PCI: stm32: Add PCIe host support for STM32MP25

Add driver for the STM32MP25 SoC PCIe controller based on the DesignWare
PCIe core. Controller supports 2.5 and 5 GT/s data rates, MSI via GICv2m,
Single Virtual Channel, Single Function and WAKE# GPIO.

Signed-off-by: Christian Bruel <[email protected]>
[mani: reworded description]
Signed-off-by: Manivannan Sadhasivam <[email protected]>
[bhelgaas: squash error handling cleanup from Christophe JAILLET
<[email protected]>:
https://patch.msgid.link/e69ade3edcec4da2d5bfc66e0d03bbcb5a857021.1759169956.git.christophe.jaillet@wanadoo.fr]
Signed-off-by: Bjorn Helgaas <[email protected]>
Link: https://patch.msgid.link/[email protected]

Author: Christian Bruel

drivers/pci/controller/dwc/Kconfig

@@ -422,6 +422,18 @@ config PCIE_SPEAR13XX
 	help
 	  Say Y here if you want PCIe support on SPEAr13XX SoCs.
 
+config PCIE_STM32_HOST
+	tristate "STMicroelectronics STM32MP25 PCIe Controller (host mode)"
+	depends on ARCH_STM32 || COMPILE_TEST
+	depends on PCI_MSI
+	select PCIE_DW_HOST
+	help
+	  Enables Root Complex (RC) support for the DesignWare core based PCIe
+	  controller found in STM32MP25 SoC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called pcie-stm32.
+
 config PCI_DRA7XX
 	tristate
 

drivers/pci/controller/dwc/Makefile

@@ -31,6 +31,7 @@ obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
 obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
 obj-$(CONFIG_PCIE_VISCONTI_HOST) += pcie-visconti.o
 obj-$(CONFIG_PCIE_RCAR_GEN4) += pcie-rcar-gen4.o
+obj-$(CONFIG_PCIE_STM32_HOST) += pcie-stm32.o
 
 # The following drivers are for devices that use the generic ACPI
 # pci_root.c driver but don't support standard ECAM config access.

