dt-bindings: iommu: Convert msm,iommu-v0 to yaml

Convert Qualcomm IOMMU v0 implementation to yaml format.

iommus part being ommited for the other bindings, as mdp4 one.

Signed-off-by: David Heidelberg <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>

Author: okias

Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt

@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/iommu/qcom,apq8064-iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm APQ8064 IOMMU
+
+maintainers:
+  - David Heidelberg <[email protected]>
+
+description:
+  The MSM IOMMU is an implementation compatible with the ARM VMSA short
+  descriptor page tables. It provides address translation for bus masters
+  outside of the CPU, each connected to the IOMMU through a port called micro-TLB.
+
+properties:
+  compatible:
+    const: qcom,apq8064-iommu
+
+  clocks:
+    items:
+      - description: interface clock for register accesses
+      - description: functional clock for bus accesses
+
+  clock-names:
+    items:
+      - const: smmu_pclk
+      - const: iommu_clk
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Specifiers for the MMU fault interrupts.
+    minItems: 1
+    items:
+      - description: non-secure mode interrupt
+      - description: secure mode interrupt (for instances which supports it)
+
+  "#iommu-cells":
+    const: 1
+    description: Each IOMMU specifier describes a single Stream ID.
+
+  qcom,ncb:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The total number of context banks in the IOMMU.
+    minimum: 1
+    maximum: 4
+
+required:
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - qcom,ncb
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    iommu@7500000 {
+            compatible = "qcom,apq8064-iommu";
+            reg = <0x07500000 0x100000>;
+            interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk SMMU_AHB_CLK>,
+                     <&clk MDP_AXI_CLK>;
+            clock-names = "smmu_pclk",
+                          "iommu_clk";
+            #iommu-cells = <1>;
+            qcom,ncb = <2>;
+    };