Merge 6.11-rc7 into char-misc-next

We need the char-misc fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <[email protected]>

Author: gregkh

.mailmap

@@ -60,6 +60,7 @@ Amit Nischal <[email protected]> <[email protected]>
 Andi Kleen <[email protected]> <[email protected]>
 Andi Shyti <[email protected]> <[email protected]>
 Andreas Herrmann <[email protected]>
+Andreas Hindborg <[email protected]> <[email protected]>
 Andrej Shadura <[email protected]>
 Andrej Shadura <[email protected]> <[email protected]>
 Andrew Morton <[email protected]>
@@ -269,6 +270,7 @@ James Ketrenos <jketreno@io.(none)>
 Jan Glauber <[email protected]> <[email protected]>
 Jan Glauber <[email protected]> <[email protected]>
 Jan Glauber <[email protected]> <[email protected]>
+Jan Kuliga <[email protected]> <[email protected]>
 Jarkko Sakkinen <[email protected]> <[email protected]>
 Jarkko Sakkinen <[email protected]> <[email protected]>
 Jarkko Sakkinen <[email protected]> <[email protected]>
@@ -354,6 +356,8 @@ Kenneth Westfield <[email protected]> <[email protected]>
 Kiran Gunda <[email protected]> <[email protected]>
 Kirill Tkhai <[email protected]> <[email protected]>
 Kishon Vijay Abraham I <[email protected]> <[email protected]>
+Konrad Dybcio <[email protected]> <[email protected]>
+Konrad Dybcio <[email protected]> <[email protected]>
 Konstantin Khlebnikov <[email protected]> <[email protected]>
 Konstantin Khlebnikov <[email protected]> <[email protected]>
 Koushik <[email protected]>
@@ -614,6 +618,7 @@ Simon Kelley <[email protected]>
 Sricharan Ramabadhran <[email protected]> <[email protected]>
 Srinivas Ramana <[email protected]> <[email protected]>
 Sriram R <[email protected]> <[email protected]>
+Sriram Yagnaraman <[email protected]> <[email protected]>
 Stanislav Fomichev <[email protected]> <[email protected]>
 Stefan Wahren <[email protected]> <[email protected]>
 Stéphane Witzmann <[email protected]>

Documentation/ABI/testing/sysfs-timecard

@@ -258,24 +258,29 @@ Description:	(RW) When retrieving the PHC with the PTP SYS_OFFSET_EXTENDED
 		the estimated point where the FPGA latches the PHC time.  This
 		value may be changed by writing an unsigned integer.
 
-What:		/sys/class/timecard/ocpN/ttyGNSS
-What:		/sys/class/timecard/ocpN/ttyGNSS2
-Date:		September 2021
+What:		/sys/class/timecard/ocpN/tty
+Date:		August 2024
+Contact:	Vadim Fedorenko <[email protected]>
+Description:	(RO) Directory containing the sysfs nodes for TTY attributes
+
+What:		/sys/class/timecard/ocpN/tty/ttyGNSS
+What:		/sys/class/timecard/ocpN/tty/ttyGNSS2
+Date:		August 2024
 Contact:	Jonathan Lemon <[email protected]>
-Description:	These optional attributes link to the TTY serial ports
-		associated with the GNSS devices.
+Description:	(RO) These optional attributes contain names of the TTY serial
+		ports associated with the GNSS devices.
 
-What:		/sys/class/timecard/ocpN/ttyMAC
-Date:		September 2021
+What:		/sys/class/timecard/ocpN/tty/ttyMAC
+Date:		August 2024
 Contact:	Jonathan Lemon <[email protected]>
-Description:	This optional attribute links to the TTY serial port
-		associated with the Miniature Atomic Clock.
+Description:	(RO) This optional attribute contains name of the TTY serial
+		port associated with the Miniature Atomic Clock.
 
-What:		/sys/class/timecard/ocpN/ttyNMEA
-Date:		September 2021
+What:		/sys/class/timecard/ocpN/tty/ttyNMEA
+Date:		August 2024
 Contact:	Jonathan Lemon <[email protected]>
-Description:	This optional attribute links to the TTY serial port
-		which outputs the PHC time in NMEA ZDA format.
+Description:	(RO) This optional attribute contains name of the TTY serial
+		port which outputs the PHC time in NMEA ZDA format.
 
 What:		/sys/class/timecard/ocpN/utc_tai_offset
 Date:		September 2021

Documentation/admin-guide/cgroup-v2.rst

@@ -1717,9 +1717,10 @@ The following nested keys are defined.
 	entries fault back in or are written out to disk.
 
   memory.zswap.writeback
-	A read-write single value file. The default value is "1". The
-	initial value of the root cgroup is 1, and when a new cgroup is
-	created, it inherits the current value of its parent.
+	A read-write single value file. The default value is "1".
+	Note that this setting is hierarchical, i.e. the writeback would be
+	implicitly disabled for child cgroups if the upper hierarchy
+	does so.
 
