Merge tag 'mmc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "There are no updates for the MEMSTICK subsystem this time. But note
  that I am also carrying a patch from the pinctrl tree, which has been
  shared through an immutable branch.

  Summary:

  MMC core:
   - Convert to reasonable timeouts for all CMD6 commands (updates for
     BKOPS, CACHE_FLUSH and INAND_CMD38_ARG_EXT_CSD) for eMMC
   - Respect f_max clock rate at card initialization
   - Add gpiod_toggle_active_low() API
   - Consolidate slot-gpio code by using gpiod_toggle_active_low()

  MMC host:
   - Add pinctrl_select_default_state() API
   - Consolidate pintctrl code by using pinctrl_select_default_state()
   - mmci: Support any block sizes for SDIO for some variants
   - mmci: Enable reset control for stm32_sdmmc
   - mmc_spi: Toggle SPI_CS_HIGH polarity rather than hard-coding it
   - renesas_sdhi: Add support for the r8a77961 variant
   - renesas_sdhi: A few minor improvements
   - rockchip-dw-mshc: Add support for the rk3308 variant
   - sdhci: Enable support for external DMA controllers
   - sdhci: Fixup error path when sending CMD12
   - sdhci-brcmstb: Add support for 7216b0 variant
   - sdhci-brcmstb: Add support for command queuing (CQHCI)
   - sdhci-brcmstb: Add support for eMMC HS400ES mode
   - sdhci-msm: Add support for the sc7180 variant
   - sdhci-msm: Add support for command queuing (CQHCI)
   - sdhci-of-at91: Add support for the SAM9x60 variant
   - sdhci-of-at91: Improve support for tunings
   - sdhci-of-esdhc: A few fixups for some clock related issues
   - sdhci-omap: Add support for the am335x and the am437x variants
   - sdhci-omap: Improve support for erase operations
   - sdhci-omap: Add support for external DMA"

* tag 'mmc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (89 commits)
  mmc: core: Default to generic_cmd6_time as timeout in __mmc_switch()
  mmc: block: Use generic_cmd6_time when modifying INAND_CMD38_ARG_EXT_CSD
  mmc: core: Specify timeouts for BKOPS and CACHE_FLUSH for eMMC
  mmc: sdhci-cadence: remove unneeded 'inline' marker
  dt-bindings: mmc: rockchip-dw-mshc: add description for rk3308
  dt-bindings: mmc: convert rockchip dw-mshc bindings to yaml
  dt-bindings: mmc: convert synopsys dw-mshc bindings to yaml
  mmc: sdhci-msm: Add CQHCI support for sdhci-msm
  mmc: sdhci: Let a vendor driver supply and update ADMA descriptor size
  mmc: sdhci-of-esdhc: fix serious issue clock is always disabled
  mmc: sdhci-of-esdhc: fix transfer mode register reading
  mmc: sdhci-brcmstb: Fix incorrect switch to HS mode
  mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)
  mmc: sdhci-brcmstb: Add shutdown callback
  mmc: sdhci-brcmstb: Fix driver to defer on clk_get defer
  mmc: sdhci-brcmstb: Add ability to use HS400ES transfer mode
  dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 7216b0
  mmc: core: limit probe clock frequency to configured f_max
  mmc: sdhci-milbeaut: Remove redundant platform_get_irq error message
  mmc: sdhci: fix an issue of mixing different types
  ...

Author: torvalds

Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt

@@ -11,28 +11,43 @@ Required properties:
 - compatible: should be one of the following
   - "brcm,bcm7425-sdhci"
   - "brcm,bcm7445-sdhci"
+  - "brcm,bcm7216-sdhci"
 
 Refer to clocks/clock-bindings.txt for generic clock consumer properties.
 
 Example:
 
-	sdhci@f03e0100 {
-		compatible = "brcm,bcm7425-sdhci";
-		reg = <0xf03e0000 0x100>;
-		interrupts = <0x0 0x26 0x0>;
-		sdhci,auto-cmd12;
-		clocks = <&sw_sdio>;
+	sdhci@84b0000 {
 		sd-uhs-sdr50;
 		sd-uhs-ddr50;
+		sd-uhs-sdr104;
+		sdhci,auto-cmd12;
+		compatible = "brcm,bcm7216-sdhci",
+			   "brcm,bcm7445-sdhci",
+			   "brcm,sdhci-brcmstb";
+		reg = <0x84b0000 0x260 0x84b0300 0x200>;
+		reg-names = "host", "cfg";
+		interrupts = <0x0 0x26 0x4>;
+		interrupt-names = "sdio0_0";
+		clocks = <&scmi_clk 245>;
+		clock-names = "sw_sdio";
 	};
 
