)
@@ -2764,6 +2757,14 @@ int ice_vsi_release(struct ice_vsi *vsi)
 		ice_rss_clean(vsi);
 
 	ice_vsi_close(vsi);
+
+	/* The Rx rule will only exist to remove if the LLDP FW
+	 * engine is currently stopped
+	 */
+	if (!ice_is_safe_mode(pf) && vsi->type == ICE_VSI_PF &&
+	    !test_bit(ICE_FLAG_FW_LLDP_AGENT, pf->flags))
+		ice_cfg_sw_lldp(vsi, false, false);
+
 	ice_vsi_decfg(vsi);
 
 	/* retain SW VSI data structure since it is needed to unregister and

drivers/net/ethernet/intel/ice/ice_main.c

@@ -5363,7 +5363,6 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
 	ice_deinit(pf);
 err_init:
 	ice_adapter_put(pdev);
-	pci_disable_device(pdev);
 	return err;
 }
 
@@ -5470,7 +5469,6 @@ static void ice_remove(struct pci_dev *pdev)
 	ice_set_wake(pf);
 
 	ice_adapter_put(pdev);
-	pci_disable_device(pdev);
 }
 
 /**

drivers/net/ethernet/intel/ice/ice_switch.c

@@ -3194,7 +3194,7 @@ ice_add_update_vsi_list(struct ice_hw *hw,
 
 		/* A rule already exists with the new VSI being added */
 		if (test_bit(vsi_handle, m_entry->vsi_list_info->vsi_map))
-			return 0;
+			return -EEXIST;
 
 		/* Update the previously created VSI list set with
 		 * the new VSI ID passed in
@@ -3264,7 +3264,7 @@ ice_find_vsi_list_entry(struct ice_hw *hw, u8 recp_id, u16 vsi_handle,
 
 	list_head = &sw->recp_list[recp_id].filt_rules;
 	list_for_each_entry(list_itr, list_head, list_entry) {
-		if (list_itr->vsi_list_info) {
+		if (list_itr->vsi_count == 1 && list_itr->vsi_list_info) {
 			map_info = list_itr->vsi_list_info;
 			if (test_bit(vsi_handle, map_info->vsi_map)) {
 				*vsi_list_id = map_info->vsi_list_id;

drivers/net/ethernet/intel/igb/igb_main.c

@@ -33,6 +33,7 @@
 #include <linux/bpf_trace.h>
 #include <linux/pm_runtime.h>
 #include <linux/etherdevice.h>
+#include <linux/lockdep.h>
 #ifdef CONFIG_IGB_DCA
 #include <linux/dca.h>
 #endif
@@ -2914,8 +2915,11 @@ static int igb_xdp(struct net_device *dev, struct netdev_bpf *xdp)
 	}
 }
 
+/* This function assumes __netif_tx_lock is held by the caller. */
 static void igb_xdp_ring_update_tail(struct igb_ring *ring)
 {
+	lockdep_assert_held(&txring_txq(ring)->_xmit_lock);
+
 	/* Force memory writes to complete before letting h/w know there
 	 * are new descriptors to fetch.
 	 */
@@ -3000,11 +3004,11 @@ static int igb_xdp_xmit(struct net_device *dev, int n,
 		nxmit++;
 	}
 
-	__netif_tx_unlock(nq);
-
 	if (unlikely(flags & XDP_XMIT_FLUSH))
 		igb_xdp_ring_update_tail(tx_ring);
 
+	__netif_tx_unlock(nq);
+
 	return nxmit;
 }
 
@@ -8864,12 +8868,14 @@ static void igb_put_rx_buffer(struct igb_ring *rx_ring,
 
 static int igb_clean_rx_irq(struct igb_q_vector *q_vector, const int budget)
 {
+	unsigned int total_bytes = 0, total_packets = 0;
 	struct igb_adapter *adapter = q_vector->adapter;
 	struct igb_ring *rx_ring = q_vector->rx.ring;
-	struct sk_buff *skb = rx_ring->skb;
-	unsigned int total_bytes = 0, total_packets = 0;
 	u16 cleaned_count = igb_desc_unused(rx_ring);
+	struct sk_buff *skb = rx_ring->skb;
+	int cpu = smp_processor_id();
 	unsigned int xdp_xmit = 0;
+	struct netdev_queue *nq;
 	struct xdp_buff xdp;
 	u32 frame_sz = 0;
 	int rx_buf_pgcnt;
@@ -8997,7 +9003,10 @@ static int igb_clean_rx_irq(struct igb_q_vector *q_vector, const int budget)
 	if (xdp_xmit & IGB_XDP_TX) {
 		struct igb_ring *tx_ring = igb_xdp_tx_queue_mapping(adapter);
 
+		nq = txring_txq(tx_ring);
+		__netif_tx_lock(nq, cpu);
 		igb_xdp_ring_update_tail(tx_ring);
+		__netif_tx_unlock(nq);
 	}
 
 	u64_stats_update_begin(&rx_ring->rx_syncp);