Merge tag 'soc-fsl-next-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers

NXP/FSL SoC driver updates for v5.6

QUICC Engine drivers
- Improve the QE drivers to be compatible with ARM/ARM64/PPC64
architectures
- Various cleanups to the QE drivers

* tag 'soc-fsl-next-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: (49 commits)
  soc: fsl: qe: remove set but not used variable 'mm_gc'
  soc: fsl: qe: remove PPC32 dependency from CONFIG_QUICC_ENGINE
  soc: fsl: qe: remove unused #include of asm/irq.h from ucc.c
  net: ethernet: freescale: make UCC_GETH explicitly depend on PPC32
  net/wan/fsl_ucc_hdlc: reject muram offsets above 64K
  net/wan/fsl_ucc_hdlc: fix reading of __be16 registers
  net/wan/fsl_ucc_hdlc: avoid use of IS_ERR_VALUE()
  soc: fsl: qe: avoid IS_ERR_VALUE in ucc_fast.c
  soc: fsl: qe: drop pointless check in qe_sdma_init()
  soc: fsl: qe: drop use of IS_ERR_VALUE in qe_sdma_init()
  soc: fsl: qe: avoid IS_ERR_VALUE in ucc_slow.c
  soc: fsl: qe: refactor cpm_muram_alloc_common to prevent BUG on error path
  soc: fsl: qe: drop broken lazy call of cpm_muram_init()
  soc: fsl: qe: make cpm_muram_free() ignore a negative offset
  soc: fsl: qe: make cpm_muram_free() return void
  soc: fsl: qe: change return type of cpm_muram_alloc() to s32
  serial: ucc_uart: access __be32 field using be32_to_cpu
  serial: ucc_uart: limit brg-frequency workaround to PPC32
  serial: ucc_uart: use of_property_read_u32() in ucc_uart_probe()
  serial: ucc_uart: stub out soft_uart_init for !CONFIG_PPC32
  ...

