clk: imx6ul: fix enet1 gate configuration

According to the "i.MX 6UltraLite Applications Processor Reference Manual,
Rev. 2, 03/2017", BIT(13) is ENET1_125M_EN which is not controlling root
of PLL6. It is controlling ENET1 separately.

So, instead of this picture (implementation before this patch):
fec1 <- enet_ref (divider) <---------------------------,
                                                       |- pll6_enet (gate)
fec2 <- enet2_ref_125m (gate) <- enet2_ref (divider) <-´

we should have this one (after this patch):
fec1 <- enet1_ref_125m (gate) <- enet1_ref (divider) <-,
                                                       |- pll6_enet
fec2 <- enet2_ref_125m (gate) <- enet2_ref (divider) <-´

With this fix, the RMII reference clock will be turned off, after
setting network interface down on each separate interface
(ip l s dev eth0 down). Which was not working before, on system with both
FECs enabled.

Signed-off-by: Oleksij Rempel <[email protected]>
Reviewed-by: Abel Vesa <[email protected]>
Signed-off-by: Abel Vesa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

Author: olerem

drivers/clk/imx/clk-imx6ul.c

@@ -176,7 +176,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 	hws[IMX6UL_CLK_PLL3_USB_OTG]	= imx_clk_hw_gate("pll3_usb_otg",	"pll3_bypass", base + 0x10, 13);
 	hws[IMX6UL_CLK_PLL4_AUDIO]	= imx_clk_hw_gate("pll4_audio",	"pll4_bypass", base + 0x70, 13);
 	hws[IMX6UL_CLK_PLL5_VIDEO]	= imx_clk_hw_gate("pll5_video",	"pll5_bypass", base + 0xa0, 13);
-	hws[IMX6UL_CLK_PLL6_ENET]	= imx_clk_hw_gate("pll6_enet",	"pll6_bypass", base + 0xe0, 13);
+	hws[IMX6UL_CLK_PLL6_ENET]	= imx_clk_hw_fixed_factor("pll6_enet",	"pll6_bypass", 1, 1);
 	hws[IMX6UL_CLK_PLL7_USB_HOST]	= imx_clk_hw_gate("pll7_usb_host",	"pll7_bypass", base + 0x20, 13);
 
 	/*
@@ -205,12 +205,13 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 	hws[IMX6UL_CLK_PLL3_PFD2] = imx_clk_hw_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0,	 2);
 	hws[IMX6UL_CLK_PLL3_PFD3] = imx_clk_hw_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0,	 3);
 
-	hws[IMX6UL_CLK_ENET_REF] = clk_hw_register_divider_table(NULL, "enet_ref", "pll6_enet", 0,
+	hws[IMX6UL_CLK_ENET_REF] = clk_hw_register_divider_table(NULL, "enet1_ref", "pll6_enet", 0,
 			base + 0xe0, 0, 2, 0, clk_enet_ref_table, &imx_ccm_lock);
 	hws[IMX6UL_CLK_ENET2_REF] = clk_hw_register_divider_table(NULL, "enet2_ref", "pll6_enet", 0,
 			base + 0xe0, 2, 2, 0, clk_enet_ref_table, &imx_ccm_lock);
 
-	hws[IMX6UL_CLK_ENET2_REF_125M] = imx_clk_hw_gate("enet_ref_125m", "enet2_ref", base + 0xe0, 20);
+	hws[IMX6UL_CLK_ENET1_REF_125M] = imx_clk_hw_gate("enet1_ref_125m", "enet1_ref", base + 0xe0, 13);
+	hws[IMX6UL_CLK_ENET2_REF_125M] = imx_clk_hw_gate("enet2_ref_125m", "enet2_ref", base + 0xe0, 20);
 	hws[IMX6UL_CLK_ENET_PTP_REF]	= imx_clk_hw_fixed_factor("enet_ptp_ref", "pll6_enet", 1, 20);
 	hws[IMX6UL_CLK_ENET_PTP]	= imx_clk_hw_gate("enet_ptp", "enet_ptp_ref", base + 0xe0, 21);
 

include/dt-bindings/clock/imx6ul-clock.h

@@ -256,7 +256,8 @@
 #define IMX6UL_CLK_GPIO4		247
 #define IMX6UL_CLK_GPIO5		248
 #define IMX6UL_CLK_MMDC_P1_IPG		249
+#define IMX6UL_CLK_ENET1_REF_125M	250
 
-#define IMX6UL_CLK_END			250
+#define IMX6UL_CLK_END			251
 
 #endif /* __DT_BINDINGS_CLOCK_IMX6UL_H */