Merge tag 'staging-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/iio fixes from Greg KH:
 "Here are some small staging and IIO driver fixes for 5.7-rc7

  Nothing major, just a collection of IIO driver fixes for reported
  issues, and a few small staging driver fixes that people have found.
  Full details are in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: wfx: unlock on error path
  staging: greybus: Fix uninitialized scalar variable
  staging: kpc2000: fix error return code in kp2000_pcie_probe()
  iio: sca3000: Remove an erroneous 'get_device()'
  iio: adc: stm32-dfsdm: fix device used to request dma
  iio: adc: stm32-adc: fix device used to request dma
  iio: adc: ti-ads8344: Fix channel selection
  staging: iio: ad2s1210: Fix SPI reading
  iio: dac: vf610: Fix an error handling path in 'vf610_dac_probe()'
  iio: imu: st_lsm6dsx: unlock on error in st_lsm6dsx_shub_write_raw()
  iio: chemical: atlas-sensor: correct DO-SM channels

Author: torvalds

drivers/iio/accel/sca3000.c

@@ -980,7 +980,7 @@ static int sca3000_read_data(struct sca3000_state *st,
 	st->tx[0] = SCA3000_READ_REG(reg_address_high);
 	ret = spi_sync_transfer(st->us, xfer, ARRAY_SIZE(xfer));
 	if (ret) {
-		dev_err(get_device(&st->us->dev), "problem reading register");
+		dev_err(&st->us->dev, "problem reading register\n");
 		return ret;
 	}
 

drivers/iio/adc/stm32-adc.c

@@ -1812,18 +1812,18 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev)
 	return 0;
 }
 
-static int stm32_adc_dma_request(struct iio_dev *indio_dev)
+static int stm32_adc_dma_request(struct device *dev, struct iio_dev *indio_dev)
 {
 	struct stm32_adc *adc = iio_priv(indio_dev);
 	struct dma_slave_config config;
 	int ret;
 
-	adc->dma_chan = dma_request_chan(&indio_dev->dev, "rx");
+	adc->dma_chan = dma_request_chan(dev, "rx");
 	if (IS_ERR(adc->dma_chan)) {
 		ret = PTR_ERR(adc->dma_chan);
 		if (ret != -ENODEV) {
 			if (ret != -EPROBE_DEFER)
-				dev_err(&indio_dev->dev,
+				dev_err(dev,
 					"DMA channel request failed with %d\n",
 					ret);
 			return ret;
@@ -1930,7 +1930,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
 	if (ret < 0)
 		return ret;
 
-	ret = stm32_adc_dma_request(indio_dev);
+	ret = stm32_adc_dma_request(dev, indio_dev);
 	if (ret < 0)
 		return ret;
 

drivers/iio/adc/stm32-dfsdm-adc.c

@@ -62,7 +62,7 @@ enum sd_converter_type {
 
 struct stm32_dfsdm_dev_data {
 	int type;
-	int (*init)(struct iio_dev *indio_dev);
+	int (*init)(struct device *dev, struct iio_dev *indio_dev);
 	unsigned int num_channels;
 	const struct regmap_config *regmap_cfg;
 };
@@ -1365,11 +1365,12 @@ static void stm32_dfsdm_dma_release(struct iio_dev *indio_dev)
 	}
 }
 
-static int stm32_dfsdm_dma_request(struct iio_dev *indio_dev)
+static int stm32_dfsdm_dma_request(struct device *dev,
+				   struct iio_dev *indio_dev)
 {
 	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
 
-	adc->dma_chan = dma_request_chan(&indio_dev->dev, "rx");
+	adc->dma_chan = dma_request_chan(dev, "rx");
 	if (IS_ERR(adc->dma_chan)) {
 		int ret = PTR_ERR(adc->dma_chan);
 
@@ -1425,7 +1426,7 @@ static int stm32_dfsdm_adc_chan_init_one(struct iio_dev *indio_dev,
 					  &adc->dfsdm->ch_list[ch->channel]);
 }
 