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>

Author: olofj

arch/powerpc/include/asm/cpm.h

@@ -1,171 +1 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __CPM_H
-#define __CPM_H
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/of.h>
-#include <soc/fsl/qe/qe.h>
-
-/*
- * SPI Parameter RAM common to QE and CPM.
- */
-struct spi_pram {
-	__be16	rbase;	/* Rx Buffer descriptor base address */
-	__be16	tbase;	/* Tx Buffer descriptor base address */
-	u8	rfcr;	/* Rx function code */
-	u8	tfcr;	/* Tx function code */
-	__be16	mrblr;	/* Max receive buffer length */
-	__be32	rstate;	/* Internal */
-	__be32	rdp;	/* Internal */
-	__be16	rbptr;	/* Internal */
-	__be16	rbc;	/* Internal */
-	__be32	rxtmp;	/* Internal */
-	__be32	tstate;	/* Internal */
-	__be32	tdp;	/* Internal */
-	__be16	tbptr;	/* Internal */
-	__be16	tbc;	/* Internal */
-	__be32	txtmp;	/* Internal */
-	__be32	res;	/* Tx temp. */
-	__be16  rpbase;	/* Relocation pointer (CPM1 only) */
-	__be16	res1;	/* Reserved */
-};
-
-/*
- * USB Controller pram common to QE and CPM.
- */
-struct usb_ctlr {
-	u8	usb_usmod;
-	u8	usb_usadr;
-	u8	usb_uscom;
-	u8	res1[1];
-	__be16	usb_usep[4];
-	u8	res2[4];
-	__be16	usb_usber;
-	u8	res3[2];
-	__be16	usb_usbmr;
-	u8	res4[1];
-	u8	usb_usbs;
-	/* Fields down below are QE-only */
-	__be16	usb_ussft;
-	u8	res5[2];
-	__be16	usb_usfrn;
-	u8	res6[0x22];
-} __attribute__ ((packed));
-
-/*
- * Function code bits, usually generic to devices.
- */
-#ifdef CONFIG_CPM1
-#define CPMFCR_GBL	((u_char)0x00)	/* Flag doesn't exist in CPM1 */
-#define CPMFCR_TC2	((u_char)0x00)	/* Flag doesn't exist in CPM1 */
-#define CPMFCR_DTB	((u_char)0x00)	/* Flag doesn't exist in CPM1 */
-#define CPMFCR_BDB	((u_char)0x00)	/* Flag doesn't exist in CPM1 */
-#else
-#define CPMFCR_GBL	((u_char)0x20)	/* Set memory snooping */
-#define CPMFCR_TC2	((u_char)0x04)	/* Transfer code 2 value */
-#define CPMFCR_DTB	((u_char)0x02)	/* Use local bus for data when set */
-#define CPMFCR_BDB	((u_char)0x01)	/* Use local bus for BD when set */
-#endif
-#define CPMFCR_EB	((u_char)0x10)	/* Set big endian byte order */
-
-/* Opcodes common to CPM1 and CPM2
-*/
-#define CPM_CR_INIT_TRX		((ushort)0x0000)
-#define CPM_CR_INIT_RX		((ushort)0x0001)
-#define CPM_CR_INIT_TX		((ushort)0x0002)
-#define CPM_CR_HUNT_MODE	((ushort)0x0003)
-#define CPM_CR_STOP_TX		((ushort)0x0004)
-#define CPM_CR_GRA_STOP_TX	((ushort)0x0005)
-#define CPM_CR_RESTART_TX	((ushort)0x0006)
-#define CPM_CR_CLOSE_RX_BD	((ushort)0x0007)
-#define CPM_CR_SET_GADDR	((ushort)0x0008)
-#define CPM_CR_SET_TIMER	((ushort)0x0008)
-#define CPM_CR_STOP_IDMA	((ushort)0x000b)
-
-/* Buffer descriptors used by many of the CPM protocols. */
-typedef struct cpm_buf_desc {
-	ushort	cbd_sc;		/* Status and Control */
-	ushort	cbd_datlen;	/* Data length in buffer */
-	uint	cbd_bufaddr;	/* Buffer address in host memory */
-} cbd_t;
-
-/* Buffer descriptor control/status used by serial
- */
-
-#define BD_SC_EMPTY	(0x8000)	/* Receive is empty */
-#define BD_SC_READY	(0x8000)	/* Transmit is ready */
-#define BD_SC_WRAP	(0x2000)	/* Last buffer descriptor */
-#define BD_SC_INTRPT	(0x1000)	/* Interrupt on change */
-#define BD_SC_LAST	(0x0800)	/* Last buffer in frame */
-#define BD_SC_TC	(0x0400)	/* Transmit CRC */
-#define BD_SC_CM	(0x0200)	/* Continuous mode */
-#define BD_SC_ID	(0x0100)	/* Rec'd too many idles */
-#define BD_SC_P		(0x0100)	/* xmt preamble */
-#define BD_SC_BR	(0x0020)	/* Break received */
-#define BD_SC_FR	(0x0010)	/* Framing error */
-#define BD_SC_PR	(0x0008)	/* Parity error */
-#define BD_SC_NAK	(0x0004)	/* NAK - did not respond */
-#define BD_SC_OV	(0x0002)	/* Overrun */
-#define BD_SC_UN	(0x0002)	/* Underrun */
-#define BD_SC_CD	(0x0001)	/* */
-#define BD_SC_CL	(0x0001)	/* Collision */
-
-/* Buffer descriptor control/status used by Ethernet receive.
- * Common to SCC and FCC.
- */
-#define BD_ENET_RX_EMPTY	(0x8000)
-#define BD_ENET_RX_WRAP		(0x2000)
-#define BD_ENET_RX_INTR		(0x1000)
-#define BD_ENET_RX_LAST		(0x0800)
-#define BD_ENET_RX_FIRST	(0x0400)
-#define BD_ENET_RX_MISS		(0x0100)
-#define BD_ENET_RX_BC		(0x0080)	/* FCC Only */
-#define BD_ENET_RX_MC		(0x0040)	/* FCC Only */
-#define BD_ENET_RX_LG		(0x0020)
-#define BD_ENET_RX_NO		(0x0010)
-#define BD_ENET_RX_SH		(0x0008)
-#define BD_ENET_RX_CR		(0x0004)
-#define BD_ENET_RX_OV		(0x0002)
-#define BD_ENET_RX_CL		(0x0001)
-#define BD_ENET_RX_STATS	(0x01ff)	/* All status bits */
-
-/* Buffer descriptor control/status used by Ethernet transmit.
- * Common to SCC and FCC.
- */
-#define BD_ENET_TX_READY	(0x8000)
-#define BD_ENET_TX_PAD		(0x4000)
-#define BD_ENET_TX_WRAP		(0x2000)
-#define BD_ENET_TX_INTR		(0x1000)
-#define BD_ENET_TX_LAST		(0x0800)
-#define BD_ENET_TX_TC		(0x0400)
-#define BD_ENET_TX_DEF		(0x0200)
-#define BD_ENET_TX_HB		(0x0100)
-#define BD_ENET_TX_LC		(0x0080)
-#define BD_ENET_TX_RL		(0x0040)
-#define BD_ENET_TX_RCMASK	(0x003c)
-#define BD_ENET_TX_UN		(0x0002)
-#define BD_ENET_TX_CSL		(0x0001)
-#define BD_ENET_TX_STATS	(0x03ff)	/* All status bits */
-
-/* Buffer descriptor control/status used by Transparent mode SCC.
- */
-#define BD_SCC_TX_LAST		(0x0800)
-
-/* Buffer descriptor control/status used by I2C.
- */
-#define BD_I2C_START		(0x0400)
-
-#ifdef CONFIG_CPM
-int cpm_command(u32 command, u8 opcode);
-#else
-static inline int cpm_command(u32 command, u8 opcode)
-{
-	return -ENOSYS;
-}
-#endif /* CONFIG_CPM */
-
-int cpm2_gpiochip_add32(struct device *dev);
-
-#endif
+#include <soc/fsl/cpm.h>

