Merge tag 'usb-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

torvalds · torvalds · commit 88f66f13ea51 · 2023-07-30T11:57:51.000-07:00
Pull USB fixes from Greg KH:
 "Here are a set of USB driver fixes for 6.5-rc4. Include in here are:

   - new USB serial device ids

   - dwc3 driver fixes for reported issues

   - typec driver fixes for reported problems

   - gadget driver fixes

   - reverts of some problematic USB changes that went into -rc1

  All of these have been in linux-next with no reported problems"

* tag 'usb-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
  usb: misc: ehset: fix wrong if condition
  usb: dwc3: pci: skip BYT GPIO lookup table for hardwired phy
  usb: cdns3: fix incorrect calculation of ep_buf_size when more than one config
  usb: gadget: call usb_gadget_check_config() to verify UDC capability
  usb: typec: Use sysfs_emit_at when concatenating the string
  usb: typec: Iterate pds array when showing the pd list
  usb: typec: Set port-&gt;pd before adding device for typec_port
  usb: typec: qcom: fix return value check in qcom_pmic_typec_probe()
  Revert "usb: gadget: tegra-xudc: Fix error check in tegra_xudc_powerdomain_init()"
  Revert "usb: xhci: tegra: Fix error check"
  USB: gadget: Fix the memory leak in raw_gadget driver
  usb: gadget: core: remove unbalanced mutex_unlock in usb_gadget_activate
  Revert "usb: dwc3: core: Enable AutoRetry feature in the controller"
  Revert "xhci: add quirk for host controllers that don't update endpoint DCS"
  USB: quirks: add quirk for Focusrite Scarlett
  usb: xhci-mtk: set the dma max_seg_size
  MAINTAINERS: drop invalid usb/cdns3 Reviewer e-mail
  usb: dwc3: don't reset device side if dwc3 was configured as host-only
  usb: typec: ucsi: move typec_set_mode(TYPEC_STATE_SAFE) to ucsi_unregister_partner()
  usb: ohci-at91: Fix the unhandle interrupt when resume
  ...
diff --git a/MAINTAINERS b/MAINTAINERS
@@ -4463,7 +4463,6 @@ CADENCE USB3 DRD IP DRIVER
 M:	Peter Chen <peter.chen@kernel.org>
 M:	Pawel Laszczak <pawell@cadence.com>
 R:	Roger Quadros <rogerq@kernel.org>
-R:	Aswath Govindraju <a-govindraju@ti.com>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git
diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c
@@ -3015,12 +3015,14 @@ static int cdns3_gadget_udc_stop(struct usb_gadget *gadget)
 static int cdns3_gadget_check_config(struct usb_gadget *gadget)
 {
 	struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
+	struct cdns3_endpoint *priv_ep;
 	struct usb_ep *ep;
 	int n_in = 0;
 	int total;
 
 	list_for_each_entry(ep, &gadget->ep_list, ep_list) {
-		if (ep->claimed && (ep->address & USB_DIR_IN))
+		priv_ep = ep_to_cdns3_ep(ep);
+		if ((priv_ep->flags & EP_CLAIMED) && (ep->address & USB_DIR_IN))
 			n_in++;
 	}
 
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
@@ -436,6 +436,10 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* novation SoundControl XL */
 	{ USB_DEVICE(0x1235, 0x0061), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Focusrite Scarlett Solo USB */
+	{ USB_DEVICE(0x1235, 0x8211), .driver_info =
+			USB_QUIRK_DISCONNECT_SUSPEND },
+
 	/* Huawei 4G LTE module */
 	{ USB_DEVICE(0x12d1, 0x15bb), .driver_info =
 			USB_QUIRK_DISCONNECT_SUSPEND },
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
@@ -277,9 +277,9 @@ int dwc3_core_soft_reset(struct dwc3 *dwc)
 	/*
 	 * We're resetting only the device side because, if we're in host mode,
 	 * XHCI driver will reset the host block. If dwc3 was configured for
-	 * host-only mode, then we can return early.
+	 * host-only mode or current role is host, then we can return early.
 	 */
-	if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST)
+	if (dwc->dr_mode == USB_DR_MODE_HOST || dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST)
 		return 0;
 
 	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
@@ -1209,22 +1209,6 @@ static int dwc3_core_init(struct dwc3 *dwc)
 		dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
 	}
 