-static int stm32_dfsdm_audio_init(struct iio_dev *indio_dev)
+static int stm32_dfsdm_audio_init(struct device *dev, struct iio_dev *indio_dev)
 {
 	struct iio_chan_spec *ch;
 	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
@@ -1452,10 +1453,10 @@ static int stm32_dfsdm_audio_init(struct iio_dev *indio_dev)
 	indio_dev->num_channels = 1;
 	indio_dev->channels = ch;
 
-	return stm32_dfsdm_dma_request(indio_dev);
+	return stm32_dfsdm_dma_request(dev, indio_dev);
 }
 
-static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev)
+static int stm32_dfsdm_adc_init(struct device *dev, struct iio_dev *indio_dev)
 {
 	struct iio_chan_spec *ch;
 	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
@@ -1499,17 +1500,17 @@ static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev)
 	init_completion(&adc->completion);
 
 	/* Optionally request DMA */
-	ret = stm32_dfsdm_dma_request(indio_dev);
+	ret = stm32_dfsdm_dma_request(dev, indio_dev);
 	if (ret) {
 		if (ret != -ENODEV) {
 			if (ret != -EPROBE_DEFER)
-				dev_err(&indio_dev->dev,
+				dev_err(dev,
 					"DMA channel request failed with %d\n",
 					ret);
 			return ret;
 		}
 
-		dev_dbg(&indio_dev->dev, "No DMA support\n");
+		dev_dbg(dev, "No DMA support\n");
 		return 0;
 	}
 
@@ -1622,7 +1623,7 @@ static int stm32_dfsdm_adc_probe(struct platform_device *pdev)
 		adc->dfsdm->fl_list[adc->fl_id].sync_mode = val;
 
 	adc->dev_data = dev_data;
-	ret = dev_data->init(iio);
+	ret = dev_data->init(dev, iio);
 	if (ret < 0)
 		return ret;
 

drivers/iio/adc/ti-ads8344.c

@@ -32,16 +32,17 @@ struct ads8344 {
 	u8 rx_buf[3];
 };
 
-#define ADS8344_VOLTAGE_CHANNEL(chan, si)				\
+#define ADS8344_VOLTAGE_CHANNEL(chan, addr)				\
 	{								\
 		.type = IIO_VOLTAGE,					\
 		.indexed = 1,						\
 		.channel = chan,					\
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+		.address = addr,					\
 	}
 
-#define ADS8344_VOLTAGE_CHANNEL_DIFF(chan1, chan2, si)			\
+#define ADS8344_VOLTAGE_CHANNEL_DIFF(chan1, chan2, addr)		\
 	{								\
 		.type = IIO_VOLTAGE,					\
 		.indexed = 1,						\
@@ -50,6 +51,7 @@ struct ads8344 {
 		.differential = 1,					\
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+		.address = addr,					\
 	}
 
 static const struct iio_chan_spec ads8344_channels[] = {
@@ -105,7 +107,7 @@ static int ads8344_read_raw(struct iio_dev *iio,
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&adc->lock);
-		*value = ads8344_adc_conversion(adc, channel->scan_index,
+		*value = ads8344_adc_conversion(adc, channel->address,
 						channel->differential);
 		mutex_unlock(&adc->lock);
 		if (*value < 0)

drivers/iio/chemical/atlas-sensor.c

@@ -194,7 +194,19 @@ static const struct iio_chan_spec atlas_orp_channels[] = {
 };
 
 static const struct iio_chan_spec atlas_do_channels[] = {
-	ATLAS_CONCENTRATION_CHANNEL(0, ATLAS_REG_DO_DATA),
+	{
+		.type = IIO_CONCENTRATION,
+		.address = ATLAS_REG_DO_DATA,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 32,
+			.storagebits = 32,
+			.endianness = IIO_BE,
+		},
+	},
 	IIO_CHAN_SOFT_TIMESTAMP(1),
 	{
 		.type = IIO_TEMP,

drivers/iio/dac/vf610_dac.c

@@ -223,6 +223,7 @@ static int vf610_dac_probe(struct platform_device *pdev)
 	return 0;
 
 error_iio_device_register:
+	vf610_dac_exit(info);
 	clk_disable_unprepare(info->clk);
 
 	return ret;

