Rust-for-Linux
diff --git a/‎Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml
Lines changed: 319 additions & 0 deletions b/‎Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml
Lines changed: 319 additions & 0 deletions
@@ -0,0 +1,319 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/nvidia,tegra194-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 (and later) PCIe Endpoint controller (Synopsys DesignWare Core based)
+
+maintainers:
+  - Thierry Reding <[email protected]>
+  - Jon Hunter <[email protected]>
+  - Vidya Sagar <[email protected]>
+
+description: |
+  This PCIe controller is based on the Synopsys DesignWare PCIe IP and thus
+  inherits all the common properties defined in snps,dw-pcie-ep.yaml.  Some
+  of the controller instances are dual mode; they can work either in Root
+  Port mode or Endpoint mode but one at a time.
+
+  On Tegra194, controllers C0, C4 and C5 support Endpoint mode.
+  On Tegra234, controllers C5, C6, C7 and C10 support Endpoint mode.
+
+  Note: On Tegra194's P2972-0000 platform, only C5 controller can be enabled to
+  operate in the Endpoint mode because of the way the platform is designed.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra194-pcie-ep
+      - nvidia,tegra234-pcie-ep
+
+  reg:
+    items:
+      - description: controller's application logic registers
+      - description: iATU and DMA registers. This is where the iATU (internal
+          Address Translation Unit) registers of the PCIe core are made
+          available for software access.
+      - description: aperture where the Root Port's own configuration
+          registers are available.
+      - description: aperture used to map the remote Root Complex address space
+
+  reg-names:
+    items:
+      - const: appl
+      - const: atu_dma
+      - const: dbi
+      - const: addr_space
+
+  interrupts:
+    items:
+      - description: controller interrupt
+
+  interrupt-names:
+    items:
+      - const: intr
+
+  clocks:
+    items:
+      - description: module clock
+
+  clock-names:
+    items:
+      - const: core
+
+  resets:
+    items:
+      - description: APB bus interface reset
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: apb
+      - const: core
+
+  reset-gpios:
+    description: Must contain a phandle to a GPIO controller followed by GPIO
+      that is being used as PERST input signal. Please refer to pci.txt.
+
+  phys:
+    minItems: 1
+    maxItems: 8
+
+  phy-names:
+    minItems: 1
+    items:
+      - const: p2u-0
+      - const: p2u-1
+      - const: p2u-2
+      - const: p2u-3
+      - const: p2u-4
+      - const: p2u-5
+      - const: p2u-6
+      - const: p2u-7
+
+  power-domains:
+    maxItems: 1
+    description: |
+      A phandle to the node that controls power to the respective PCIe
+      controller and a specifier name for the PCIe controller.
+
+      Tegra194 specifiers are defined in "include/dt-bindings/power/tegra194-powergate.h"
+      Tegra234 specifiers are defined in "include/dt-bindings/power/tegra234-powergate.h"
+
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  dma-coherent: true
+
+  nvidia,bpmp:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      Must contain a pair of phandles to BPMP controller node followed by
+      controller ID. Following are the controller IDs for each controller:
+
+      Tegra194
+
+        0: C0
+        1: C1
+        2: C2
+        3: C3
+        4: C4
+        5: C5
+
+      Tegra234
+
+        0 : C0
+        1 : C1
+        2 : C2
+        3 : C3
+        4 : C4
+        5 : C5
+        6 : C6
+        7 : C7
+        8 : C8
+        9 : C9
+        10: C10
+
+    items:
+      - items:
+          - description: phandle to BPMP controller node
+          - description: PCIe controller ID
+            maximum: 10
+
+  nvidia,aspm-cmrt-us:
+    description: Common Mode Restore Time for proper operation of ASPM to be
+      specified in microseconds
+
+  nvidia,aspm-pwr-on-t-us:
+    description: Power On time for proper operation of ASPM to be specified in
+      microseconds
+
+  nvidia,aspm-l0s-entrance-latency-us:
+    description: ASPM L0s entrance latency to be specified in microseconds
+
+  vddio-pex-ctl-supply:
+    description: A phandle to the regulator supply for PCIe side band signals
+
+  nvidia,refclk-select-gpios:
+    maxItems: 1
+    description: GPIO used to enable REFCLK to controller from the host
+
+  nvidia,enable-ext-refclk:
+    description: |
+      This boolean property needs to be present if the controller is configured
+      to receive Reference Clock from the host.
+      NOTE: This is applicable only for Tegra234.
+
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  nvidia,enable-srns:
+    description: |
+      This boolean property needs to be present if the controller is
+      configured to operate in SRNS (Separate Reference Clocks with No
+      Spread-Spectrum Clocking).  NOTE: This is applicable only for
+      Tegra234.
+
+    $ref: /schemas/types.yaml#/definitions/flag
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
+
+unevaluatedProperties: false
+
+required:
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - reset-gpios
+  - vddio-pex-ctl-supply
+  - num-lanes
+  - phys
+  - phy-names
+  - nvidia,bpmp
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra194-clock.h>
+    #include <dt-bindings/gpio/tegra194-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra194-powergate.h>
+    #include <dt-bindings/reset/tegra194-reset.h>
+
+    bus@0 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+        pcie-ep@141a0000 {
+            compatible = "nvidia,tegra194-pcie-ep";
+            reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */
+                  <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+                  <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */
+                  <0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G) */
+            reg-names = "appl", "atu_dma", "dbi", "addr_space";
+            interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+            interrupt-names = "intr";
+
+            clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>;
+            clock-names = "core";
+
+            resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
+                     <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
+            reset-names = "apb", "core";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&clkreq_c5_bi_dir_state>;
+
+            nvidia,bpmp = <&bpmp 5>;
+
+            nvidia,aspm-cmrt-us = <60>;
+            nvidia,aspm-pwr-on-t-us = <20>;
+            nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+            vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+            reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
+
+            nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
+                                          GPIO_ACTIVE_HIGH>;
+
+            num-lanes = <8>;
+
+            phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+                   <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+                   <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+            phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+                        "p2u-5", "p2u-6", "p2u-7";
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra234-clock.h>
+    #include <dt-bindings/gpio/tegra234-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra234-powergate.h>
+    #include <dt-bindings/reset/tegra234-reset.h>
+
+    bus@0 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+        pcie-ep@141a0000 {
+            compatible = "nvidia,tegra234-pcie-ep";
+            power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>;
+            reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K)      */
+                  <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+                  <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+                  <0x27 0x40000000 0x4 0x00000000>; /* Address Space (16G)        */
+            reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+            interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+            interrupt-names = "intr";
+
+            clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>;
+            clock-names = "core";
+
+            resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>,
+                     <&bpmp TEGRA234_RESET_PEX1_CORE_5>;
+            reset-names = "apb", "core";
+
+            nvidia,bpmp = <&bpmp 5>;
+
+            nvidia,enable-ext-refclk;
+            nvidia,aspm-cmrt-us = <60>;
+            nvidia,aspm-pwr-on-t-us = <20>;
+            nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+            vddio-pex-ctl-supply = <&p3701_vdd_1v8_ls>;
+
+            reset-gpios = <&gpio TEGRA234_MAIN_GPIO(AF, 1) GPIO_ACTIVE_LOW>;
+
+            nvidia,refclk-select-gpios = <&gpio_aon
+                                          TEGRA234_AON_GPIO(AA, 4)
+                                          GPIO_ACTIVE_HIGH>;
+
+            num-lanes = <8>;
+
+            phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+                   <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+                   <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+            phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+                        "p2u-5", "p2u-6", "p2u-7";
+        };
+    };