arm64: dts: imx8mm-kontron: Fix polarity of reg_rst_eth2

The regulator reg_rst_eth2 should keep the reset signal of the USB ethernet
adapter deasserted anytime. Fix the polarity and mark it as always-on.

Anyway, using the regulator is only a workaround for the missing support of
specifying a reset GPIO for USB devices in a generic way. As we don't
have a solution for this at the moment, at least fix the current
workaround.

Fixes: 8668d8b ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards")
Cc: [email protected]
Signed-off-by: Frieder Schrempf <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>

Author: fschrempf

arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts

@@ -70,7 +70,9 @@
 		regulator-name = "rst-usb-eth2";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb_eth2>;
-		gpio = <&gpio3 2 GPIO_ACTIVE_LOW>;
+		gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
 	};
 
 	reg_vdd_5v: regulator-5v {