Merge branches 'rgrp-glock-sharing' and 'gfs2-revoke' from https://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2.git

Merge the resource group glock sharing feature and the revoke accounting rework.

Signed-off-by: Andreas Gruenbacher <[email protected]>

Author: Andreas Gruenbacher

CREDITS

@@ -710,6 +710,10 @@ S: Las Cuevas 2385 - Bo Guemes
 S: Las Heras, Mendoza CP 5539
 S: Argentina
 
+N: Jay Cliburn
+E: [email protected]
+D: ATLX Ethernet drivers
+
 N: Steven P. Cole
 E: [email protected]
 E: [email protected]
@@ -1284,6 +1288,10 @@ D: Major kbuild rework during the 2.5 cycle
 D: ISDN Maintainer
 S: USA
 
+N: Gerrit Renker
+E: [email protected]
+D: DCCP protocol support.
+
 N: Philip Gladstone
 E: [email protected]
 D: Kernel / timekeeping stuff
@@ -2138,6 +2146,10 @@ E: [email protected]
 E: [email protected]
 D: Original author of software suspend
 
+N: Alexey Kuznetsov
+E: [email protected]
+D: Author and maintainer of large parts of the networking stack
+
 N: Jaroslav Kysela
 E: [email protected]
 W: https://www.perex.cz
@@ -2696,6 +2708,10 @@ N: Wolfgang Muees
 E: [email protected]
 D: Auerswald USB driver
 
+N: Shrijeet Mukherjee
+E: [email protected]
+D: Network routing domains (VRF).
+
 N: Paul Mundt
 E: [email protected]
 D: SuperH maintainer
@@ -4110,6 +4126,10 @@ S: B-1206 Jingmao Guojigongyu
 S: 16 Baliqiao Nanjie, Beijing 101100
 S: People's Repulic of China
 
+N: Aviad Yehezkel
+E: [email protected]
+D: Kernel TLS implementation and offload support.
+
 N: Victor Yodaiken
 E: [email protected]
 D: RTLinux (RealTime Linux)
@@ -4167,6 +4187,10 @@ S: 1507 145th Place SE #B5
 S: Bellevue, Washington 98007
 S: USA
 
+N: Wensong Zhang
+E: [email protected]
+D: IP virtual server (IPVS).
+
 N: Haojian Zhuang
 E: [email protected]
 D: MMP support

Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -264,7 +264,8 @@ Description:	Discover CPUs in the same CPU frequency coordination domain
 		attribute is useful for user space DVFS controllers to get better
 		power/performance results for platforms using acpi-cpufreq.
 
-		This file is only present if the acpi-cpufreq driver is in use.
+		This file is only present if the acpi-cpufreq or the cppc-cpufreq
+		drivers are in use.
 
 
 What:		/sys/devices/system/cpu/cpu*/cache/index3/cache_disable_{0,1}

Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst

@@ -473,7 +473,7 @@ read-side critical sections that follow the idle period (the oval near
 the bottom of the diagram above).
 
 Plumbing this into the full grace-period execution is described
-`below <#Forcing%20Quiescent%20States>`__.
+`below <Forcing Quiescent States_>`__.
 
 CPU-Hotplug Interface
 ^^^^^^^^^^^^^^^^^^^^^
@@ -494,7 +494,7 @@ mask to detect CPUs having gone offline since the beginning of this
 grace period.
 
 Plumbing this into the full grace-period execution is described
-`below <#Forcing%20Quiescent%20States>`__.
+`below <Forcing Quiescent States_>`__.
 
