drm/i915: Read rawclk_freq earlier

Read the rawclk_freq during runtime info probing, prior to its first use
in computing the CS timestamp frequency. Then store it in the runtime
info, and include it in the debug printouts.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/834
Signed-off-by: Chris Wilson <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

Author: ickle

drivers/gpu/drm/i915/display/intel_cdclk.c

@@ -2693,28 +2693,29 @@ static int g4x_hrawclk(struct drm_i915_private *dev_priv)
 }
 
 /**
- * intel_update_rawclk - Determine the current RAWCLK frequency
+ * intel_read_rawclk - Determine the current RAWCLK frequency
  * @dev_priv: i915 device
  *
  * Determine the current RAWCLK frequency. RAWCLK is a fixed
  * frequency clock so this needs to done only once.
  */
-void intel_update_rawclk(struct drm_i915_private *dev_priv)
+u32 intel_read_rawclk(struct drm_i915_private *dev_priv)
 {
+	u32 freq;
+
 	if (INTEL_PCH_TYPE(dev_priv) >= PCH_CNP)
-		dev_priv->rawclk_freq = cnp_rawclk(dev_priv);
+		freq = cnp_rawclk(dev_priv);
 	else if (HAS_PCH_SPLIT(dev_priv))
-		dev_priv->rawclk_freq = pch_rawclk(dev_priv);
+		freq = pch_rawclk(dev_priv);
 	else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
-		dev_priv->rawclk_freq = vlv_hrawclk(dev_priv);
+		freq = vlv_hrawclk(dev_priv);
 	else if (IS_G4X(dev_priv) || IS_PINEVIEW(dev_priv))
-		dev_priv->rawclk_freq = g4x_hrawclk(dev_priv);
+		freq = g4x_hrawclk(dev_priv);
 	else
 		/* no rawclk on other platforms, or no need to know it */
-		return;
+		return 0;
 
-	drm_dbg(&dev_priv->drm, "rawclk rate: %d kHz\n",
-		dev_priv->rawclk_freq);
+	return freq;
 }
 
 /**

drivers/gpu/drm/i915/display/intel_cdclk.h

@@ -61,7 +61,7 @@ void intel_cdclk_uninit_hw(struct drm_i915_private *i915);
 void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv);
 void intel_update_max_cdclk(struct drm_i915_private *dev_priv);
 void intel_update_cdclk(struct drm_i915_private *dev_priv);
-void intel_update_rawclk(struct drm_i915_private *dev_priv);
+u32 intel_read_rawclk(struct drm_i915_private *dev_priv);
 bool intel_cdclk_needs_modeset(const struct intel_cdclk_config *a,
 			       const struct intel_cdclk_config *b);
 void intel_set_cdclk_pre_plane_update(struct intel_atomic_state *state);

drivers/gpu/drm/i915/display/intel_display_power.c

@@ -1260,10 +1260,10 @@ static void vlv_init_display_clock_gating(struct drm_i915_private *dev_priv)
 		       MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE);
 	intel_de_write(dev_priv, CBR1_VLV, 0);
 
-	WARN_ON(dev_priv->rawclk_freq == 0);
-
+	WARN_ON(RUNTIME_INFO(dev_priv)->rawclk_freq == 0);
 	intel_de_write(dev_priv, RAWCLK_FREQ_VLV,
-		       DIV_ROUND_CLOSEST(dev_priv->rawclk_freq, 1000));
+		       DIV_ROUND_CLOSEST(RUNTIME_INFO(dev_priv)->rawclk_freq,
+					 1000));
 }
 
 static void vlv_display_power_well_init(struct drm_i915_private *dev_priv)
@@ -5236,9 +5236,6 @@ void intel_power_domains_init_hw(struct drm_i915_private *i915, bool resume)
 
 	power_domains->initializing = true;
 
-	/* Must happen before power domain init on VLV/CHV */
-	intel_update_rawclk(i915);
-
 	if (INTEL_GEN(i915) >= 11) {
 		icl_display_core_init(i915, resume);
 	} else if (IS_CANNONLAKE(i915)) {

drivers/gpu/drm/i915/display/intel_dp.c

@@ -1213,13 +1213,14 @@ static u32 g4x_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
 	 * The clock divider is based off the hrawclk, and would like to run at
 	 * 2MHz.  So, take the hrawclk value and divide by 2000 and use that
 	 */
-	return DIV_ROUND_CLOSEST(dev_priv->rawclk_freq, 2000);
+	return DIV_ROUND_CLOSEST(RUNTIME_INFO(dev_priv)->rawclk_freq, 2000);
 }
 
 static u32 ilk_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
 {
 	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
 	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+	u32 freq;
 
 	if (index)
 		return 0;
@@ -1230,9 +1231,10 @@ static u32 ilk_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
 	 * divide by 2000 and use that
 	 */
 	if (dig_port->aux_ch == AUX_CH_A)
-		return DIV_ROUND_CLOSEST(dev_priv->cdclk.hw.cdclk, 2000);
+		freq = dev_priv->cdclk.hw.cdclk;
 	else
-		return DIV_ROUND_CLOSEST(dev_priv->rawclk_freq, 2000);
+		freq = RUNTIME_INFO(dev_priv)->rawclk_freq;
+	return DIV_ROUND_CLOSEST(freq, 2000);
 }
 
