Merge tag 'rtc-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "This cycle, we have a new RTC driver, for the SpacemiT P1. The optee
  driver gets alarm support. We also get a fix for a race condition that
  was fairly rare unless while stress testing the alarms.

  Subsystem:
   - Fix race when setting alarm
   - Ensure alarm irq is enabled when UIE is enabled
   - remove unneeded 'fast_io' parameter in regmap_config

  New driver:
   - SpacemiT P1 RTC

  Drivers:
   - efi: Remove wakeup functionality
   - optee: add alarms support
   - s3c: Drop support for S3C2410
   - zynqmp: Restore alarm functionality after kexec transition"

* tag 'rtc-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (29 commits)
  rtc: interface: Ensure alarm irq is enabled when UIE is enabled
  rtc: tps6586x: Fix initial enable_irq/disable_irq balance
  rtc: cpcap: Fix initial enable_irq/disable_irq balance
  rtc: isl12022: Fix initial enable_irq/disable_irq balance
  rtc: interface: Fix long-standing race when setting alarm
  rtc: pcf2127: fix watchdog interrupt mask on pcf2131
  rtc: zynqmp: Restore alarm functionality after kexec transition
  rtc: amlogic-a4: Optimize global variables
  rtc: sd2405al: Add I2C address.
  rtc: Kconfig: move symbols to proper section
  rtc: optee: make optee_rtc_pm_ops static
  rtc: optee: Fix error code in optee_rtc_read_alarm()
  rtc: optee: fix error code in probe()
  dt-bindings: rtc: Convert apm,xgene-rtc to DT schema
  rtc: spacemit: support the SpacemiT P1 RTC
  rtc: optee: add alarm related rtc ops to optee rtc driver
  rtc: optee: remove unnecessary memory operations
  rtc: optee: fix memory leak on driver removal
  rtc: x1205: Fix Xicor X1205 vendor prefix
  dt-bindings: rtc: Fix Xicor X1205 vendor prefix
  ...

Author: torvalds

Documentation/devicetree/bindings/rtc/apm,xgene-rtc.yaml

@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/apm,xgene-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: APM X-Gene Real Time Clock
+
+maintainers:
+  - Khuong Dinh <[email protected]>
+
+properties:
+  compatible:
+    const: apm,xgene-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    rtc@10510000 {
+        compatible = "apm,xgene-rtc";
+        reg = <0x10510000 0x400>;
+        interrupts = <0x0 0x46 0x4>;
+        #clock-cells = <1>;
+        clocks = <&rtcclk 0>;
+    };

Documentation/devicetree/bindings/rtc/isil,isl12057.txt

@@ -62,16 +62,6 @@ allOf:
     then:
       properties:
         quartz-load-femtofarads: false
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - nxp,pcf85063
-    then:
-      properties:
-        quartz-load-femtofarads:
-          const: 7000
   - if:
       properties:
         compatible:

Documentation/devicetree/bindings/rtc/nxp,pcf85063.yaml

@@ -13,9 +13,6 @@ properties:
   compatible:
     oneOf:
       - enum:
-          - samsung,s3c2410-rtc
-          - samsung,s3c2416-rtc
-          - samsung,s3c2443-rtc
           - samsung,s3c6410-rtc
       - items:
           - enum:
@@ -29,19 +26,12 @@ properties:
     maxItems: 1
 
   clocks:
-    description:
-      Must contain a list of phandle and clock specifier for the rtc
-      clock and in the case of a s3c6410 compatible controller, also
-      a source clock.
-    minItems: 1
     maxItems: 2
 
   clock-names:
-    description:
-      Must contain "rtc" and for a s3c6410 compatible controller
-      also "rtc_src".
-    minItems: 1
-    maxItems: 2
+    items:
+      - const: rtc
+      - const: rtc_src
 
   interrupts:
     description:
@@ -54,30 +44,6 @@ properties:
 
 allOf:
   - $ref: rtc.yaml#
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - samsung,s3c6410-rtc
-              - samsung,exynos3250-rtc
-    then:
-      properties:
-        clocks:
-          minItems: 2
-          maxItems: 2
-        clock-names:
-          items:
-            - const: rtc
-            - const: rtc_src
-    else:
-      properties:
-        clocks:
-          minItems: 1
-          maxItems: 1
-        clock-names:
-          items:
-            - const: rtc
 
 unevaluatedProperties: false
 

Documentation/devicetree/bindings/rtc/s3c-rtc.yaml

@@ -38,6 +38,8 @@ properties:
       - dallas,ds1672
       # Extremely Accurate I²C RTC with Integrated Crystal and SRAM
       - dallas,ds3232
+      # Dallas m41t00 Real-time Clock
+      - dallas,m41t00
       # SD2405AL Real-Time Clock
       - dfrobot,sd2405al
       # EM Microelectronic EM3027 RTC
@@ -83,8 +85,8 @@ properties:
       - via,vt8500-rtc
       # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
       - whwave,sd3078
-      # Xircom X1205 I2C RTC
-      - xircom,x1205
+      # Xicor/Intersil X1205 I2C RTC
+      - xicor,x1205
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/rtc/trivial-rtc.yaml

@@ -406,6 +406,16 @@ config RTC_DRV_MAX77686
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-max77686.
 
