Merge tag 'v5.8-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

RGA node for rk322x, wifi node for rk3229-xms6 and some cleanups.

* tag 'v5.8-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: add rga node for rk322x
  ARM: dts: remove disable-wp from rk3229-xms6 emmc
  ARM: dts: enable WLAN for Mecer Xtreme Mini S6
  ARM: dts: rockchip: remove identical #include from rk3288.dtsi
  ARM: dts: rockchip: rename and label gpio-led subnodes

Link: https://lore.kernel.org/r/3735080.6Cexqc3t0Y@phil
Signed-off-by: Arnd Bergmann <[email protected]>

Author: arndb

arch/arm/boot/dts/rk3036-kylin.dts

@@ -16,7 +16,7 @@
 	leds: gpio-leds {
 		compatible = "gpio-leds";
 
-		work {
+		work_led: led-0 {
 			gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
 			label = "kylin:red:led";
 			pinctrl-names = "default";

arch/arm/boot/dts/rk3066a-mk808.dts

@@ -22,7 +22,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		blue {
+		blue_led: led-0 {
 			label = "mk808:blue:power";
 			gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
 			default-state = "off";

arch/arm/boot/dts/rk3188-radxarock.dts

@@ -33,19 +33,19 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		green {
+		green_led: led-0 {
 			label = "rock:green:user1";
 			gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		blue {
+		blue_led: led-1 {
 			label = "rock:blue:user2";
 			gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		sleep {
+		sleep_led: led-2 {
 			label = "rock:red:power";
 			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
 			default-state = "off";

arch/arm/boot/dts/rk3229-xms6.dts

@@ -33,12 +33,18 @@
 	power-led {
 		compatible = "gpio-leds";
 
-		blue {
+		blue_led: led-0 {
 			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>,
+		              <&gpio2 29 GPIO_ACTIVE_LOW>;
+	};
+
 	vcc_host: vcc-host-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -131,7 +137,6 @@
 
 &emmc {
 	cap-mmc-highspeed;
-	disable-wp;
 	non-removable;
 	status = "okay";
 };
@@ -202,6 +207,16 @@
 	status = "okay";
 };
 
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	vqmmc-supply = <&vccio_1v8>;
+	status = "okay";
+};
+
 &sdmmc {
 	cap-mmc-highspeed;
 	disable-wp;

arch/arm/boot/dts/rk322x.dtsi

@@ -615,6 +615,16 @@
 		status = "disabled";
 	};
 
+	rga: rga@20060000 {
+		compatible = "rockchip,rk3228-rga", "rockchip,rk3288-rga";
+		reg = <0x20060000 0x1000>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA>;
+		clock-names = "aclk", "hclk", "sclk";
+		resets = <&cru SRST_RGA>, <&cru SRST_RGA_A>, <&cru SRST_RGA_H>;
+		reset-names = "core", "axi", "ahb";
+	};
+
 	iep_mmu: iommu@20070800 {
 		compatible = "rockchip,iommu";
 		reg = <0x20070800 0x100>;

arch/arm/boot/dts/rk3288-firefly-reload.dts

@@ -45,20 +45,20 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		power_led: led-0 {
 			gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>;
 			label = "firefly:blue:power";
 			pinctrl-names = "default";
-			pinctrl-0 = <&power_led>;
+			pinctrl-0 = <&power_led_pin>;
 			panic-indicator;
 		};
 
-		work {
+		work_led: led-1 {
 			gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
 			label = "firefly:blue:user";
 			linux,default-trigger = "rc-feedback";
 			pinctrl-names = "default";
-			pinctrl-0 = <&work_led>;
+			pinctrl-0 = <&work_led_pin>;
 		};
 	};
 
@@ -334,11 +334,11 @@
 	};
 
 	leds {
-		power_led: power-led {
+		power_led_pin: power-led-pin {
 			rockchip,pins = <8 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		work_led: work-led {
+		work_led_pin: work-led-pin {
 			rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};

arch/arm/boot/dts/rk3288-firefly.dtsi

@@ -62,20 +62,20 @@
 	leds {
 		compatible = "gpio-leds";
 
-		work {
+		work_led: led-0 {
 			gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
 			label = "firefly:blue:user";
 			linux,default-trigger = "rc-feedback";
 			pinctrl-names = "default";
-			pinctrl-0 = <&work_led>;
+			pinctrl-0 = <&work_led_pin>;
 		};
 
-		power {
+		power_led: led-1 {
 			gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>;
 			label = "firefly:green:power";
 			linux,default-trigger = "default-on";
 			pinctrl-names = "default";
-			pinctrl-0 = <&power_led>;
+			pinctrl-0 = <&power_led_pin>;
 		};
 	};
 
@@ -429,11 +429,11 @@
 	};
 
 	leds {
-		power_led: power-led {
+		power_led_pin: power-led-pin {
 			rockchip,pins = <8 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		work_led: work-led {
+		work_led_pin: work-led-pin {
 			rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};

arch/arm/boot/dts/rk3288-miqi.dts

@@ -30,7 +30,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		work {
+		work_led: led-0 {
 			gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
 			label = "miqi:green:user";
 			linux,default-trigger = "timer";

arch/arm/boot/dts/rk3288-phycore-som.dtsi

@@ -36,9 +36,9 @@
 	leds: user-leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&user_led>;
+		pinctrl-0 = <&user_led_pin>;
 
-		user {
+		user_led: led-0 {
 			label = "green_led";
 			gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -372,7 +372,7 @@
 	};
 
 	leds {
-		user_led: user-led {
+		user_led_pin: user-led-pin {
 			rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>;
 		};
 	};

arch/arm/boot/dts/rk3288-rock2-square.dts

@@ -41,13 +41,13 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		heartbeat {
+		heartbeat_led: led-0 {
 			gpios = <&gpio7 RK_PB7 GPIO_ACTIVE_LOW>;
 			label = "rock2:green:state1";
 			linux,default-trigger = "heartbeat";
 		};
 
-		mmc {
+		mmc_led: led-1 {
 			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>;
 			label = "rock2:blue:state2";
 			linux,default-trigger = "mmc0";