 Forcing Quiescent States
 ^^^^^^^^^^^^^^^^^^^^^^^^
@@ -532,7 +532,7 @@ from other CPUs.
 | RCU. But this diagram is complex enough as it is, so simplicity       |
 | overrode accuracy. You can think of it as poetic license, or you can  |
 | think of it as misdirection that is resolved in the                   |
-| `stitched-together diagram <#Putting%20It%20All%20Together>`__.       |
+| `stitched-together diagram <Putting It All Together_>`__.             |
 +-----------------------------------------------------------------------+
 
 Grace-Period Cleanup
@@ -596,7 +596,7 @@ maintain ordering. For example, if the callback function wakes up a task
 that runs on some other CPU, proper ordering must in place in both the
 callback function and the task being awakened. To see why this is
 important, consider the top half of the `grace-period
-cleanup <#Grace-Period%20Cleanup>`__ diagram. The callback might be
+cleanup`_ diagram. The callback might be
 running on a CPU corresponding to the leftmost leaf ``rcu_node``
 structure, and awaken a task that is to run on a CPU corresponding to
 the rightmost leaf ``rcu_node`` structure, and the grace-period kernel

Documentation/RCU/Design/Requirements/Requirements.rst

@@ -45,7 +45,7 @@ requirements:
 #. `Other RCU Flavors`_
 #. `Possible Future Changes`_
 
-This is followed by a `summary <#Summary>`__, however, the answers to
+This is followed by a summary_, however, the answers to
 each quick quiz immediately follows the quiz. Select the big white space
 with your mouse to see the answer.
 
@@ -1096,7 +1096,7 @@ memory barriers.
 | case, voluntary context switch) within an RCU read-side critical      |
 | section. However, sleeping locks may be used within userspace RCU     |
 | read-side critical sections, and also within Linux-kernel sleepable   |
-| RCU `(SRCU) <#Sleepable%20RCU>`__ read-side critical sections. In     |
+| RCU `(SRCU) <Sleepable RCU_>`__ read-side critical sections. In       |
 | addition, the -rt patchset turns spinlocks into a sleeping locks so   |
 | that the corresponding critical sections can be preempted, which also |
 | means that these sleeplockified spinlocks (but not other sleeping     |
@@ -1186,7 +1186,7 @@ non-preemptible (``CONFIG_PREEMPT=n``) kernels, and thus `tiny
 RCU <https://lkml.kernel.org/g/[email protected]>`__
 was born. Josh Triplett has since taken over the small-memory banner
 with his `Linux kernel tinification <https://tiny.wiki.kernel.org/>`__
-project, which resulted in `SRCU <#Sleepable%20RCU>`__ becoming optional
+project, which resulted in `SRCU <Sleepable RCU_>`__ becoming optional
 for those kernels not needing it.
 
 The remaining performance requirements are, for the most part,
@@ -1457,8 +1457,8 @@ will vary as the value of ``HZ`` varies, and can also be changed using
 the relevant Kconfig options and kernel boot parameters. RCU currently
 does not do much sanity checking of these parameters, so please use
 caution when changing them. Note that these forward-progress measures
-are provided only for RCU, not for `SRCU <#Sleepable%20RCU>`__ or `Tasks
-RCU <#Tasks%20RCU>`__.
+are provided only for RCU, not for `SRCU <Sleepable RCU_>`__ or `Tasks
+RCU`_.
 
 RCU takes the following steps in ``call_rcu()`` to encourage timely
 invocation of callbacks when any given non-\ ``rcu_nocbs`` CPU has
@@ -1477,8 +1477,8 @@ encouragement was provided:
 
 Again, these are default values when running at ``HZ=1000``, and can be
 overridden. Again, these forward-progress measures are provided only for
-RCU, not for `SRCU <#Sleepable%20RCU>`__ or `Tasks
-RCU <#Tasks%20RCU>`__. Even for RCU, callback-invocation forward
+RCU, not for `SRCU <Sleepable RCU_>`__ or `Tasks
+RCU`_. Even for RCU, callback-invocation forward
 progress for ``rcu_nocbs`` CPUs is much less well-developed, in part
 because workloads benefiting from ``rcu_nocbs`` CPUs tend to invoke
 ``call_rcu()`` relatively infrequently. If workloads emerge that need
@@ -1920,7 +1920,7 @@ Hotplug CPU
 
