dt-bindings: usb: Convert fsl-usb to yaml

Convert fsl-usb binding doc to yaml format.

Additional change:
- Remove port0 and port1 from required list.
- Use common usb-drd.yaml for dr_mode property
- Keep two difference examples.
- Add interrupts to required property list.
- Remove #address-cells and #size-cells in example.
- Use predefined irq type macro.

Signed-off-by: Frank Li <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

Author: nxpfrankli

Documentation/devicetree/bindings/usb/fsl,usb2.yaml

@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/fsl,usb2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale SOC USB controllers
+
+maintainers:
+  - Frank Li <[email protected]>
+
+description: |
+  The device node for a USB controller that is part of a Freescale
+  SOC is as described in the document "Open Firmware Recommended
+  Practice: Universal Serial Bus" with the following modifications
+  and additions.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl-usb2-mph
+          - fsl-usb2-dr
+      - items:
+          - enum:
+              - fsl-usb2-dr-v2.2
+              - fsl-usb2-dr-v2.5
+          - const: fsl-usb2-dr
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  phy_type:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ulpi, serial, utmi, utmi_wide]
+
+  port0:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates port0 is connected for fsl-usb2-mph compatible controllers.
+
+  port1:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates port1 is connected for "fsl-usb2-mph" compatible controllers.
+
+  fsl,invert-drvvbus:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      for MPC5121 USB0 only. Indicates the
+      port power polarity of internal PHY signal DRVVBUS is inverted.
+
+  fsl,invert-pwr-fault:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      for MPC5121 USB0 only. Indicates
+      the PWR_FAULT signal polarity is inverted.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - phy_type
+
+allOf:
+  - $ref: usb-drd.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    usb@22000 {
+        compatible = "fsl-usb2-mph";
+        reg = <22000 1000>;
+        interrupts = <27 IRQ_TYPE_EDGE_RISING>;
+        phy_type = "ulpi";
+        port0;
+        port1;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    usb@23000 {
+        compatible = "fsl-usb2-dr";
+        reg = <23000 1000>;
+        interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+        dr_mode = "otg";
+        phy_type = "ulpi";
+    };