drivers/pci/controller/dwc/pcie-stm32.c

@@ -0,0 +1,358 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics STM32MP25 PCIe root complex driver.
+ *
+ * Copyright (C) 2025 STMicroelectronics
+ * Author: Christian Bruel <[email protected]>
+ */
+
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include "pcie-designware.h"
+#include "pcie-stm32.h"
+#include "../../pci.h"
+
+struct stm32_pcie {
+	struct dw_pcie pci;
+	struct regmap *regmap;
+	struct reset_control *rst;
+	struct phy *phy;
+	struct clk *clk;
+	struct gpio_desc *perst_gpio;
+	struct gpio_desc *wake_gpio;
+};
+
+static void stm32_pcie_deassert_perst(struct stm32_pcie *stm32_pcie)
+{
+	if (stm32_pcie->perst_gpio) {
+		msleep(PCIE_T_PVPERL_MS);
+		gpiod_set_value(stm32_pcie->perst_gpio, 0);
+	}
+
+	msleep(PCIE_RESET_CONFIG_WAIT_MS);
+}
+
+static void stm32_pcie_assert_perst(struct stm32_pcie *stm32_pcie)
+{
+	gpiod_set_value(stm32_pcie->perst_gpio, 1);
+}
+
+static int stm32_pcie_start_link(struct dw_pcie *pci)
+{
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+
+	return regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR,
+				  STM32MP25_PCIECR_LTSSM_EN,
+				  STM32MP25_PCIECR_LTSSM_EN);
+}
+
+static void stm32_pcie_stop_link(struct dw_pcie *pci)
+{
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+
+	regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR,
+			   STM32MP25_PCIECR_LTSSM_EN, 0);
+}
+
+static int stm32_pcie_suspend_noirq(struct device *dev)
+{
+	struct stm32_pcie *stm32_pcie = dev_get_drvdata(dev);
+	int ret;
+
+	ret = dw_pcie_suspend_noirq(&stm32_pcie->pci);
+	if (ret)
+		return ret;
+
+	stm32_pcie_assert_perst(stm32_pcie);
+
+	clk_disable_unprepare(stm32_pcie->clk);
+
+	if (!device_wakeup_path(dev))
+		phy_exit(stm32_pcie->phy);
+
+	return pinctrl_pm_select_sleep_state(dev);
+}
+
+static int stm32_pcie_resume_noirq(struct device *dev)
+{
+	struct stm32_pcie *stm32_pcie = dev_get_drvdata(dev);
+	int ret;
+
+	/*
+	 * The core clock is gated with CLKREQ# from the COMBOPHY REFCLK,
+	 * thus if no device is present, must deassert it with a GPIO from
+	 * pinctrl pinmux before accessing the DBI registers.
+	 */
+	ret = pinctrl_pm_select_init_state(dev);
+	if (ret) {
+		dev_err(dev, "Failed to activate pinctrl pm state: %d\n", ret);
+		return ret;
+	}
+
+	if (!device_wakeup_path(dev)) {
+		ret = phy_init(stm32_pcie->phy);
+		if (ret) {
+			pinctrl_pm_select_default_state(dev);
+			return ret;
+		}
+	}
+
+	ret = clk_prepare_enable(stm32_pcie->clk);
+	if (ret)
+		goto err_phy_exit;
+
+	stm32_pcie_deassert_perst(stm32_pcie);
+
+	ret = dw_pcie_resume_noirq(&stm32_pcie->pci);
+	if (ret)
+		goto err_disable_clk;
+
+	pinctrl_pm_select_default_state(dev);
+
+	return 0;
+
+err_disable_clk:
+	stm32_pcie_assert_perst(stm32_pcie);
+	clk_disable_unprepare(stm32_pcie->clk);
+
+err_phy_exit:
+	phy_exit(stm32_pcie->phy);
+	pinctrl_pm_select_default_state(dev);
+
+	return ret;
+}
+
+static const struct dev_pm_ops stm32_pcie_pm_ops = {
+	NOIRQ_SYSTEM_SLEEP_PM_OPS(stm32_pcie_suspend_noirq,
+				  stm32_pcie_resume_noirq)
+};
+
+static const struct dw_pcie_host_ops stm32_pcie_host_ops = {
+};
+
+static const struct dw_pcie_ops dw_pcie_ops = {
+	.start_link = stm32_pcie_start_link,
+	.stop_link = stm32_pcie_stop_link
+};
+
+static int stm32_add_pcie_port(struct stm32_pcie *stm32_pcie)
+{
+	struct device *dev = stm32_pcie->pci.dev;
+	unsigned int wake_irq;
+	int ret;
+
+	ret = phy_set_mode(stm32_pcie->phy, PHY_MODE_PCIE);
+	if (ret)
+		return ret;
+
+	ret = phy_init(stm32_pcie->phy);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR,
+				 STM32MP25_PCIECR_TYPE_MASK,
+				 STM32MP25_PCIECR_RC);
+	if (ret)
+		goto err_phy_exit;
+
+	stm32_pcie_deassert_perst(stm32_pcie);
+
+	if (stm32_pcie->wake_gpio) {
+		wake_irq = gpiod_to_irq(stm32_pcie->wake_gpio);
+		ret = dev_pm_set_dedicated_wake_irq(dev, wake_irq);
+		if (ret) {
+			dev_err(dev, "Failed to enable wakeup irq %d\n", ret);
+			goto err_assert_perst;
+		}
+		irq_set_irq_type(wake_irq, IRQ_TYPE_EDGE_FALLING);
+	}
+
+	return 0;
+
+err_assert_perst:
+	stm32_pcie_assert_perst(stm32_pcie);
+
+err_phy_exit:
+	phy_exit(stm32_pcie->phy);
+
+	return ret;
+}
+
+static void stm32_remove_pcie_port(struct stm32_pcie *stm32_pcie)
+{
+	dev_pm_clear_wake_irq(stm32_pcie->pci.dev);
+
+	stm32_pcie_assert_perst(stm32_pcie);
+
+	phy_exit(stm32_pcie->phy);