 The Linux kernel supports CPU hotplug, which means that CPUs can come
 and go. It is of course illegal to use any RCU API member from an
-offline CPU, with the exception of `SRCU <#Sleepable%20RCU>`__ read-side
+offline CPU, with the exception of `SRCU <Sleepable RCU_>`__ read-side
 critical sections. This requirement was present from day one in
 DYNIX/ptx, but on the other hand, the Linux kernel's CPU-hotplug
 implementation is “interesting.”
@@ -2177,7 +2177,7 @@ handles these states differently:
 However, RCU must be reliably informed as to whether any given CPU is
 currently in the idle loop, and, for ``NO_HZ_FULL``, also whether that
 CPU is executing in usermode, as discussed
-`earlier <#Energy%20Efficiency>`__. It also requires that the
+`earlier <Energy Efficiency_>`__. It also requires that the
 scheduling-clock interrupt be enabled when RCU needs it to be:
 
 #. If a CPU is either idle or executing in usermode, and RCU believes it
@@ -2294,7 +2294,7 @@ Performance, Scalability, Response Time, and Reliability
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 Expanding on the `earlier
-discussion <#Performance%20and%20Scalability>`__, RCU is used heavily by
+discussion <Performance and Scalability_>`__, RCU is used heavily by
 hot code paths in performance-critical portions of the Linux kernel's
 networking, security, virtualization, and scheduling code paths. RCU
 must therefore use efficient implementations, especially in its

Documentation/admin-guide/binfmt-misc.rst

@@ -23,7 +23,7 @@ Here is what the fields mean:
 
 - ``name``
    is an identifier string. A new /proc file will be created with this
-   ``name below /proc/sys/fs/binfmt_misc``; cannot contain slashes ``/`` for
+   name below ``/proc/sys/fs/binfmt_misc``; cannot contain slashes ``/`` for
    obvious reasons.
 - ``type``
    is the type of recognition. Give ``M`` for magic and ``E`` for extension.
@@ -83,7 +83,7 @@ Here is what the fields mean:
       ``F`` - fix binary
             The usual behaviour of binfmt_misc is to spawn the
 	    binary lazily when the misc format file is invoked.  However,
-	    this doesn``t work very well in the face of mount namespaces and
+	    this doesn't work very well in the face of mount namespaces and
 	    changeroots, so the ``F`` mode opens the binary as soon as the
 	    emulation is installed and uses the opened image to spawn the
 	    emulator, meaning it is always available once installed,

Documentation/admin-guide/bootconfig.rst

@@ -154,7 +154,7 @@ get the boot configuration data.
 Because of this "piggyback" method, there is no need to change or
 update the boot loader and the kernel image itself as long as the boot
 loader passes the correct initrd file size. If by any chance, the boot
-loader passes a longer size, the kernel feils to find the bootconfig data.
+loader passes a longer size, the kernel fails to find the bootconfig data.
 
 To do this operation, Linux kernel provides "bootconfig" command under
 tools/bootconfig, which allows admin to apply or delete the config file

Documentation/admin-guide/device-mapper/verity.rst

@@ -134,7 +134,12 @@ root_hash_sig_key_desc <key_description>
     the pkcs7 signature of the roothash. The pkcs7 signature is used to validate
     the root hash during the creation of the device mapper block device.
     Verification of roothash depends on the config DM_VERITY_VERIFY_ROOTHASH_SIG
-    being set in the kernel.
+    being set in the kernel.  The signatures are checked against the builtin
+    trusted keyring by default, or the secondary trusted keyring if
+    DM_VERITY_VERIFY_ROOTHASH_SIG_SECONDARY_KEYRING is set.  The secondary
+    trusted keyring includes by default the builtin trusted keyring, and it can
+    also gain new certificates at run time if they are signed by a certificate
+    already in the secondary trusted keyring.
 
 Theory of operation
 ===================

Documentation/admin-guide/kernel-parameters.rst

@@ -3,8 +3,8 @@
 The kernel's command-line parameters
 ====================================
 
-The following is a consolidated list of the kernel parameters as
-implemented by the __setup(), core_param() and module_param() macros
+The following is a consolidated list of the kernel parameters as implemented
+by the __setup(), early_param(), core_param() and module_param() macros
 and sorted into English Dictionary order (defined as ignoring all
 punctuation and sorting digits before letters in a case insensitive
 manner), and with descriptions where known.