 	When this is set to 0, all swapping attempts to swapping devices
 	are disabled. This included both zswap writebacks, and swapping due

Documentation/arch/riscv/vm-layout.rst

@@ -134,19 +134,3 @@ RISC-V Linux Kernel SV57
    ffffffff00000000 |  -4     GB | ffffffff7fffffff |    2 GB | modules, BPF
    ffffffff80000000 |  -2     GB | ffffffffffffffff |    2 GB | kernel
   __________________|____________|__________________|_________|____________________________________________________________
-
-
-Userspace VAs
---------------------
-To maintain compatibility with software that relies on the VA space with a
-maximum of 48 bits the kernel will, by default, return virtual addresses to
-userspace from a 48-bit range (sv48). This default behavior is achieved by
-passing 0 into the hint address parameter of mmap. On CPUs with an address space
-smaller than sv48, the CPU maximum supported address space will be the default.
-
-Software can "opt-in" to receiving VAs from another VA space by providing
-a hint address to mmap. When a hint address is passed to mmap, the returned
-address will never use more bits than the hint address. For example, if a hint
-address of `1 << 40` is passed to mmap, a valid returned address will never use
-bits 41 through 63. If no mappable addresses are available in that range, mmap
-will return `MAP_FAILED`.

Documentation/core-api/workqueue.rst

@@ -260,7 +260,7 @@ Some users depend on strict execution ordering where only one work item
 is in flight at any given time and the work items are processed in
 queueing order. While the combination of ``@max_active`` of 1 and
 ``WQ_UNBOUND`` used to achieve this behavior, this is no longer the
-case. Use ``alloc_ordered_queue()`` instead.
+case. Use alloc_ordered_workqueue() instead.
 
 
 Example Execution Scenarios

Documentation/devicetree/bindings/display/panel/wl-355608-a8.yaml renamed to Documentation/devicetree/bindings/display/panel/anbernic,rg35xx-plus-panel.yaml

@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/display/panel/wl-355608-a8.yaml#
+$id: http://devicetree.org/schemas/display/panel/anbernic,rg35xx-plus-panel.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: WL-355608-A8 3.5" (640x480 pixels) 24-bit IPS LCD panel
+title: Anbernic RG35XX series (WL-355608-A8) 3.5" 640x480 24-bit IPS LCD panel
 
 maintainers:
   - Ryan Walklin <[email protected]>
@@ -15,7 +15,14 @@ allOf:
 
 properties:
   compatible:
-    const: wl-355608-a8
+    oneOf:
+      - const: anbernic,rg35xx-plus-panel
+      - items:
+          - enum:
+              - anbernic,rg35xx-2024-panel
+              - anbernic,rg35xx-h-panel
+              - anbernic,rg35xx-sp-panel
+          - const: anbernic,rg35xx-plus-panel
 
   reg:
     maxItems: 1
@@ -40,7 +47,7 @@ examples:
         #size-cells = <0>;
 
         panel@0 {
-            compatible = "wl-355608-a8";
+            compatible = "anbernic,rg35xx-plus-panel";
             reg = <0>;
 
             spi-3wire;

Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml

@@ -42,6 +42,7 @@ properties:
       - focaltech,ft5426
       - focaltech,ft5452
       - focaltech,ft6236
+      - focaltech,ft8201
       - focaltech,ft8719
 
   reg:

Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.yaml

@@ -28,7 +28,7 @@ unevaluatedProperties: false
 
 examples:
   - |
-    nvmem {
+    soc-nvmem {
         compatible = "xlnx,zynqmp-nvmem-fw";
         nvmem-layout {
             compatible = "fixed-layout";

Documentation/devicetree/bindings/usb/microchip,usb2514.yaml

@@ -10,7 +10,7 @@ maintainers:
   - Fabio Estevam <[email protected]>
 
 allOf:
-  - $ref: usb-hcd.yaml#
+  - $ref: usb-device.yaml#
 
 properties:
   compatible:
@@ -36,6 +36,13 @@ required:
   - compatible
   - reg
 
+patternProperties:
+  "^.*@[0-9a-f]{1,2}$":
+    description: The hard wired USB devices
+    type: object
+    $ref: /schemas/usb/usb-device.yaml
+    additionalProperties: true
+
 unevaluatedProperties: false
 
 examples:

Documentation/filesystems/erofs.rst

@@ -75,7 +75,7 @@ Here are the main features of EROFS:
 
  - Support merging tail-end data into a special inode as fragments.
 
- - Support large folios for uncompressed files.
+ - Support large folios to make use of THPs (Transparent Hugepages);
 
  - Support direct I/O on uncompressed files to avoid double caching for loop
    devices;