-	if (dwc->dr_mode == USB_DR_MODE_HOST ||
-	    dwc->dr_mode == USB_DR_MODE_OTG) {
-		reg = dwc3_readl(dwc->regs, DWC3_GUCTL);
-
-		/*
-		 * Enable Auto retry Feature to make the controller operating in
-		 * Host mode on seeing transaction errors(CRC errors or internal
-		 * overrun scenerios) on IN transfers to reply to the device
-		 * with a non-terminating retry ACK (i.e, an ACK transcation
-		 * packet with Retry=1 & Nump != 0)
-		 */
-		reg |= DWC3_GUCTL_HSTINAUTORETRY;
-
-		dwc3_writel(dwc->regs, DWC3_GUCTL, reg);
-	}
-
 	/*
 	 * Must config both number of packets and max burst settings to enable
 	 * RX and/or TX threshold.
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
@@ -256,9 +256,6 @@
 #define DWC3_GCTL_GBLHIBERNATIONEN	BIT(1)
 #define DWC3_GCTL_DSBLCLKGTNG		BIT(0)
 
-/* Global User Control Register */
-#define DWC3_GUCTL_HSTINAUTORETRY	BIT(14)
-
 /* Global User Control 1 Register */
 #define DWC3_GUCTL1_DEV_DECOUPLE_L1L2_EVT	BIT(31)
 #define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS	BIT(28)
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
@@ -233,10 +233,12 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc,
 
 			/*
 			 * A lot of BYT devices lack ACPI resource entries for
-			 * the GPIOs, add a fallback mapping to the reference
+			 * the GPIOs. If the ACPI entry for the GPIO controller
+			 * is present add a fallback mapping to the reference
 			 * design GPIOs which all boards seem to use.
 			 */
-			gpiod_add_lookup_table(&platform_bytcr_gpios);
+			if (acpi_dev_present("INT33FC", NULL, -1))
+				gpiod_add_lookup_table(&platform_bytcr_gpios);
 
 			/*
 			 * These GPIOs will turn on the USB2 PHY. Note that we have to
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
@@ -1125,6 +1125,10 @@ int usb_add_config(struct usb_composite_dev *cdev,
 		goto done;
 
 	status = bind(config);
+
+	if (status == 0)
+		status = usb_gadget_check_config(cdev->gadget);
+
 	if (status < 0) {
 		while (!list_empty(&config->functions)) {
 			struct usb_function		*f;
diff --git a/drivers/usb/gadget/legacy/raw_gadget.c b/drivers/usb/gadget/legacy/raw_gadget.c
@@ -310,13 +310,15 @@ static int gadget_bind(struct usb_gadget *gadget,
 	dev->eps_num = i;
 	spin_unlock_irqrestore(&dev->lock, flags);
 
-	/* Matches kref_put() in gadget_unbind(). */
-	kref_get(&dev->count);
-
 	ret = raw_queue_event(dev, USB_RAW_EVENT_CONNECT, 0, NULL);
-	if (ret < 0)
+	if (ret < 0) {
 		dev_err(&gadget->dev, "failed to queue event\n");
+		set_gadget_data(gadget, NULL);
+		return ret;
+	}
 
+	/* Matches kref_put() in gadget_unbind(). */
+	kref_get(&dev->count);
 	return ret;
 }
 
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
@@ -878,7 +878,6 @@ int usb_gadget_activate(struct usb_gadget *gadget)
 	 */
 	if (gadget->connected)
 		ret = usb_gadget_connect_locked(gadget);
-	mutex_unlock(&gadget->udc->connect_lock);
 
 unlock:
 	mutex_unlock(&gadget->udc->connect_lock);
diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c
@@ -3718,15 +3718,15 @@ static int tegra_xudc_powerdomain_init(struct tegra_xudc *xudc)
 	int err;
 
 	xudc->genpd_dev_device = dev_pm_domain_attach_by_name(dev, "dev");
-	if (IS_ERR_OR_NULL(xudc->genpd_dev_device)) {
-		err = PTR_ERR(xudc->genpd_dev_device) ? : -ENODATA;
+	if (IS_ERR(xudc->genpd_dev_device)) {
+		err = PTR_ERR(xudc->genpd_dev_device);
 		dev_err(dev, "failed to get device power domain: %d\n", err);
 		return err;
 	}
 
 	xudc->genpd_dev_ss = dev_pm_domain_attach_by_name(dev, "ss");
-	if (IS_ERR_OR_NULL(xudc->genpd_dev_ss)) {
-		err = PTR_ERR(xudc->genpd_dev_ss) ? : -ENODATA;
+	if (IS_ERR(xudc->genpd_dev_ss)) {
+		err = PTR_ERR(xudc->genpd_dev_ss);
 		dev_err(dev, "failed to get SuperSpeed power domain: %d\n", err);
 		return err;
 	}
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
@@ -672,7 +672,13 @@ ohci_hcd_at91_drv_resume(struct device *dev)
 	else
 		at91_start_clock(ohci_at91);
 
