clk: starfive: Add StarFive JH7110 PLL clock driver

Add driver for the StarFive JH7110 PLL clock controller
and they work by reading and setting syscon registers.

Co-developed-by: Emil Renner Berthing <[email protected]>
Signed-off-by: Emil Renner Berthing <[email protected]>
Signed-off-by: Xingyu Wu <[email protected]>
Signed-off-by: Conor Dooley <[email protected]>

Author: SFxingyuwu

MAINTAINERS

@@ -20271,6 +20271,12 @@ S:	Supported
 F:	Documentation/devicetree/bindings/mmc/starfive*
 F:	drivers/mmc/host/dw_mmc-starfive.c
 
+STARFIVE JH7110 PLL CLOCK DRIVER
+M:	Xingyu Wu <[email protected]>
+S:	Supported
+F:	Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml
+F:	drivers/clk/starfive/clk-starfive-jh7110-pll.c
+
 STARFIVE JH7110 SYSCON
 M:	William Qiu <[email protected]>
 M:	Xingyu Wu <[email protected]>

drivers/clk/starfive/Kconfig

@@ -21,6 +21,14 @@ config CLK_STARFIVE_JH7100_AUDIO
 	  Say Y or M here to support the audio clocks on the StarFive JH7100
 	  SoC.
 
+config CLK_STARFIVE_JH7110_PLL
+	bool "StarFive JH7110 PLL clock support"
+	depends on ARCH_STARFIVE || COMPILE_TEST
+	default ARCH_STARFIVE
+	help
+	  Say yes here to support the PLL clock controller on the
+	  StarFive JH7110 SoC.
+
 config CLK_STARFIVE_JH7110_SYS
 	bool "StarFive JH7110 system clock support"
 	depends on ARCH_STARFIVE || COMPILE_TEST

drivers/clk/starfive/Makefile

@@ -4,5 +4,6 @@ obj-$(CONFIG_CLK_STARFIVE_JH71X0)	+= clk-starfive-jh71x0.o
 obj-$(CONFIG_CLK_STARFIVE_JH7100)	+= clk-starfive-jh7100.o
 obj-$(CONFIG_CLK_STARFIVE_JH7100_AUDIO)	+= clk-starfive-jh7100-audio.o
 
+obj-$(CONFIG_CLK_STARFIVE_JH7110_PLL)	+= clk-starfive-jh7110-pll.o
 obj-$(CONFIG_CLK_STARFIVE_JH7110_SYS)	+= clk-starfive-jh7110-sys.o
 obj-$(CONFIG_CLK_STARFIVE_JH7110_AON)	+= clk-starfive-jh7110-aon.o