net: dlink: Correct endian treatment of t_SROM data

As it's name suggests, parse_eeprom() parses EEPROM data.

This is done by reading data, 16 bits at a time as follows:

  for (i = 0; i < 128; i++)
    ((__le16 *) sromdata)[i] = cpu_to_le16(read_eeprom(np, i));

sromdata is at the same memory location as psrom.
And the type of psrom is a pointer to struct t_SROM.

As can be seen in the loop above, data is stored in sromdata, and thus
psrom, as 16-bit little-endian values. However, the integer fields of
t_SROM are host byte order.

In the case of the led_mode field this results in a but which has been
addressed by commit e7e5ae7 ("net: dlink: Correct endianness
handling of led_mode").

In the case of the remaining fields, which are updated by this patch,
I do not believe this does not result in any bugs. But it does seem
best to correctly annotate the endianness of integers.

Flagged by Sparse as:

  .../dl2k.c:344:35: warning: restricted __le32 degrades to integer

Compile tested only.
No run-time change intended.

Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

Author: horms

drivers/net/ethernet/dlink/dl2k.h

@@ -329,18 +329,18 @@ enum _pcs_anlpar {
 };
 
 typedef struct t_SROM {
-	u16 config_param;	/* 0x00 */
-	u16 asic_ctrl;		/* 0x02 */
-	u16 sub_vendor_id;	/* 0x04 */
-	u16 sub_system_id;	/* 0x06 */
-	u16 pci_base_1;		/* 0x08 (IP1000A only) */
-	u16 pci_base_2;		/* 0x0a (IP1000A only) */
+	__le16 config_param;	/* 0x00 */
+	__le16 asic_ctrl;	/* 0x02 */
+	__le16 sub_vendor_id;	/* 0x04 */
+	__le16 sub_system_id;	/* 0x06 */
+	__le16 pci_base_1;	/* 0x08 (IP1000A only) */
+	__le16 pci_base_2;	/* 0x0a (IP1000A only) */
 	__le16 led_mode;	/* 0x0c (IP1000A only) */
-	u16 reserved1[9];	/* 0x0e-0x1f */
+	__le16 reserved1[9];	/* 0x0e-0x1f */
 	u8 mac_addr[6];		/* 0x20-0x25 */
 	u8 reserved2[10];	/* 0x26-0x2f */
 	u8 sib[204];		/* 0x30-0xfb */
-	u32 crc;		/* 0xfc-0xff */
+	__le32 crc;		/* 0xfc-0xff */
 } SROM_t, *PSROM_t;
 
 /* Ioctl custom data */