Merge branch 'efi/urgent' into efi/core, to pick up fixes

Signed-off-by: Ingo Molnar <[email protected]>

Author: Ingo Molnar

Documentation/admin-guide/acpi/fan_performance_states.rst

@@ -18,7 +18,7 @@ may look as follows::
 
  $ ls -l /sys/bus/acpi/devices/INT3404:00/
  total 0
-...
+ ...
  -r--r--r-- 1 root root 4096 Dec 13 20:38 state0
  -r--r--r-- 1 root root 4096 Dec 13 20:38 state1
  -r--r--r-- 1 root root 4096 Dec 13 20:38 state10
@@ -38,7 +38,7 @@ where each of the "state*" files represents one performance state of the fan
 and contains a colon-separated list of 5 integer numbers (fields) with the
 following interpretation::
 
-control_percent:trip_point_index:speed_rpm:noise_level_mdb:power_mw
+  control_percent:trip_point_index:speed_rpm:noise_level_mdb:power_mw
 
 * ``control_percent``: The percent value to be used to set the fan speed to a
   specific level using the _FSL object (0-100).

Documentation/admin-guide/bootconfig.rst

@@ -62,6 +62,30 @@ Or more shorter, written as following::
 In both styles, same key words are automatically merged when parsing it
 at boot time. So you can append similar trees or key-values.
 
+Same-key Values
+---------------
+
+It is prohibited that two or more values or arrays share a same-key.
+For example,::
+
+ foo = bar, baz
+ foo = qux  # !ERROR! we can not re-define same key
+
+If you want to append the value to existing key as an array member,
+you can use ``+=`` operator. For example::
+
+ foo = bar, baz
+ foo += qux
+
+In this case, the key ``foo`` has ``bar``, ``baz`` and ``qux``.
+
+However, a sub-key and a value can not co-exist under a parent key.
+For example, following config is NOT allowed.::
+
+ foo = value1
+ foo.bar = value2 # !ERROR! subkey "bar" and value "value1" can NOT co-exist
+
+
 Comments
 --------
 
@@ -102,9 +126,13 @@ Boot Kernel With a Boot Config
 ==============================
 
 Since the boot configuration file is loaded with initrd, it will be added
-to the end of the initrd (initramfs) image file. The Linux kernel decodes
-the last part of the initrd image in memory to get the boot configuration
-data.
+to the end of the initrd (initramfs) image file with size, checksum and
+12-byte magic word as below.
+
+[initrd][bootconfig][size(u32)][checksum(u32)][#BOOTCONFIG\n]
+
+The Linux kernel decodes the last part of the initrd image in memory to
+get the boot configuration data.
 Because of this "piggyback" method, there is no need to change or
 update the boot loader and the kernel image itself.
 

Documentation/admin-guide/kernel-parameters.txt

@@ -136,6 +136,10 @@
 			dynamic table installation which will install SSDT
 			tables to /sys/firmware/acpi/tables/dynamic.
 
+	acpi_no_watchdog	[HW,ACPI,WDT]
+			Ignore the ACPI-based watchdog interface (WDAT) and let
+			a native driver control the watchdog device instead.
+
 	acpi_rsdp=	[ACPI,EFI,KEXEC]
 			Pass the RSDP address to the kernel, mostly used
 			on machines running EFI runtime service to boot the

Documentation/dev-tools/kunit/usage.rst

@@ -551,6 +551,7 @@ options to your ``.config``:
 Once the kernel is built and installed, a simple
 
 .. code-block:: bash
+
 	modprobe example-test
 
 ...will run the tests.

Documentation/devicetree/bindings/arm/arm,scmi.txt

@@ -102,7 +102,7 @@ Required sub-node properties:
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
 [2] Documentation/devicetree/bindings/power/power-domain.yaml
 [3] Documentation/devicetree/bindings/thermal/thermal.txt
-[4] Documentation/devicetree/bindings/sram/sram.txt
+[4] Documentation/devicetree/bindings/sram/sram.yaml
 [5] Documentation/devicetree/bindings/reset/reset.txt
 
 Example:

Documentation/devicetree/bindings/arm/arm,scpi.txt

@@ -109,7 +109,7 @@ Required properties:
 [0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
 [2] Documentation/devicetree/bindings/thermal/thermal.txt
-[3] Documentation/devicetree/bindings/sram/sram.txt
+[3] Documentation/devicetree/bindings/sram/sram.yaml
 [4] Documentation/devicetree/bindings/power/power-domain.yaml
 
 Example:

Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt

@@ -62,7 +62,7 @@ Timer node:
 
 Syscon reboot node:
 
-See Documentation/devicetree/bindings/power/reset/syscon-reboot.txt for the
+See Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml for the
 detailed list of properties, the two values defined below are specific to the
 BCM6328-style timer:
 

Documentation/devicetree/bindings/arm/cpus.yaml

@@ -216,7 +216,7 @@ properties:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
     description: |
       List of phandles to idle state nodes supported
-      by this cpu (see ./idle-states.txt).
+      by this cpu (see ./idle-states.yaml).
 
   capacity-dmips-mhz:
     $ref: '/schemas/types.yaml#/definitions/uint32'

Documentation/devicetree/bindings/arm/fsl.yaml

@@ -160,7 +160,7 @@ properties:
         items:
           - enum:
               - armadeus,imx6dl-apf6      # APF6 (Solo) SoM
-              - armadeus,imx6dl-apf6dldev # APF6 (Solo) SoM on APF6Dev board
+              - armadeus,imx6dl-apf6dev   # APF6 (Solo) SoM on APF6Dev board
               - eckelmann,imx6dl-ci4x10
               - emtrion,emcon-mx6         # emCON-MX6S or emCON-MX6DL SoM
               - emtrion,emcon-mx6-avari   # emCON-MX6S or emCON-MX6DL SoM on Avari Base

Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt

@@ -1,7 +1,7 @@
 * Hisilicon Hi3519 System Controller Block
 
 This bindings use the following binding:
-Documentation/devicetree/bindings/mfd/syscon.txt
+Documentation/devicetree/bindings/mfd/syscon.yaml
 
 Required properties:
 - compatible: "hisilicon,hi3519-sysctrl".