Skip to content

Commit 8debd85

Browse files
Dzmitry Sankouskigroeck
Dzmitry Sankouski
authored and
groeck
committed
hwmon: (max77705) Add initial support
Maxim MAX77705 is a Companion Power Management and Type-C interface IC. It includes charger and fuel gauge blocks, and is capable of measuring charger input current, system bus volatage and current, and bypass voltage. Add support for mentioned measurements. Signed-off-by: Dzmitry Sankouski <[email protected]> Link: https://lore.kernel.org/r/20250423-initial-support-for-max77705-sensors-v6-1-ff379e1b06c5@gmail.com Signed-off-by: Guenter Roeck <[email protected]>
1 parent 3e749ce commit 8debd85

File tree

6 files changed

+278
-0
lines changed

6 files changed

+278
-0
lines changed

‎Documentation/hwmon/index.rst

Lines changed: 1 addition & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -163,6 +163,7 @@ Hardware Monitoring Kernel Drivers
163163
max6639
164164
max6650
165165
max6697
166+
max77705
166167
max8688
167168
mc13783-adc
168169
mc34vr500

‎Documentation/hwmon/max77705.rst

Lines changed: 39 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,39 @@
1+
.. SPDX-License-Identifier: GPL-2.0
2+
3+
Kernel driver max77705
4+
======================
5+
6+
Supported chips:
7+
8+
* Maxim Integrated MAX77705
9+
10+
Prefix: 'max77705'
11+
12+
Addresses scanned: none
13+
14+
Datasheet: Not available
15+
16+
Authors:
17+
- Dzmitry Sankouski <[email protected]>
18+
19+
Description
20+
-----------
21+
22+
The MAX77705 PMIC provides current and voltage measurements besides fuelgauge:
23+
- chip input current
24+
- system bus current and voltage
25+
- VBYP voltage
26+
27+
Sysfs Attributes
28+
----------------
29+
30+
================= ========================================
31+
in1_label "vbyp"
32+
in1_input Measured chip vbyp voltage
33+
in2_label "vsys"
34+
in2_input Measured chip system bus voltage
35+
curr1_label "iin"
36+
curr1_input Measured chip input current.
37+
curr2_label "isys"
38+
curr2_input Measured chip system bus current.
39+
================= ========================================

‎MAINTAINERS

Lines changed: 7 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -18433,6 +18433,13 @@ S: Maintained
1843318433
F: Documentation/hwmon/pc87427.rst
1843418434
F: drivers/hwmon/pc87427.c
1843518435

18436+
MAX77705 HARDWARE MONITORING DRIVER
18437+
M: Dzmitry Sankouski <[email protected]>
18438+
L: [email protected]
18439+
S: Maintained
18440+
F: Documentation/hwmon/max77705.rst
18441+
F: drivers/hwmon/max77705-hwmon.c
18442+
1843618443
PCA9532 LED DRIVER
1843718444
M: Riku Voipio <[email protected]>
1843818445
S: Maintained

‎drivers/hwmon/Kconfig

Lines changed: 9 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -1318,6 +1318,15 @@ config SENSORS_MAX31790
13181318
This driver can also be built as a module. If so, the module
13191319
will be called max31790.
13201320

1321+
config SENSORS_MAX77705
1322+
tristate "MAX77705 current and voltage sensor"
1323+
depends on MFD_MAX77705
1324+
help
1325+
If you say yes here you get support for MAX77705 sensors connected with I2C.
1326+
1327+
This driver can also be built as a module. If so, the module
1328+
will be called max77705-hwmon.
1329+
13211330
config SENSORS_MC34VR500
13221331
tristate "NXP MC34VR500 hardware monitoring driver"
13231332
depends on I2C

