Merge tag 'v5.18' into rdma.git for-next

Following patches have dependencies.

Resolve the merge conflict in
drivers/net/ethernet/mellanox/mlx5/core/main.c by keeping the new names
for the fs functions following linux-next:

https://lore.kernel.org/r/[email protected]/

Signed-off-by: Jason Gunthorpe <[email protected]>

Author: jgunthorpe

.mailmap

@@ -45,6 +45,7 @@ Andrey Konovalov <[email protected]> <[email protected]>
 Andrey Ryabinin <[email protected]> <[email protected]>
 Andrey Ryabinin <[email protected]> <[email protected]>
 Andrzej Hajda <[email protected]> <[email protected]>
+André Almeida <[email protected]> <[email protected]>
 Andy Adamson <[email protected]>
 Antoine Tenart <[email protected]> <[email protected]>
 Antoine Tenart <[email protected]> <[email protected]>
@@ -204,6 +205,7 @@ Juha Yrjola <at solidboot.com>
 Juha Yrjola <[email protected]>
 Juha Yrjola <[email protected]>
 Julien Thierry <[email protected]> <[email protected]>
+Kalle Valo <[email protected]> <[email protected]>
 Kalyan Thota <[email protected]> <[email protected]>
 Kay Sievers <[email protected]>
 Kees Cook <[email protected]> <[email protected]>
@@ -249,6 +251,7 @@ Mark Yao <[email protected]> <[email protected]>
 Martin Kepplinger <[email protected]> <[email protected]>
 Martin Kepplinger <[email protected]> <[email protected]>
 Martin Kepplinger <[email protected]> <[email protected]>
+Martyna Szapar-Mudlaw <[email protected]> <[email protected]>
 Mathieu Othacehe <[email protected]>
 Matthew Wilcox <[email protected]> <[email protected]>
 Matthew Wilcox <[email protected]> <[email protected]>
@@ -391,6 +394,10 @@ Uwe Kleine-König <[email protected]>
 Uwe Kleine-König <[email protected]>
 Uwe Kleine-König <[email protected]>
 Valdis Kletnieks <[email protected]>
+Vasily Averin <[email protected]> <[email protected]>
+Vasily Averin <[email protected]> <[email protected]>
+Vasily Averin <[email protected]> <[email protected]>
+Vasily Averin <[email protected]> <[email protected]>
 Vinod Koul <[email protected]> <[email protected]>
 Vinod Koul <[email protected]> <[email protected]>
 Vinod Koul <[email protected]> <[email protected]>

Documentation/ABI/testing/sysfs-class-firmware-attributes

@@ -116,7 +116,7 @@ Description:
 					    <value>[ForceIf:<attribute>=<value>]
 					    <value>[ForceIfNot:<attribute>=<value>]
 
-					For example:
+					For example::
 
 					    LegacyOrom/dell_value_modifier has value:
 						    Disabled[ForceIf:SecureBoot=Enabled]
@@ -212,7 +212,7 @@ Description:
 		the next boot.
 
 		Lenovo specific class extensions
-		------------------------------
+		--------------------------------
 
 		On Lenovo systems the following additional settings are available:
 
@@ -246,9 +246,7 @@ Description:
 					that is being referenced (e.g hdd0, hdd1 etc)
 					This attribute defaults to device 0.
 
-		certificate:
-		signature:
-		save_signature:
+		certificate, signature, save_signature:
 					These attributes are used for certificate based authentication. This is
 					used in conjunction with a signing server as an alternative to password
 					based authentication.
@@ -257,22 +255,27 @@ Description:
 					The attributes can be displayed to check the stored value.
 
 					Some usage examples:
-					Installing a certificate to enable feature:
-						echo <supervisor password > authentication/Admin/current_password
-						echo <signed certificate> > authentication/Admin/certificate
 
-					Updating the installed certificate:
-						echo <signature> > authentication/Admin/signature
-						echo <signed certificate> > authentication/Admin/certificate
+						Installing a certificate to enable feature::
+
+							echo "supervisor password" > authentication/Admin/current_password
+							echo "signed certificate" > authentication/Admin/certificate
+
+						Updating the installed certificate::
+
+							echo "signature" > authentication/Admin/signature
+							echo "signed certificate" > authentication/Admin/certificate
 
-					Removing the installed certificate:
-						echo <signature> > authentication/Admin/signature
-						echo '' > authentication/Admin/certificate
+						Removing the installed certificate::
 
-					Changing a BIOS setting:
-						echo <signature> > authentication/Admin/signature
-						echo <save signature> > authentication/Admin/save_signature
-						echo Enable > attribute/PasswordBeep/current_value
+							echo "signature" > authentication/Admin/signature
+							echo "" > authentication/Admin/certificate
+
+						Changing a BIOS setting::
+
+							echo "signature" > authentication/Admin/signature
+							echo "save signature" > authentication/Admin/save_signature
+							echo Enable > attribute/PasswordBeep/current_value
 
 					You cannot enable certificate authentication if a supervisor password
 					has not been set.
@@ -288,9 +291,10 @@ Description:
 		certificate_to_password:
 					Write only attribute used to switch from certificate based authentication
 					back to password based.
-					Usage:
-						echo <signature> > authentication/Admin/signature
-						echo <password> > authentication/Admin/certificate_to_password
+					Usage::
+
+						echo "signature" > authentication/Admin/signature
+						echo "password" > authentication/Admin/certificate_to_password
 
 
 What:		/sys/class/firmware-attributes/*/attributes/pending_reboot
@@ -345,7 +349,7 @@ Description:
 
 		    # echo "factory" > /sys/class/firmware-attributes/*/device/attributes/reset_bios
 		    # cat /sys/class/firmware-attributes/*/device/attributes/reset_bios
-		    # builtinsafe lastknowngood [factory] custom
+		    builtinsafe lastknowngood [factory] custom
 
 		Note that any changes to this attribute requires a reboot
 		for changes to take effect.