-	ohci_resume(hcd, false);
+	/*
+	 * According to the comment in ohci_hcd_at91_drv_suspend()
+	 * we need to do a reset if the 48Mhz clock was stopped,
+	 * that is, if ohci_at91->wakeup is clear. Tell ohci_resume()
+	 * to reset in this case by setting its "hibernated" flag.
+	 */
+	ohci_resume(hcd, !ohci_at91->wakeup);
 
 	return 0;
 }
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
@@ -586,6 +586,7 @@ static int xhci_mtk_probe(struct platform_device *pdev)
 	}
 
 	device_init_wakeup(dev, true);
+	dma_set_max_seg_size(dev, UINT_MAX);
 
 	xhci = hcd_to_xhci(hcd);
 	xhci->main_hcd = hcd;
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
@@ -479,10 +479,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 			pdev->device == 0x3432)
 		xhci->quirks |= XHCI_BROKEN_STREAMS;
 
-	if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) {
+	if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483)
 		xhci->quirks |= XHCI_LPM_SUPPORT;
-		xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS;
-	}
 
 	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
 		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI) {
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
@@ -626,11 +626,8 @@ static int xhci_move_dequeue_past_td(struct xhci_hcd *xhci,
 	struct xhci_ring *ep_ring;
 	struct xhci_command *cmd;
 	struct xhci_segment *new_seg;
-	struct xhci_segment *halted_seg = NULL;
 	union xhci_trb *new_deq;
 	int new_cycle;
-	union xhci_trb *halted_trb;
-	int index = 0;
 	dma_addr_t addr;
 	u64 hw_dequeue;
 	bool cycle_found = false;
@@ -668,27 +665,7 @@ static int xhci_move_dequeue_past_td(struct xhci_hcd *xhci,
 	hw_dequeue = xhci_get_hw_deq(xhci, dev, ep_index, stream_id);
 	new_seg = ep_ring->deq_seg;
 	new_deq = ep_ring->dequeue;
-
-	/*
-	 * Quirk: xHC write-back of the DCS field in the hardware dequeue
-	 * pointer is wrong - use the cycle state of the TRB pointed to by
-	 * the dequeue pointer.
-	 */
-	if (xhci->quirks & XHCI_EP_CTX_BROKEN_DCS &&
-	    !(ep->ep_state & EP_HAS_STREAMS))
-		halted_seg = trb_in_td(xhci, td->start_seg,
-				       td->first_trb, td->last_trb,
-				       hw_dequeue & ~0xf, false);
-	if (halted_seg) {
-		index = ((dma_addr_t)(hw_dequeue & ~0xf) - halted_seg->dma) /
-			 sizeof(*halted_trb);
-		halted_trb = &halted_seg->trbs[index];
-		new_cycle = halted_trb->generic.field[3] & 0x1;
-		xhci_dbg(xhci, "Endpoint DCS = %d TRB index = %d cycle = %d\n",
-			 (u8)(hw_dequeue & 0x1), index, new_cycle);
-	} else {
-		new_cycle = hw_dequeue & 0x1;
-	}
+	new_cycle = hw_dequeue & 0x1;
 
 	/*
 	 * We want to find the pointer, segment and cycle state of the new trb
diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
@@ -1145,15 +1145,15 @@ static int tegra_xusb_powerdomain_init(struct device *dev,
 	int err;
 
 	tegra->genpd_dev_host = dev_pm_domain_attach_by_name(dev, "xusb_host");
-	if (IS_ERR_OR_NULL(tegra->genpd_dev_host)) {
-		err = PTR_ERR(tegra->genpd_dev_host) ? : -ENODATA;
+	if (IS_ERR(tegra->genpd_dev_host)) {
+		err = PTR_ERR(tegra->genpd_dev_host);
 		dev_err(dev, "failed to get host pm-domain: %d\n", err);
 		return err;
 	}
 