-	sdhci@f03e0300 {
+	sdhci@84b1000 {
+		mmc-ddr-1_8v;
+		mmc-hs200-1_8v;
+		mmc-hs400-1_8v;
+		mmc-hs400-enhanced-strobe;
+		supports-cqe;
 		non-removable;
 		bus-width = <0x8>;
-		compatible = "brcm,bcm7425-sdhci";
-		reg = <0xf03e0200 0x100>;
-		interrupts = <0x0 0x27 0x0>;
-		sdhci,auto-cmd12;
-		clocks = <sw_sdio>;
-		mmc-hs200-1_8v;
+		compatible = "brcm,bcm7216-sdhci",
+			   "brcm,bcm7445-sdhci",
+			   "brcm,sdhci-brcmstb";
+		reg = <0x84b1000 0x260 0x84b1300 0x200>;
+		reg-names = "host", "cfg";
+		interrupts = <0x0 0x27 0x4>;
+		interrupt-names = "sdio1_0";
+		clocks = <&scmi_clk 245>;
+		clock-names = "sw_sdio";
 	};

Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt

@@ -21,6 +21,7 @@ Required properties:
 	       "fsl,imx8mq-usdhc"
 	       "fsl,imx8mm-usdhc"
 	       "fsl,imx8mn-usdhc"
+	       "fsl,imx8mp-usdhc"
 	       "fsl,imx8qxp-usdhc"
 
 Optional properties:

Documentation/devicetree/bindings/mmc/renesas,sdhi.txt

@@ -23,7 +23,8 @@ Required properties:
 		"renesas,sdhi-r8a7793" - SDHI IP on R8A7793 SoC
 		"renesas,sdhi-r8a7794" - SDHI IP on R8A7794 SoC
 		"renesas,sdhi-r8a7795" - SDHI IP on R8A7795 SoC
-		"renesas,sdhi-r8a7796" - SDHI IP on R8A7796 SoC
+		"renesas,sdhi-r8a7796" - SDHI IP on R8A77960 SoC
+		"renesas,sdhi-r8a77961" - SDHI IP on R8A77961 SoC
 		"renesas,sdhi-r8a77965" - SDHI IP on R8A77965 SoC
 		"renesas,sdhi-r8a77970" - SDHI IP on R8A77970 SoC
 		"renesas,sdhi-r8a77980" - SDHI IP on R8A77980 SoC

Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt

@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/rockchip-dw-mshc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip designware mobile storage host controller device tree bindings
+
+description:
+  Rockchip uses the Synopsys designware mobile storage host controller
+  to interface a SoC with storage medium such as eMMC or SD/MMC cards.
+  This file documents the combined properties for the core Synopsys dw mshc
+  controller that are not already included in the synopsys-dw-mshc-common.yaml
+  file and the Rockchip specific extensions.
+
+allOf:
+  - $ref: "synopsys-dw-mshc-common.yaml#"
+
+maintainers:
+  - Heiko Stuebner <[email protected]>
+
+# Everything else is described in the common file
+properties:
+  compatible:
+    oneOf:
+      # for Rockchip RK2928 and before RK3288
+      - const: rockchip,rk2928-dw-mshc
+      # for Rockchip RK3288
+      - const: rockchip,rk3288-dw-mshc
+      - items:
+          - enum:
+            # for Rockchip PX30
+            - rockchip,px30-dw-mshc
+            # for Rockchip RK3036
+            - rockchip,rk3036-dw-mshc
+            # for Rockchip RK322x
+            - rockchip,rk3228-dw-mshc
+            # for Rockchip RK3308
+            - rockchip,rk3308-dw-mshc
+            # for Rockchip RK3328
+            - rockchip,rk3328-dw-mshc
+            # for Rockchip RK3368
+            - rockchip,rk3368-dw-mshc
+            # for Rockchip RK3399
+            - rockchip,rk3399-dw-mshc
+            # for Rockchip RV1108
+            - rockchip,rv1108-dw-mshc
+          - const: rockchip,rk3288-dw-mshc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 4
+    description:
+      Handle to "biu" and "ciu" clocks for the bus interface unit clock and
+      the card interface unit clock. If "ciu-drive" and "ciu-sample" are
+      specified in clock-names, it should also contain
+      handles to these clocks.
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: biu
+      - const: ciu
+      - const: ciu-drive
+      - const: ciu-sample
+    description:
+      Apart from the clock-names "biu" and "ciu" two more clocks
+      "ciu-drive" and "ciu-sample" are supported. They are used
+      to control the clock phases, "ciu-sample" is required for tuning
+      high speed modes.
+
+  rockchip,default-sample-phase:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 360
+    default: 0
+    description:
+      The default phase to set "ciu-sample" at probing,
+      low speeds or in case where all phases work at tuning time.
+      If not specified 0 deg will be used.
+
+  rockchip,desired-num-phases:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 360
+    default: 360
+    description:
+      The desired number of times that the host execute tuning when needed.
+      If not specified, the host will do tuning for 360 times,
+      namely tuning for each degree.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    sdmmc: mmc@ff0c0000 {
+      compatible = "rockchip,rk3288-dw-mshc";
+      reg = <0x0 0xff0c0000 0x0 0x4000>;
+      interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+               <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+      clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+      resets = <&cru SRST_MMC0>;
+      reset-names = "reset";
+      fifo-depth = <0x100>;
+      max-frequency = <150000000>;
+    };
+
+...

Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml

@@ -5,22 +5,29 @@ Documentation/devicetree/bindings/mmc/mmc.txt and the properties used by the
 sdhci-of-at91 driver.
 
 Required properties:
-- compatible:		Must be "atmel,sama5d2-sdhci".
+- compatible:		Must be "atmel,sama5d2-sdhci" or "microchip,sam9x60-sdhci".
 - clocks:		Phandlers to the clocks.
-- clock-names:		Must be "hclock", "multclk", "baseclk";
+- clock-names:		Must be "hclock", "multclk", "baseclk" for
+			"atmel,sama5d2-sdhci".
+			Must be "hclock", "multclk" for "microchip,sam9x60-sdhci".
 
 Optional properties:
+- assigned-clocks:	The same with "multclk".
+- assigned-clock-rates	The rate of "multclk" in order to not rely on the
+			gck configuration set by previous components.
 - microchip,sdcal-inverted: when present, polarity on the SDCAL SoC pin is
   inverted. The default polarity for this signal is described in the datasheet.
   For instance on SAMA5D2, the pin is usually tied to the GND with a resistor
   and a capacitor (see "SDMMC I/O Calibration" chapter).
 
 Example:
 
-sdmmc0: sdio-host@a0000000 {
+mmc0: sdio-host@a0000000 {
 	compatible = "atmel,sama5d2-sdhci";
 	reg = <0xa0000000 0x300>;
 	interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
 	clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>;
 	clock-names = "hclock", "multclk", "baseclk";
+	assigned-clocks = <&sdmmc0_gclk>;
+	assigned-clock-rates = <480000000>;
 };

Documentation/devicetree/bindings/mmc/sdhci-atmel.txt

@@ -19,6 +19,7 @@ Required properties:
 		"qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"
 		"qcom,sdm845-sdhci", "qcom,sdhci-msm-v5"
 		"qcom,qcs404-sdhci", "qcom,sdhci-msm-v5"
+		"qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
 	NOTE that some old device tree files may be floating around that only
 	have the string "qcom,sdhci-msm-v4" without the SoC compatible string
 	but doing that should be considered a deprecated practice.

Documentation/devicetree/bindings/mmc/sdhci-msm.txt

@@ -7,6 +7,8 @@ For UHS devices which require tuning, the device tree should have a "cpu_thermal
 Required properties:
 - compatible: Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers
 	      Should be "ti,k2g-sdhci" for K2G
+	      Should be "ti,am335-sdhci" for am335x controllers
+	      Should be "ti,am437-sdhci" for am437x controllers
 - ti,hwmods: Must be "mmc<n>", <n> is controller instance starting 1
 	     (Not required for K2G).
 - pinctrl-names: Should be subset of "default", "hs", "sdr12", "sdr25", "sdr50",
@@ -15,11 +17,20 @@ Required properties:
 		 "hs200_1_8v",
 - pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt
 
+Optional properties:
+- dmas:		List of DMA specifiers with the controller specific format as described
+		in the generic DMA client binding. A tx and rx specifier is required.
+- dma-names:	List of DMA request names. These strings correspond 1:1 with the
+		DMA specifiers listed in dmas. The string naming is to be "tx"
+		and "rx" for TX and RX DMA requests, respectively.
+
 Example:
 	mmc1: mmc@4809c000 {
 		compatible = "ti,dra7-sdhci";
 		reg = <0x4809c000 0x400>;
 		ti,hwmods = "mmc1";
 		bus-width = <4>;
 		vmmc-supply = <&vmmc>; /* phandle to regulator node */
+		dmas = <&sdma 61 &sdma 62>;
+		dma-names = "tx", "rx";
 	};

Documentation/devicetree/bindings/mmc/sdhci-omap.txt

@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/synopsys-dw-mshc-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys Designware Mobile Storage Host Controller Common Properties
+
+allOf:
+  - $ref: "mmc-controller.yaml#"
+
+maintainers:
+  - Ulf Hansson <[email protected]>
+
+# Everything else is described in the common file
+properties:
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: reset
+
+  clock-frequency:
+    description:
+      Should be the frequency (in Hz) of the ciu clock.  If this
+      is specified and the ciu clock is specified then we'll try to set the ciu
+      clock to this at probe time.
+
+  fifo-depth:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The maximum size of the tx/rx fifo's. If this property is not
+      specified, the default value of the fifo size is determined from the
+      controller registers.
+
+  card-detect-delay:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - default: 0
+    description:
+      Delay in milli-seconds before detecting card after card
+      insert event. The default value is 0.
+
+  data-addr:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Override fifo address with value provided by DT. The default FIFO reg
+      offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A)
+      by driver. If the controller does not follow this rule, please use
+      this property to set fifo address in device tree.
+
+  fifo-watermark-aligned:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Data done irq is expected if data length is less than
+      watermark in PIO mode. But fifo watermark is requested to be aligned
+      with data length in some SoC so that TX/RX irq can be generated with
+      data done irq. Add this watermark quirk to mark this requirement and
+      force fifo watermark setting accordingly.
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx-tx