arch/powerpc/platforms/83xx/km83xx.c

@@ -34,7 +34,6 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 #include <soc/fsl/qe/qe.h>
-#include <soc/fsl/qe/qe_ic.h>
 
 #include "mpc83xx.h"
 
@@ -178,7 +177,7 @@ define_machine(mpc83xx_km) {
 	.name		= "mpc83xx-km-platform",
 	.probe		= mpc83xx_km_probe,
 	.setup_arch	= mpc83xx_km_setup_arch,
-	.init_IRQ	= mpc83xx_ipic_and_qe_init_IRQ,
+	.init_IRQ	= mpc83xx_ipic_init_IRQ,
 	.get_irq	= ipic_get_irq,
 	.restart	= mpc83xx_restart,
 	.time_init	= mpc83xx_time_init,

arch/powerpc/platforms/83xx/misc.c

@@ -14,7 +14,6 @@
 #include <asm/io.h>
 #include <asm/hw_irq.h>
 #include <asm/ipic.h>
-#include <soc/fsl/qe/qe_ic.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
@@ -91,28 +90,6 @@ void __init mpc83xx_ipic_init_IRQ(void)
 	ipic_set_default_priority();
 }
 
-#ifdef CONFIG_QUICC_ENGINE
-void __init mpc83xx_qe_init_IRQ(void)
-{
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-	if (!np) {
-		np = of_find_node_by_type(NULL, "qeic");
-		if (!np)
-			return;
-	}
-	qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
-	of_node_put(np);
-}
-
-void __init mpc83xx_ipic_and_qe_init_IRQ(void)
-{
-	mpc83xx_ipic_init_IRQ();
-	mpc83xx_qe_init_IRQ();
-}
-#endif /* CONFIG_QUICC_ENGINE */
-
 static const struct of_device_id of_bus_ids[] __initconst = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },

arch/powerpc/platforms/83xx/mpc832x_mds.c

@@ -33,7 +33,6 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 #include <soc/fsl/qe/qe.h>
-#include <soc/fsl/qe/qe_ic.h>
 
 #include "mpc83xx.h"
 
@@ -102,7 +101,7 @@ define_machine(mpc832x_mds) {
 	.name 		= "MPC832x MDS",
 	.probe 		= mpc832x_sys_probe,
 	.setup_arch 	= mpc832x_sys_setup_arch,
-	.init_IRQ	= mpc83xx_ipic_and_qe_init_IRQ,
+	.init_IRQ	= mpc83xx_ipic_init_IRQ,
 	.get_irq 	= ipic_get_irq,
 	.restart 	= mpc83xx_restart,
 	.time_init 	= mpc83xx_time_init,

arch/powerpc/platforms/83xx/mpc832x_rdb.c

@@ -22,7 +22,6 @@
 #include <asm/ipic.h>
 #include <asm/udbg.h>
 #include <soc/fsl/qe/qe.h>
-#include <soc/fsl/qe/qe_ic.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
@@ -220,7 +219,7 @@ define_machine(mpc832x_rdb) {
 	.name		= "MPC832x RDB",
 	.probe		= mpc832x_rdb_probe,
 	.setup_arch	= mpc832x_rdb_setup_arch,
-	.init_IRQ	= mpc83xx_ipic_and_qe_init_IRQ,
+	.init_IRQ	= mpc83xx_ipic_init_IRQ,
 	.get_irq	= ipic_get_irq,
 	.restart	= mpc83xx_restart,
 	.time_init	= mpc83xx_time_init,

arch/powerpc/platforms/83xx/mpc836x_mds.c

@@ -40,7 +40,6 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 #include <soc/fsl/qe/qe.h>
-#include <soc/fsl/qe/qe_ic.h>
 
 #include "mpc83xx.h"
 