+}
+
+static int stm32_pcie_parse_port(struct stm32_pcie *stm32_pcie)
+{
+	struct device *dev = stm32_pcie->pci.dev;
+	struct device_node *root_port;
+
+	root_port = of_get_next_available_child(dev->of_node, NULL);
+
+	stm32_pcie->phy = devm_of_phy_get(dev, root_port, NULL);
+	if (IS_ERR(stm32_pcie->phy)) {
+		of_node_put(root_port);
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->phy),
+				     "Failed to get pcie-phy\n");
+	}
+
+	stm32_pcie->perst_gpio = devm_fwnode_gpiod_get(dev, of_fwnode_handle(root_port),
+						       "reset", GPIOD_OUT_HIGH, NULL);
+	if (IS_ERR(stm32_pcie->perst_gpio)) {
+		if (PTR_ERR(stm32_pcie->perst_gpio) != -ENOENT) {
+			of_node_put(root_port);
+			return dev_err_probe(dev, PTR_ERR(stm32_pcie->perst_gpio),
+					     "Failed to get reset GPIO\n");
+		}
+		stm32_pcie->perst_gpio = NULL;
+	}
+
+	stm32_pcie->wake_gpio = devm_fwnode_gpiod_get(dev, of_fwnode_handle(root_port),
+						      "wake", GPIOD_IN, NULL);
+
+	if (IS_ERR(stm32_pcie->wake_gpio)) {
+		if (PTR_ERR(stm32_pcie->wake_gpio) != -ENOENT) {
+			of_node_put(root_port);
+			return dev_err_probe(dev, PTR_ERR(stm32_pcie->wake_gpio),
+					     "Failed to get wake GPIO\n");
+		}
+		stm32_pcie->wake_gpio = NULL;
+	}
+
+	of_node_put(root_port);
+
+	return 0;
+}
+
+static int stm32_pcie_probe(struct platform_device *pdev)
+{
+	struct stm32_pcie *stm32_pcie;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	stm32_pcie = devm_kzalloc(dev, sizeof(*stm32_pcie), GFP_KERNEL);
+	if (!stm32_pcie)
+		return -ENOMEM;
+
+	stm32_pcie->pci.dev = dev;
+	stm32_pcie->pci.ops = &dw_pcie_ops;
+	stm32_pcie->pci.pp.ops = &stm32_pcie_host_ops;
+
+	stm32_pcie->regmap = syscon_regmap_lookup_by_compatible("st,stm32mp25-syscfg");
+	if (IS_ERR(stm32_pcie->regmap))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->regmap),
+				     "No syscfg specified\n");
+
+	stm32_pcie->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(stm32_pcie->clk))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->clk),
+				     "Failed to get PCIe clock source\n");
+
+	stm32_pcie->rst = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(stm32_pcie->rst))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->rst),
+				     "Failed to get PCIe reset\n");
+
+	ret = stm32_pcie_parse_port(stm32_pcie);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, stm32_pcie);
+
+	ret = stm32_add_pcie_port(stm32_pcie);
+	if (ret)
+		return ret;
+
+	reset_control_assert(stm32_pcie->rst);
+	reset_control_deassert(stm32_pcie->rst);
+
+	ret = clk_prepare_enable(stm32_pcie->clk);
+	if (ret) {
+		dev_err(dev, "Core clock enable failed %d\n", ret);
+		goto err_remove_port;
+	}
+
+	ret = pm_runtime_set_active(dev);
+	if (ret < 0) {
+		dev_err_probe(dev, ret, "Failed to activate runtime PM\n");
+		goto err_disable_clk;
+	}
+
+	pm_runtime_no_callbacks(dev);
+
+	ret = devm_pm_runtime_enable(dev);
+	if (ret < 0) {
+		dev_err_probe(dev, ret, "Failed to enable runtime PM\n");
+		goto err_disable_clk;
+	}
+
+	ret = dw_pcie_host_init(&stm32_pcie->pci.pp);
+	if (ret)
+		goto err_disable_clk;
+
+	if (stm32_pcie->wake_gpio)
+		device_init_wakeup(dev, true);
+
+	return 0;
+
+err_disable_clk:
+	clk_disable_unprepare(stm32_pcie->clk);
+
+err_remove_port:
+	stm32_remove_pcie_port(stm32_pcie);
+
+	return ret;
+}
+
+static void stm32_pcie_remove(struct platform_device *pdev)
+{
+	struct stm32_pcie *stm32_pcie = platform_get_drvdata(pdev);
+	struct dw_pcie_rp *pp = &stm32_pcie->pci.pp;
+
+	if (stm32_pcie->wake_gpio)
+		device_init_wakeup(&pdev->dev, false);
+
+	dw_pcie_host_deinit(pp);
+
+	clk_disable_unprepare(stm32_pcie->clk);
+
+	stm32_remove_pcie_port(stm32_pcie);
+
+	pm_runtime_put_noidle(&pdev->dev);
+}
+
+static const struct of_device_id stm32_pcie_of_match[] = {
+	{ .compatible = "st,stm32mp25-pcie-rc" },
+	{},
+};
+
+static struct platform_driver stm32_pcie_driver = {
+	.probe = stm32_pcie_probe,
+	.remove = stm32_pcie_remove,
+	.driver = {
+		.name = "stm32-pcie",
+		.of_match_table = stm32_pcie_of_match,
+		.pm = &stm32_pcie_pm_ops,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+};
+
+module_platform_driver(stm32_pcie_driver);
+
+MODULE_AUTHOR("Christian Bruel <[email protected]>");
+MODULE_DESCRIPTION("STM32MP25 PCIe Controller driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, stm32_pcie_of_match);