 	tegra->genpd_dev_ss = dev_pm_domain_attach_by_name(dev, "xusb_ss");
-	if (IS_ERR_OR_NULL(tegra->genpd_dev_ss)) {
-		err = PTR_ERR(tegra->genpd_dev_ss) ? : -ENODATA;
+	if (IS_ERR(tegra->genpd_dev_ss)) {
+		err = PTR_ERR(tegra->genpd_dev_ss);
 		dev_err(dev, "failed to get superspeed pm-domain: %d\n", err);
 		return err;
 	}
diff --git a/drivers/usb/misc/ehset.c b/drivers/usb/misc/ehset.c
@@ -77,7 +77,7 @@ static int ehset_probe(struct usb_interface *intf,
 	switch (test_pid) {
 	case TEST_SE0_NAK_PID:
 		ret = ehset_prepare_port_for_testing(hub_udev, portnum);
-		if (!ret)
+		if (ret < 0)
 			break;
 		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
 					   USB_RT_PORT, USB_PORT_FEAT_TEST,
@@ -86,7 +86,7 @@ static int ehset_probe(struct usb_interface *intf,
 		break;
 	case TEST_J_PID:
 		ret = ehset_prepare_port_for_testing(hub_udev, portnum);
-		if (!ret)
+		if (ret < 0)
 			break;
 		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
 					   USB_RT_PORT, USB_PORT_FEAT_TEST,
@@ -95,7 +95,7 @@ static int ehset_probe(struct usb_interface *intf,
 		break;
 	case TEST_K_PID:
 		ret = ehset_prepare_port_for_testing(hub_udev, portnum);
-		if (!ret)
+		if (ret < 0)
 			break;
 		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
 					   USB_RT_PORT, USB_PORT_FEAT_TEST,
@@ -104,7 +104,7 @@ static int ehset_probe(struct usb_interface *intf,
 		break;
 	case TEST_PACKET_PID:
 		ret = ehset_prepare_port_for_testing(hub_udev, portnum);
-		if (!ret)
+		if (ret < 0)
 			break;
 		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
 					   USB_RT_PORT, USB_PORT_FEAT_TEST,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
@@ -251,6 +251,7 @@ static void option_instat_callback(struct urb *urb);
 #define QUECTEL_PRODUCT_EM061K_LTA		0x0123
 #define QUECTEL_PRODUCT_EM061K_LMS		0x0124
 #define QUECTEL_PRODUCT_EC25			0x0125
+#define QUECTEL_PRODUCT_EM060K_128		0x0128
 #define QUECTEL_PRODUCT_EG91			0x0191
 #define QUECTEL_PRODUCT_EG95			0x0195
 #define QUECTEL_PRODUCT_BG96			0x0296
@@ -268,6 +269,7 @@ static void option_instat_callback(struct urb *urb);
 #define QUECTEL_PRODUCT_RM520N			0x0801
 #define QUECTEL_PRODUCT_EC200U			0x0901
 #define QUECTEL_PRODUCT_EC200S_CN		0x6002
+#define QUECTEL_PRODUCT_EC200A			0x6005
 #define QUECTEL_PRODUCT_EM061K_LWW		0x6008
 #define QUECTEL_PRODUCT_EM061K_LCN		0x6009
 #define QUECTEL_PRODUCT_EC200T			0x6026
@@ -1197,6 +1199,9 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x30) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0xff, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x30) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0x00, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x40) },
@@ -1225,6 +1230,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0900, 0xff, 0, 0), /* RM500U-CN */
 	  .driver_info = ZLP },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200A, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200U, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) },
diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c
diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c
diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c

-Original file line number
+Diff line change
 M:	Peter Chen <[email protected]>
 M:	Pawel Laszczak <[email protected]>
 R:	Roger Quadros <[email protected]>
 -R:	Aswath Govindraju <[email protected]>
 L:	[email protected]
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git
Original file line number	Diff line number	Diff line change
`@@ -3015,12 +3015,14 @@ static int cdns3_gadget_udc_stop(struct usb_gadget *gadget)`
`3015`	`3015`	`static int cdns3_gadget_check_config(struct usb_gadget *gadget)`
`3016`	`3016`	`{`
`3017`	`3017`	`struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);`
	`3018`	`+ struct cdns3_endpoint *priv_ep;`
`3018`	`3019`	`struct usb_ep *ep;`
`3019`	`3020`	`int n_in = 0;`
`3020`	`3021`	`int total;`
`3021`	`3022`
`3022`	`3023`	`list_for_each_entry(ep, &gadget->ep_list, ep_list) {`
`3023`		`- if (ep->claimed && (ep->address & USB_DIR_IN))`
	`3024`	`+ priv_ep = ep_to_cdns3_ep(ep);`
	`3025`	`+ if ((priv_ep->flags & EP_CLAIMED) && (ep->address & USB_DIR_IN))`
`3024`	`3026`	`n_in++;`
`3025`	`3027`	`}`
`3026`	`3028`