@@ -202,7 +201,7 @@ define_machine(mpc836x_mds) {
 	.name		= "MPC836x MDS",
 	.probe		= mpc836x_mds_probe,
 	.setup_arch	= mpc836x_mds_setup_arch,
-	.init_IRQ	= mpc83xx_ipic_and_qe_init_IRQ,
+	.init_IRQ	= mpc83xx_ipic_init_IRQ,
 	.get_irq	= ipic_get_irq,
 	.restart	= mpc83xx_restart,
 	.time_init	= mpc83xx_time_init,

arch/powerpc/platforms/83xx/mpc836x_rdk.c

@@ -17,7 +17,6 @@
 #include <asm/ipic.h>
 #include <asm/udbg.h>
 #include <soc/fsl/qe/qe.h>
-#include <soc/fsl/qe/qe_ic.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
@@ -42,7 +41,7 @@ define_machine(mpc836x_rdk) {
 	.name		= "MPC836x RDK",
 	.probe		= mpc836x_rdk_probe,
 	.setup_arch	= mpc836x_rdk_setup_arch,
-	.init_IRQ	= mpc83xx_ipic_and_qe_init_IRQ,
+	.init_IRQ	= mpc83xx_ipic_init_IRQ,
 	.get_irq	= ipic_get_irq,
 	.restart	= mpc83xx_restart,
 	.time_init	= mpc83xx_time_init,

arch/powerpc/platforms/83xx/mpc83xx.h

@@ -72,13 +72,6 @@ extern int mpc837x_usb_cfg(void);
 extern int mpc834x_usb_cfg(void);
 extern int mpc831x_usb_cfg(void);
 extern void mpc83xx_ipic_init_IRQ(void);
-#ifdef CONFIG_QUICC_ENGINE
-extern void mpc83xx_qe_init_IRQ(void);
-extern void mpc83xx_ipic_and_qe_init_IRQ(void);
-#else
-static inline void __init mpc83xx_qe_init_IRQ(void) {}
-#define mpc83xx_ipic_and_qe_init_IRQ mpc83xx_ipic_init_IRQ
-#endif /* CONFIG_QUICC_ENGINE */
 
 #ifdef CONFIG_PCI
 extern void mpc83xx_setup_pci(void);

arch/powerpc/platforms/85xx/corenet_generic.c

@@ -24,7 +24,6 @@
 #include <asm/mpic.h>
 #include <asm/ehv_pic.h>
 #include <asm/swiotlb.h>
-#include <soc/fsl/qe/qe_ic.h>
 
 #include <linux/of_platform.h>
 #include <sysdev/fsl_soc.h>
@@ -38,22 +37,13 @@ void __init corenet_gen_pic_init(void)
 	unsigned int flags = MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU |
 		MPIC_NO_RESET;
 
-	struct device_node *np;
-
 	if (ppc_md.get_irq == mpic_get_coreint_irq)
 		flags |= MPIC_ENABLE_COREINT;
 
 	mpic = mpic_alloc(NULL, 0, flags, 0, 512, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
 
 	mpic_init(mpic);
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-	if (np) {
-		qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
-				qe_ic_cascade_high_mpic);
-		of_node_put(np);
-	}
 }
 
 /*

arch/powerpc/platforms/85xx/mpc85xx_mds.c

@@ -44,7 +44,6 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 #include <soc/fsl/qe/qe.h>
-#include <soc/fsl/qe/qe_ic.h>
 #include <asm/mpic.h>
 #include <asm/swiotlb.h>
 #include "smp.h"
@@ -268,33 +267,8 @@ static void __init mpc85xx_mds_qe_init(void)
 	}
 }
 
-static void __init mpc85xx_mds_qeic_init(void)
-{
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
-	if (!of_device_is_available(np)) {
-		of_node_put(np);
-		return;
-	}
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-	if (!np) {
-		np = of_find_node_by_type(NULL, "qeic");
-		if (!np)
-			return;
-	}
-
-	if (machine_is(p1021_mds))
-		qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
-				qe_ic_cascade_high_mpic);
-	else
-		qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
-	of_node_put(np);
-}
 #else
 static void __init mpc85xx_mds_qe_init(void) { }
-static void __init mpc85xx_mds_qeic_init(void) { }
 #endif	/* CONFIG_QUICC_ENGINE */
 
 static void __init mpc85xx_mds_setup_arch(void)
@@ -364,7 +338,6 @@ static void __init mpc85xx_mds_pic_init(void)
 	BUG_ON(mpic == NULL);
 
 	mpic_init(mpic);
-	mpc85xx_mds_qeic_init();
 }
 
 static int __init mpc85xx_mds_probe(void)