 static u32 hsw_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
@@ -6883,7 +6885,7 @@ intel_dp_init_panel_power_sequencer_registers(struct intel_dp *intel_dp,
 {
 	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
 	u32 pp_on, pp_off, port_sel = 0;
-	int div = dev_priv->rawclk_freq / 1000;
+	int div = RUNTIME_INFO(dev_priv)->rawclk_freq / 1000;
 	struct pps_registers regs;
 	enum port port = dp_to_dig_port(intel_dp)->base.port;
 	const struct edp_power_seq *seq = &intel_dp->pps_delays;

drivers/gpu/drm/i915/display/intel_panel.c

@@ -1406,7 +1406,8 @@ static u32 cnp_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz)
 {
 	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
 
-	return DIV_ROUND_CLOSEST(KHz(dev_priv->rawclk_freq), pwm_freq_hz);
+	return DIV_ROUND_CLOSEST(KHz(RUNTIME_INFO(dev_priv)->rawclk_freq),
+				 pwm_freq_hz);
 }
 
 /*
@@ -1467,7 +1468,8 @@ static u32 pch_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz)
 {
 	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
 
-	return DIV_ROUND_CLOSEST(KHz(dev_priv->rawclk_freq), pwm_freq_hz * 128);
+	return DIV_ROUND_CLOSEST(KHz(RUNTIME_INFO(dev_priv)->rawclk_freq),
+				 pwm_freq_hz * 128);
 }
 
 /*
@@ -1484,7 +1486,7 @@ static u32 i9xx_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz)
 	int clock;
 
 	if (IS_PINEVIEW(dev_priv))
-		clock = KHz(dev_priv->rawclk_freq);
+		clock = KHz(RUNTIME_INFO(dev_priv)->rawclk_freq);
 	else
 		clock = KHz(dev_priv->cdclk.hw.cdclk);
 
@@ -1502,7 +1504,7 @@ static u32 i965_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz)
 	int clock;
 
 	if (IS_G4X(dev_priv))
-		clock = KHz(dev_priv->rawclk_freq);
+		clock = KHz(RUNTIME_INFO(dev_priv)->rawclk_freq);
 	else
 		clock = KHz(dev_priv->cdclk.hw.cdclk);
 
@@ -1526,7 +1528,7 @@ static u32 vlv_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz)
 			clock = MHz(25);
 		mul = 16;
 	} else {
-		clock = KHz(dev_priv->rawclk_freq);
+		clock = KHz(RUNTIME_INFO(dev_priv)->rawclk_freq);
 		mul = 128;
 	}
 

drivers/gpu/drm/i915/i915_drv.h

@@ -992,7 +992,6 @@ struct drm_i915_private {
 	unsigned int max_cdclk_freq;
 
 	unsigned int max_dotclk_freq;
-	unsigned int rawclk_freq;
 	unsigned int hpll_freq;
 	unsigned int fdi_pll_freq;
 	unsigned int czclk_freq;

drivers/gpu/drm/i915/intel_device_info.c

@@ -24,6 +24,7 @@
 
 #include <drm/drm_print.h>
 
+#include "display/intel_cdclk.h"
 #include "intel_device_info.h"
 #include "i915_drv.h"
 
@@ -132,6 +133,7 @@ void intel_device_info_print_runtime(const struct intel_runtime_info *info,
 {
 	sseu_dump(&info->sseu, p);
 
+	drm_printf(p, "rawclk rate: %u kHz\n", info->rawclk_freq);
 	drm_printf(p, "CS timestamp frequency: %u kHz\n",
 		   info->cs_timestamp_frequency_khz);
 }
@@ -743,7 +745,7 @@ static u32 read_timestamp_frequency(struct drm_i915_private *dev_priv)
 		 *      hclks." (through the “Clocking Configuration”
 		 *      (“CLKCFG”) MCHBAR register)
 		 */
-		return dev_priv->rawclk_freq / 16;
+		return RUNTIME_INFO(dev_priv)->rawclk_freq / 16;
 	} else if (INTEL_GEN(dev_priv) <= 8) {
 		/* PRMs say:
 		 *
@@ -1043,6 +1045,9 @@ void intel_device_info_runtime_init(struct drm_i915_private *dev_priv)
 		info->ppgtt_type = INTEL_PPGTT_NONE;
 	}
 
+	runtime->rawclk_freq = intel_read_rawclk(dev_priv);
+	drm_dbg(&dev_priv->drm, "rawclk rate: %d kHz\n", runtime->rawclk_freq);
+
 	/* Initialize command stream timestamp frequency */
 	runtime->cs_timestamp_frequency_khz =
 		read_timestamp_frequency(dev_priv);

drivers/gpu/drm/i915/intel_device_info.h

@@ -216,6 +216,8 @@ struct intel_runtime_info {
 	/* Slice/subslice/EU info */
 	struct sseu_dev_info sseu;
 
+	u32 rawclk_freq;
+
 	u32 cs_timestamp_frequency_khz;
 	u32 cs_timestamp_period_ns;