‎drivers/hwmon/Makefile

Lines changed: 1 addition & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -162,6 +162,7 @@ obj-$(CONFIG_SENSORS_MAX6650) += max6650.o
162162
obj-$(CONFIG_SENSORS_MAX6697) += max6697.o
163163
obj-$(CONFIG_SENSORS_MAX31790) += max31790.o
164164
obj-$(CONFIG_MAX31827) += max31827.o
165+
obj-$(CONFIG_SENSORS_MAX77705) += max77705-hwmon.o
165166
obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o
166167
obj-$(CONFIG_SENSORS_MC34VR500) += mc34vr500.o
167168
obj-$(CONFIG_SENSORS_MCP3021) += mcp3021.o

‎drivers/hwmon/max77705-hwmon.c

Lines changed: 221 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,221 @@
1+
// SPDX-License-Identifier: GPL-2.0
2+
/*
3+
* MAX77705 voltage and current hwmon driver.
4+
*
5+
* Copyright (C) 2025 Dzmitry Sankouski <[email protected]>
6+
*/
7+
8+
#include <linux/err.h>
9+
#include <linux/hwmon-sysfs.h>
10+
#include <linux/hwmon.h>
11+
#include <linux/kernel.h>
12+
#include <linux/mfd/max77705-private.h>
13+
#include <linux/platform_device.h>
14+
#include <linux/regmap.h>
15+
16+
struct channel_desc {
17+
u8 reg;
18+
u8 avg_reg;
19+
const char *const label;
20+
// register resolution. nano Volts for voltage, nano Amperes for current
21+
u32 resolution;
22+
};
23+
24+
static const struct channel_desc current_channel_desc[] = {
25+
{
26+
.reg = IIN_REG,
27+
.label = "IIN_REG",
28+
.resolution = 125000
29+
},
30+
{
31+
.reg = ISYS_REG,
32+
.avg_reg = AVGISYS_REG,
33+
.label = "ISYS_REG",
34+
.resolution = 312500
35+
}
36+
};
37+
38+
static const struct channel_desc voltage_channel_desc[] = {
39+
{
40+
.reg = VBYP_REG,
41+
.label = "VBYP_REG",
42+
.resolution = 427246
43+
},
44+
{
45+
.reg = VSYS_REG,
46+
.label = "VSYS_REG",
47+
.resolution = 156250
48+
}
49+
};
50+
51+
static int max77705_read_and_convert(struct regmap *regmap, u8 reg, u32 res,
52+
bool is_signed, long *val)
53+
{
54+
int ret;
55+
u32 regval;
56+
57+
ret = regmap_read(regmap, reg, &regval);
58+
if (ret < 0)
59+
return ret;
60+
61+
if (is_signed)
62+
*val = mult_frac((long)sign_extend32(regval, 15), res, 1000000);
63+
else
64+
*val = mult_frac((long)regval, res, 1000000);
65+
66+
return 0;
67+
}
68+
69+
static umode_t max77705_is_visible(const void *data,
70+
enum hwmon_sensor_types type,
71+
u32 attr, int channel)
72+
{
73+
switch (type) {
74+
case hwmon_in:
75+
switch (attr) {
76+
case hwmon_in_input:
77+
case hwmon_in_label:
78+
return 0444;
79+
default:
80+
break;
81+
}
82+
break;
83+
case hwmon_curr:
84+
switch (attr) {
85+
case hwmon_curr_input:
86+
case hwmon_in_label:
87+
return 0444;
88+
case hwmon_curr_average:
89+
if (current_channel_desc[channel].avg_reg)
90+
return 0444;
91+
break;
92+
default:
93+
break;
94+
}
95+
break;
96+
default:
97+
break;
98+
}
99+
return 0;
100+
}
101+
102+
static int max77705_read_string(struct device *dev, enum hwmon_sensor_types type, u32 attr,
103+
int channel, const char **buf)
104+
{
105+
switch (type) {
106+
case hwmon_curr:
107+
switch (attr) {
108+
case hwmon_in_label:
109+
*buf = current_channel_desc[channel].label;
110+
return 0;
111+
default:
112+
return -EOPNOTSUPP;
113+
}
114+
115+
case hwmon_in:
116+
switch (attr) {
117+
case hwmon_in_label:
118+
*buf = voltage_channel_desc[channel].label;
119+
return 0;
120+
default:
121+
return -EOPNOTSUPP;
122+
}
123+
default:
124+
return -EOPNOTSUPP;
125+
}
126+
}
127+
128+
static int max77705_read(struct device *dev, enum hwmon_sensor_types type,
129+
u32 attr, int channel, long *val)
130+
{
131+
struct regmap *regmap = dev_get_drvdata(dev);
132+
u8 reg;
133+
u32 res;
134+
135+
switch (type) {
136+
case hwmon_curr:
137+
switch (attr) {
138+
case hwmon_curr_input:
139+
reg = current_channel_desc[channel].reg;
140+
res = current_channel_desc[channel].resolution;
141+
142+
return max77705_read_and_convert(regmap, reg, res, true, val);
143+
case hwmon_curr_average:
144+
reg = current_channel_desc[channel].avg_reg;
145+
res = current_channel_desc[channel].resolution;
146+
147+
return max77705_read_and_convert(regmap, reg, res, true, val);
148+
default:
149+
return -EOPNOTSUPP;
150+
}
151+
152+
case hwmon_in:
153+
switch (attr) {
154+
case hwmon_in_input:
155+
reg = voltage_channel_desc[channel].reg;
156+
res = voltage_channel_desc[channel].resolution;
157+
158+
return max77705_read_and_convert(regmap, reg, res, false, val);
159+
default:
160+
return -EOPNOTSUPP;
161+
}
162+
default:
163+
return -EOPNOTSUPP;
164+
}
165+
166+
return 0;
167+
}
168+
169+
static const struct hwmon_ops max77705_hwmon_ops = {
170+
.is_visible = max77705_is_visible,
171+
.read = max77705_read,
172+
.read_string = max77705_read_string,
173+
};
174+
175+
static const struct hwmon_channel_info *max77705_info[] = {
176+
HWMON_CHANNEL_INFO(in,
177+
HWMON_I_INPUT | HWMON_I_LABEL,
178+
HWMON_I_INPUT | HWMON_I_LABEL
179+
),
180+
HWMON_CHANNEL_INFO(curr,
181+
HWMON_C_INPUT | HWMON_C_LABEL,
182+
HWMON_C_INPUT | HWMON_C_AVERAGE | HWMON_C_LABEL
183+
),
184+
NULL
185+
};
186+
187+
static const struct hwmon_chip_info max77705_chip_info = {
188+
.ops = &max77705_hwmon_ops,
189+
.info = max77705_info,
190+
};
191+
192+
static int max77705_hwmon_probe(struct platform_device *pdev)
193+
{
194+
struct device *hwmon_dev;
195+
struct regmap *regmap;
196+
197+
regmap = dev_get_regmap(pdev->dev.parent, NULL);
198+
if (!regmap)
199+
return -ENODEV;
200+
201+
hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev, "max77705", regmap,
202+
&max77705_chip_info, NULL);
203+
if (IS_ERR(hwmon_dev))
204+
return dev_err_probe(&pdev->dev, PTR_ERR(hwmon_dev),
205+
"Unable to register hwmon device\n");
206+
207+
return 0;
208+
};
209+
210+
static struct platform_driver max77705_hwmon_driver = {
211+
.driver = {
212+
.name = "max77705-hwmon",
213+
},
214+
.probe = max77705_hwmon_probe,
215+
};
216+
217+
module_platform_driver(max77705_hwmon_driver);
218+
219+
MODULE_AUTHOR("Dzmitry Sankouski <[email protected]>");
220+
MODULE_DESCRIPTION("MAX77705 monitor driver");
221+
MODULE_LICENSE("GPL");

0 commit comments

Comments
 (0)