+config RTC_DRV_SPACEMIT_P1
+	tristate "SpacemiT P1 RTC"
+	depends on ARCH_SPACEMIT || COMPILE_TEST
+	select MFD_SPACEMIT_P1
+	default ARCH_SPACEMIT
+	help
+	  Enable support for the RTC function in the SpacemiT P1 PMIC.
+	  This driver can also be built as a module, which will be called
+	  "spacemit-p1-rtc".
+
 config RTC_DRV_NCT3018Y
 	tristate "Nuvoton NCT3018Y"
 	depends on OF
@@ -2044,20 +2054,6 @@ config RTC_DRV_RENESAS_RTCA3
 	  This driver can also be built as a module, if so, the module
 	  will be called "rtc-rtca3".
 
-comment "HID Sensor RTC drivers"
-
-config RTC_DRV_HID_SENSOR_TIME
-	tristate "HID Sensor Time"
-	depends on USB_HID
-	depends on HID_SENSOR_HUB && IIO
-	select HID_SENSOR_IIO_COMMON
-	help
-	  Say yes here to build support for the HID Sensors of type Time.
-	  This drivers makes such sensors available as RTCs.
-
-	  If this driver is compiled as a module, it will be named
-	  rtc-hid-sensor-time.
-
 config RTC_DRV_GOLDFISH
 	tristate "Goldfish Real Time Clock"
 	depends on HAS_IOMEM
@@ -2132,4 +2128,18 @@ config RTC_DRV_S32G
 	  This RTC module can be used as a wakeup source.
 	  Please note that it is not battery-powered.
 
+comment "HID Sensor RTC drivers"
+
+config RTC_DRV_HID_SENSOR_TIME
+	tristate "HID Sensor Time"
+	depends on USB_HID
+	depends on HID_SENSOR_HUB && IIO
+	select HID_SENSOR_IIO_COMMON
+	help
+	  Say yes here to build support for the HID Sensors of type Time.
+	  This drivers makes such sensors available as RTCs.
+
+	  If this driver is compiled as a module, it will be named
+	  rtc-hid-sensor-time.
+
 endif # RTC_CLASS

Documentation/devicetree/bindings/rtc/xgene-rtc.txt

@@ -172,6 +172,7 @@ obj-$(CONFIG_RTC_DRV_SD2405AL)	+= rtc-sd2405al.o
 obj-$(CONFIG_RTC_DRV_SD3078)	+= rtc-sd3078.o
 obj-$(CONFIG_RTC_DRV_SH)	+= rtc-sh.o
 obj-$(CONFIG_RTC_DRV_SNVS)	+= rtc-snvs.o
+obj-$(CONFIG_RTC_DRV_SPACEMIT_P1)	+= rtc-spacemit-p1.o
 obj-$(CONFIG_RTC_DRV_SPEAR)	+= rtc-spear.o
 obj-$(CONFIG_RTC_DRV_STARFIRE)	+= rtc-starfire.o
 obj-$(CONFIG_RTC_DRV_STK17TA8)	+= rtc-stk17ta8.o

drivers/rtc/Kconfig

@@ -443,6 +443,29 @@ static int __rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
 	else
 		err = rtc->ops->set_alarm(rtc->dev.parent, alarm);
 
+	/*
+	 * Check for potential race described above. If the waiting for next
+	 * second, and the second just ticked since the check above, either
+	 *
+	 * 1) It ticked after the alarm was set, and an alarm irq should be
+	 *    generated.
+	 *
+	 * 2) It ticked before the alarm was set, and alarm irq most likely will
+	 * not be generated.
+	 *
+	 * While we cannot easily check for which of these two scenarios we
+	 * are in, we can return -ETIME to signal that the timer has already
+	 * expired, which is true in both cases.
+	 */
+	if ((scheduled - now) <= 1) {
+		err = __rtc_read_time(rtc, &tm);
+		if (err)
+			return err;
+		now = rtc_tm_to_time64(&tm);
+		if (scheduled <= now)
+			return -ETIME;
+	}
+
 	trace_rtc_set_alarm(rtc_tm_to_time64(&alarm->time), err);
 	return err;
 }
@@ -594,6 +617,10 @@ int rtc_update_irq_enable(struct rtc_device *rtc, unsigned int enabled)
 		rtc->uie_rtctimer.node.expires = ktime_add(now, onesec);
 		rtc->uie_rtctimer.period = ktime_set(1, 0);
 		err = rtc_timer_enqueue(rtc, &rtc->uie_rtctimer);
+		if (!err && rtc->ops && rtc->ops->alarm_irq_enable)
+			err = rtc->ops->alarm_irq_enable(rtc->dev.parent, 1);
+		if (err)
+			goto out;
 	} else {
 		rtc_timer_remove(rtc, &rtc->uie_rtctimer);
 	}

drivers/rtc/Makefile

@@ -72,13 +72,6 @@ struct aml_rtc_data {
 	const struct aml_rtc_config *config;
 };
 
-static const struct regmap_config aml_rtc_regmap_config = {
-	.reg_bits = 32,
-	.val_bits = 32,
-	.reg_stride = 4,
-	.max_register = RTC_REAL_TIME,
-};
-
 static inline u32 gray_to_binary(u32 gray)
 {
 	u32 bcd = gray;
@@ -328,6 +321,13 @@ static int aml_rtc_probe(struct platform_device *pdev)
 	void __iomem *base;
 	int ret = 0;
 
+	const struct regmap_config aml_rtc_regmap_config = {
+		.reg_bits = 32,
+		.val_bits = 32,
+		.reg_stride = 4,
+		.max_register = RTC_REAL_TIME,
+	};
+
 	rtc = devm_kzalloc(dev, sizeof(*rtc), GFP_KERNEL);
 	if (!rtc)
 		return -ENOMEM;