i2c: i801: Add lis3lv02d for Dell Precision 3540

On the Dell Precision 3540/0M14W7, BIOS 1.7.4 05/12/2020, Linux prints
the warning below.

    i801_smbus 0000:00:1f.4: Accelerometer lis3lv02d is present on SMBus but its address is unknown, skipping registration

With the help of Wolfram Sang, the test to probe it on I2C bus 6 at address
0x29 was successful.

    $ echo lis3lv02d 0x29 | sudo tee /sys/bus/i2c/devices/i2c-6/new_device
    [ 2110.787000] i2c i2c-6: new_device: Instantiated device lis3lv02d at 0x29
    [ 2110.791932] lis3lv02d_i2c 6-0029: supply Vdd not found, using dummy regulator
    [ 2110.791981] lis3lv02d_i2c 6-0029: supply Vdd_IO not found, using dummy regulator
    [ 2110.809233] lis3lv02d: 8 bits 3DC sensor found
    [ 2110.900668] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input23

So, the device has that accelerometer. Add the I2C address to the
mapping list.

Link: https://lore.kernel.org/linux-i2c/[email protected]/
Signed-off-by: Paul Menzel <[email protected]>
Acked-by: Pali Rohár <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
[wsa: shortened commit message a little]
Signed-off-by: Wolfram Sang <[email protected]>

Author: paulmenzel

drivers/i2c/busses/i2c-i801.c

@@ -1230,6 +1230,7 @@ static const struct {
 	 * Additional individual entries were added after verification.
 	 */
 	{ "Latitude 5480",      0x29 },
+	{ "Precision 3540",     0x29 },
 	{ "Vostro V131",        0x1d },
 	{ "Vostro 5568",        0x29 },
 };