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c

@@ -544,8 +544,10 @@ st_lsm6dsx_shub_write_raw(struct iio_dev *iio_dev,
 
 			ref_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
 			odr = st_lsm6dsx_check_odr(ref_sensor, val, &odr_val);
-			if (odr < 0)
-				return odr;
+			if (odr < 0) {
+				err = odr;
+				goto release;
+			}
 
 			sensor->ext_info.slv_odr = val;
 			sensor->odr = odr;
@@ -557,6 +559,7 @@ st_lsm6dsx_shub_write_raw(struct iio_dev *iio_dev,
 		break;
 	}
 
+release:
 	iio_device_release_direct_mode(iio_dev);
 
 	return err;

drivers/staging/greybus/uart.c

@@ -537,9 +537,9 @@ static void gb_tty_set_termios(struct tty_struct *tty,
 	}
 
 	if (C_CRTSCTS(tty) && C_BAUD(tty) != B0)
-		newline.flow_control |= GB_SERIAL_AUTO_RTSCTS_EN;
+		newline.flow_control = GB_SERIAL_AUTO_RTSCTS_EN;
 	else
-		newline.flow_control &= ~GB_SERIAL_AUTO_RTSCTS_EN;
+		newline.flow_control = 0;
 
 	if (memcmp(&gb_tty->line_coding, &newline, sizeof(newline))) {
 		memcpy(&gb_tty->line_coding, &newline, sizeof(newline));

drivers/staging/iio/resolver/ad2s1210.c

@@ -130,17 +130,24 @@ static int ad2s1210_config_write(struct ad2s1210_state *st, u8 data)
 static int ad2s1210_config_read(struct ad2s1210_state *st,
 				unsigned char address)
 {
-	struct spi_transfer xfer = {
-		.len = 2,
-		.rx_buf = st->rx,
-		.tx_buf = st->tx,
+	struct spi_transfer xfers[] = {
+		{
+			.len = 1,
+			.rx_buf = &st->rx[0],
+			.tx_buf = &st->tx[0],
+			.cs_change = 1,
+		}, {
+			.len = 1,
+			.rx_buf = &st->rx[1],
+			.tx_buf = &st->tx[1],
+		},
 	};
 	int ret = 0;
 
 	ad2s1210_set_mode(MOD_CONFIG, st);
 	st->tx[0] = address | AD2S1210_MSB_IS_HIGH;
 	st->tx[1] = AD2S1210_REG_FAULT;
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
+	ret = spi_sync_transfer(st->sdev, xfers, 2);
 	if (ret < 0)
 		return ret;
 

drivers/staging/kpc2000/kpc2000/core.c

@@ -298,7 +298,6 @@ static int kp2000_pcie_probe(struct pci_dev *pdev,
 {
 	int err = 0;
 	struct kp2000_device *pcard;
-	int rv;
 	unsigned long reg_bar_phys_addr;
 	unsigned long reg_bar_phys_len;
 	unsigned long dma_bar_phys_addr;
@@ -445,11 +444,11 @@ static int kp2000_pcie_probe(struct pci_dev *pdev,
 	if (err < 0)
 		goto err_release_dma;
 
-	rv = request_irq(pcard->pdev->irq, kp2000_irq_handler, IRQF_SHARED,
-			 pcard->name, pcard);
-	if (rv) {
+	err = request_irq(pcard->pdev->irq, kp2000_irq_handler, IRQF_SHARED,
+			  pcard->name, pcard);
+	if (err) {
 		dev_err(&pcard->pdev->dev,
-			"%s: failed to request_irq: %d\n", __func__, rv);
+			"%s: failed to request_irq: %d\n", __func__, err);
 		goto err_disable_msi;
 	}