Merge branch 'pci/controller/rcar-gen4'

- Fix a typo that prevented correct PHY initialization (Marek Vasut)

- Add a missing 1ms delay after PWR reset assertion as required by the V4H
  manual (Marek Vasut)

- Assure reset has completed before DBI access to avoid SError (Marek
  Vasut)

- Fix inverted PHY initialization check, which sometimes led to timeouts
  and failure to start the controller (Marek Vasut)

* pci/controller/rcar-gen4:
  PCI: rcar-gen4: Fix inverted break condition in PHY initialization
  PCI: rcar-gen4: Assure reset occurs before DBI access
  PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion
  PCI: rcar-gen4: Fix PHY initialization

Author: bjorn-helgaas

drivers/pci/controller/dwc/pcie-rcar-gen4.c

@@ -182,8 +182,17 @@ static int rcar_gen4_pcie_common_init(struct rcar_gen4_pcie *rcar)
 		return ret;
 	}
 
-	if (!reset_control_status(dw->core_rsts[DW_PCIE_PWR_RST].rstc))
+	if (!reset_control_status(dw->core_rsts[DW_PCIE_PWR_RST].rstc)) {
 		reset_control_assert(dw->core_rsts[DW_PCIE_PWR_RST].rstc);
+		/*
+		 * R-Car V4H Reference Manual R19UH0186EJ0130 Rev.1.30 Apr.
+		 * 21, 2025 page 585 Figure 9.3.2 Software Reset flow (B)
+		 * indicates that for peripherals in HSC domain, after
+		 * reset has been asserted by writing a matching reset bit
+		 * into register SRCR, it is mandatory to wait 1ms.
+		 */
+		fsleep(1000);
+	}
 
 	val = readl(rcar->base + PCIEMSR0);
 	if (rcar->drvdata->mode == DW_PCIE_RC_TYPE) {
@@ -204,6 +213,19 @@ static int rcar_gen4_pcie_common_init(struct rcar_gen4_pcie *rcar)
 	if (ret)
 		goto err_unprepare;
 
+	/*
+	 * Assure the reset is latched and the core is ready for DBI access.
+	 * On R-Car V4H, the PCIe reset is asynchronous and does not take
+	 * effect immediately, but needs a short time to complete. In case
+	 * DBI access happens in that short time, that access generates an
+	 * SError. To make sure that condition can never happen, read back the
+	 * state of the reset, which should turn the asynchronous reset into
+	 * synchronous one, and wait a little over 1ms to add additional
+	 * safety margin.
+	 */
+	reset_control_status(dw->core_rsts[DW_PCIE_PWR_RST].rstc);
+	fsleep(1000);
+
 	if (rcar->drvdata->additional_common_init)
 		rcar->drvdata->additional_common_init(rcar);
 
@@ -699,7 +721,7 @@ static int rcar_gen4_pcie_ltssm_control(struct rcar_gen4_pcie *rcar, bool enable
 	rcar_gen4_pcie_phy_reg_update_bits(rcar, 0x148, GENMASK(23, 22), BIT(22));
 	rcar_gen4_pcie_phy_reg_update_bits(rcar, 0x148, GENMASK(18, 16), GENMASK(17, 16));
 	rcar_gen4_pcie_phy_reg_update_bits(rcar, 0x148, GENMASK(7, 6), BIT(6));
-	rcar_gen4_pcie_phy_reg_update_bits(rcar, 0x148, GENMASK(2, 0), GENMASK(11, 0));
+	rcar_gen4_pcie_phy_reg_update_bits(rcar, 0x148, GENMASK(2, 0), GENMASK(1, 0));
 	rcar_gen4_pcie_phy_reg_update_bits(rcar, 0x1d4, GENMASK(16, 15), GENMASK(16, 15));
 	rcar_gen4_pcie_phy_reg_update_bits(rcar, 0x514, BIT(26), BIT(26));
 	rcar_gen4_pcie_phy_reg_update_bits(rcar, 0x0f8, BIT(16), 0);
@@ -709,7 +731,7 @@ static int rcar_gen4_pcie_ltssm_control(struct rcar_gen4_pcie *rcar, bool enable
 	val &= ~APP_HOLD_PHY_RST;
 	writel(val, rcar->base + PCIERSTCTRL1);
 
-	ret = readl_poll_timeout(rcar->phy_base + 0x0f8, val, !(val & BIT(18)), 100, 10000);
+	ret = readl_poll_timeout(rcar->phy_base + 0x0f8, val, val & BIT(18), 100, 10000);
 	if (ret < 0)
 		return ret;