ARM: dts: qcom: sdx55: Move reset and wake gpios to board dts

The reset and wake properties in the PCIe EP node belong to the board dts
as they can be customized per board design. So let's move them from SoC
dtsi.

Signed-off-by: Manivannan Sadhasivam <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

Author: Mani-Sadhasivam

arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts

@@ -255,6 +255,9 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_ep_clkreq_default &pcie_ep_perst_default
 		     &pcie_ep_wake_default>;
+
+	reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
 };
 
 &qpic_bam {

arch/arm/boot/dts/qcom-sdx55.dtsi

@@ -421,8 +421,6 @@
 				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "global",
 					  "doorbell";
-			reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
-			wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
 			resets = <&gcc GCC_PCIE_BCR>;
 			reset-names = "core";
 			power-domains = <&gcc PCIE_GDSC>;