Documentation/admin-guide/kernel-parameters.txt

@@ -1385,7 +1385,7 @@
 
 	ftrace_filter=[function-list]
 			[FTRACE] Limit the functions traced by the function
-			tracer at boot up. function-list is a comma separated
+			tracer at boot up. function-list is a comma-separated
 			list of functions. This list can be changed at run
 			time by the set_ftrace_filter file in the debugfs
 			tracing directory.
@@ -1399,13 +1399,13 @@
 	ftrace_graph_filter=[function-list]
 			[FTRACE] Limit the top level callers functions traced
 			by the function graph tracer at boot up.
-			function-list is a comma separated list of functions
+			function-list is a comma-separated list of functions
 			that can be changed at run time by the
 			set_graph_function file in the debugfs tracing directory.
 
 	ftrace_graph_notrace=[function-list]
 			[FTRACE] Do not trace from the functions specified in
-			function-list.  This list is a comma separated list of
+			function-list.  This list is a comma-separated list of
 			functions that can be changed at run time by the
 			set_graph_notrace file in the debugfs tracing directory.
 
@@ -2254,6 +2254,16 @@
 			for all guests.
 			Default is 1 (enabled) if in 64-bit or 32-bit PAE mode.
 
+	kvm-arm.mode=
+			[KVM,ARM] Select one of KVM/arm64's modes of operation.
+
+			protected: nVHE-based mode with support for guests whose
+				   state is kept private from the host.
+				   Not valid if the kernel is running in EL2.
+
+			Defaults to VHE/nVHE based on hardware support and
+			the value of CONFIG_ARM64_VHE.
+
 	kvm-arm.vgic_v3_group0_trap=
 			[KVM,ARM] Trap guest accesses to GICv3 group-0
 			system registers
@@ -2411,7 +2421,7 @@
 			when set.
 			Format: <int>
 
-	libata.force=	[LIBATA] Force configurations.  The format is comma
+	libata.force=	[LIBATA] Force configurations.  The format is comma-
 			separated list of "[ID:]VAL" where ID is
 			PORT[.DEVICE].  PORT and DEVICE are decimal numbers
 			matching port, link or device.  Basically, it matches
@@ -5135,7 +5145,7 @@
 
 	stacktrace_filter=[function-list]
 			[FTRACE] Limit the functions that the stack tracer
-			will trace at boot up. function-list is a comma separated
+			will trace at boot up. function-list is a comma-separated
 			list of functions. This list can be changed at run
 			time by the stack_trace_filter file in the debugfs
 			tracing directory. Note, this enables stack tracing
@@ -5338,7 +5348,7 @@
 	trace_event=[event-list]
 			[FTRACE] Set and start specified trace events in order
 			to facilitate early boot debugging. The event-list is a
-			comma separated list of trace events to enable. See
+			comma-separated list of trace events to enable. See
 			also Documentation/trace/events.rst
 
 	trace_options=[option-list]
@@ -5962,6 +5972,10 @@
 			This option is obsoleted by the "nopv" option, which
 			has equivalent effect for XEN platform.
 
+	xen_no_vector_callback
+			[KNL,X86,XEN] Disable the vector callback for Xen
+			event channel interrupts.
+
 	xen_scrub_pages=	[XEN]
 			Boolean option to control scrubbing pages before giving them back
 			to Xen, for use by other domains. Can be also changed at runtime

Documentation/admin-guide/mm/concepts.rst

@@ -184,7 +184,7 @@ pages either asynchronously or synchronously, depending on the state
 of the system. When the system is not loaded, most of the memory is free
 and allocation requests will be satisfied immediately from the free
 pages supply. As the load increases, the amount of the free pages goes
-down and when it reaches a certain threshold (high watermark), an
+down and when it reaches a certain threshold (low watermark), an
 allocation request will awaken the ``kswapd`` daemon. It will
 asynchronously scan memory pages and either just free them if the data
 they contain is available elsewhere, or evict to the backing storage