Documentation/ABI/testing/sysfs-driver-intel_sdsi

@@ -13,17 +13,19 @@ Description:
 		Should the operation fail, one of the following error codes
 		may be returned:
 
+		==========	=====
 		Error Code	Cause
-	        ----------	-----
-	        EIO		General mailbox failure. Log may indicate cause.
-	        EBUSY		Mailbox is owned by another agent.
-	        EPERM		SDSI capability is not enabled in hardware.
-	        EPROTO		Failure in mailbox protocol detected by driver.
+		==========	=====
+		EIO		General mailbox failure. Log may indicate cause.
+		EBUSY		Mailbox is owned by another agent.
+		EPERM		SDSI capability is not enabled in hardware.
+		EPROTO		Failure in mailbox protocol detected by driver.
 				See log for details.
-	        EOVERFLOW	For provision commands, the size of the data
+		EOVERFLOW	For provision commands, the size of the data
 				exceeds what may be written.
-	        ESPIPE		Seeking is not allowed.
-	        ETIMEDOUT	Failure to complete mailbox transaction in time.
+		ESPIPE		Seeking is not allowed.
+		ETIMEDOUT	Failure to complete mailbox transaction in time.
+		==========	=====
 
 What:		/sys/bus/auxiliary/devices/intel_vsec.sdsi.X/guid
 Date:		Feb 2022

Documentation/ABI/testing/sysfs-fs-erofs

@@ -9,8 +9,9 @@ Description:	Shows all enabled kernel features.
 What:		/sys/fs/erofs/<disk>/sync_decompress
 Date:		November 2021
 Contact:	"Huang Jianan" <[email protected]>
-Description:	Control strategy of sync decompression
+Description:	Control strategy of sync decompression:
+
 		- 0 (default, auto): enable for readpage, and enable for
-				     readahead on atomic contexts only,
+		  readahead on atomic contexts only.
 		- 1 (force on): enable for readpage and readahead.
 		- 2 (force off): disable for all situations.

Documentation/arm64/memory-tagging-extension.rst

@@ -228,10 +228,10 @@ Core dump support
 -----------------
 
 The allocation tags for user memory mapped with ``PROT_MTE`` are dumped
-in the core file as additional ``PT_ARM_MEMTAG_MTE`` segments. The
+in the core file as additional ``PT_AARCH64_MEMTAG_MTE`` segments. The
 program header for such segment is defined as:
 
-:``p_type``: ``PT_ARM_MEMTAG_MTE``
+:``p_type``: ``PT_AARCH64_MEMTAG_MTE``
 :``p_flags``: 0
 :``p_offset``: segment file offset
 :``p_vaddr``: segment virtual address, same as the corresponding

Documentation/arm64/silicon-errata.rst

@@ -189,6 +189,9 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | Kryo4xx Silver  | N/A             | ARM64_ERRATUM_1024718       |
 +----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo4xx Gold    | N/A             | ARM64_ERRATUM_1286807       |
++----------------+-----------------+-----------------+-----------------------------+
+
 +----------------+-----------------+-----------------+-----------------------------+
 | Fujitsu        | A64FX           | E#010001        | FUJITSU_ERRATUM_010001      |
 +----------------+-----------------+-----------------+-----------------------------+

Documentation/dev-tools/kunit/start.rst

@@ -41,13 +41,18 @@ or ``VFAT_FS``. To run ``FAT_KUNIT_TEST``, the ``.kunitconfig`` has:
 	CONFIG_MSDOS_FS=y
 	CONFIG_FAT_KUNIT_TEST=y
 
-1. A good starting point for the ``.kunitconfig``, is the KUnit default
-   config. Run the command:
+1. A good starting point for the ``.kunitconfig`` is the KUnit default config.
+   You can generate it by running:
 
 .. code-block:: bash
 
 	cd $PATH_TO_LINUX_REPO
-	cp tools/testing/kunit/configs/default.config .kunitconfig
+	tools/testing/kunit/kunit.py config
+	cat .kunit/.kunitconfig
+
+.. note ::
+   ``.kunitconfig`` lives in the ``--build_dir`` used by kunit.py, which is
+   ``.kunit`` by default.
 
 .. note ::
    You may want to remove CONFIG_KUNIT_ALL_TESTS from the ``.kunitconfig`` as

Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml

@@ -13,7 +13,6 @@ maintainers:
 properties:
   compatible:
     enum:
-      - nvidia,tegra20-pmc
       - nvidia,tegra20-pmc
       - nvidia,tegra30-pmc
       - nvidia,tegra114-pmc

Documentation/devicetree/bindings/bus/ti-sysc.yaml

@@ -34,7 +34,6 @@ properties:
     oneOf:
       - items:
           - enum:
-              - ti,sysc-omap2
               - ti,sysc-omap2
               - ti,sysc-omap4
               - ti,sysc-omap4-simple

Documentation/devicetree/bindings/clock/imx8m-clock.yaml

@@ -55,8 +55,6 @@ allOf:
     then:
       properties:
         clocks:
-          minItems: 7
-          maxItems: 7
           items:
             - description: 32k osc
             - description: 25m osc
@@ -66,8 +64,6 @@ allOf:
             - description: ext3 clock input
             - description: ext4 clock input
         clock-names:
-          minItems: 7
-          maxItems: 7
           items:
             - const: ckil
             - const: osc_25m