ARM: dts: kirkwood: Add missing phy-mode and fixed links

The DSA framework has got more picky about always having a phy-mode
for the CPU port. The Kirkwood Ethernet is an RGMII port. Set the
switch to impose the RGMII delays.

Additionally, the cpu label has never actually been used in the
binding, so remove it.

Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: Gregory CLEMENT <[email protected]>

Author: lunn

arch/arm/boot/dts/kirkwood-dir665.dts

@@ -232,7 +232,7 @@
 
 			port@6 {
 				reg = <6>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;
@@ -251,6 +251,7 @@
 	ethernet0-port@0 {
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 

arch/arm/boot/dts/kirkwood-l-50.dts

@@ -254,7 +254,6 @@
 
 			port@6 {
 				reg = <6>;
-				label = "cpu";
 				phy-mode = "rgmii-id";
 				ethernet = <&eth1port>;
 				fixed-link {
@@ -330,6 +329,7 @@
 	ethernet1-port@0 {
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 

arch/arm/boot/dts/kirkwood-linksys-viper.dts

@@ -198,7 +198,7 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;
@@ -221,6 +221,7 @@
 	ethernet0-port@0 {
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 

arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts

@@ -149,7 +149,7 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;
@@ -166,6 +166,7 @@
 	ethernet0-port@0 {
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 

arch/arm/boot/dts/kirkwood-rd88f6281.dtsi

@@ -105,7 +105,7 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;