Merge branches 'clk-loongson' and 'clk-qcom' into clk-next

* clk-loongson:
  dt-bindings: clock: add loongson-2 clock
  dt-bindings: clock: add loongson-2 clock include file

* clk-qcom: (143 commits)
  clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP
  clk: qcom: Revert sync_state based clk_disable_unused
  dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
  clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC
  clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC
  dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property
  clk: qcom: cpu-8996: add missing cputype include
  clk: qcom: gcc-sa8775p: remove unused variables
  clk: qcom: smd-rpm: provide RPM_SMD_XO_CLK_SRC on MSM8996 platform
  clk: qcom: add msm8996 Core Bus Framework (CBF) support
  dt-bindings: clock: qcom,msm8996-cbf: Describe the MSM8996 CBF clock controller
  clk: qcom: add the driver for the MSM8996 APCS clocks
  clk: qcom: gcc-qcs404: fix duplicate initializer warning
  clk: qcom: cpu-8996: change setup sequence to follow vendor kernel
  clk: qcom: cpu-8996: fix PLL clock ops
  clk: qcom: cpu-8996: fix ACD initialization
  clk: qcom: cpu-8996: fix PLL configuration sequence
  clk: qcom: cpu-8996: move qcom_cpu_clk_msm8996_acd_init call
  clk: qcom: cpu-8996: setup PLLs before registering clocks
  clk: qcom: cpu-8996: simplify the cpu_clk_notifier_cb
  ...

Author: bebarino

Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml

@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/loongson,ls2k-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-2 SoC Clock Control Module
+
+maintainers:
+  - Yinbo Zhu <[email protected]>
+
+description: |
+  Loongson-2 SoC clock control module is an integrated clock controller, which
+  generates and supplies to all modules.
+
+properties:
+  compatible:
+    enum:
+      - loongson,ls2k-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: 100m ref
+
+  clock-names:
+    items:
+      - const: ref_100m
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See include/dt-bindings/clock/loongson,ls2k-clk.h
+      for the full list of Loongson-2 SoC clock IDs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    ref_100m: clock-ref-100m {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <100000000>;
+        clock-output-names = "ref_100m";
+    };
+
+    clk: clock-controller@1fe00480 {
+        compatible = "loongson,ls2k-clk";
+        reg = <0x1fe00480 0x58>;
+        #clock-cells = <1>;
+        clocks = <&ref_100m>;
+        clock-names = "ref_100m";
+    };

Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml

@@ -21,12 +21,16 @@ properties:
 
   clocks:
     items:
+      - description: AHB
       - description: Board XO source
+      - description: Board active XO source
       - description: Sleep clock source
 
   clock-names:
     items:
+      - const: iface
       - const: bi_tcxo
+      - const: bi_tcxo_ao
       - const: sleep_clk
 
   '#clock-cells':
@@ -38,9 +42,18 @@ properties:
   '#power-domain-cells':
     const: 1
 
+  power-domains:
+    items:
+      - description: MMCX power domain
+
   reg:
     maxItems: 1
 
+  required-opps:
+    maxItems: 1
+    description:
+      OPP node describing required MMCX performance point.
+
 required:
   - compatible
   - reg
@@ -54,13 +67,16 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
     #include <dt-bindings/clock/qcom,rpmh.h>
     clock-controller@ad00000 {
       compatible = "qcom,sm8250-camcc";
       reg = <0x0ad00000 0x10000>;
-      clocks = <&rpmhcc RPMH_CXO_CLK>,
+      clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+               <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
                <&sleep_clk>;
-      clock-names = "bi_tcxo", "sleep_clk";
+      clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;

Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml

@@ -25,18 +25,62 @@ properties:
   compatible:
     const: qcom,gcc-apq8084
 
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+      - description: UFS RX symbol 0 clock
+      - description: UFS RX symbol 1 clock
+      - description: UFS TX symbol 0 clock
+      - description: UFS TX symbol 1 clock
+      - description: SATA ASIC0 clock
+      - description: SATA RX clock
+      - description: PCIe PIPE clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+      - const: ufs_rx_symbol_0_clk_src
+      - const: ufs_rx_symbol_1_clk_src
+      - const: ufs_tx_symbol_0_clk_src
+      - const: ufs_tx_symbol_1_clk_src
+      - const: sata_asic0_clk
+      - const: sata_rx_clk
+      - const: pcie_pipe
+
 required:
   - compatible
 
 unevaluatedProperties: false
 
 examples:
   - |
+    /* UFS PHY on APQ8084 is not supported (yet), so these bindings just serve an example */
     clock-controller@fc400000 {
         compatible = "qcom,gcc-apq8084";
         reg = <0xfc400000 0x4000>;
         #clock-cells = <1>;
         #reset-cells = <1>;
         #power-domain-cells = <1>;
+
+        clocks = <&xo_board>,
+                 <&sleep_clk>,
+                 <&ufsphy 0>,
+                 <&ufsphy 1>,
+                 <&ufsphy 2>,
+                 <&ufsphy 3>,
+                 <&sata 0>,
+                 <&sata 1>,
+                 <&pcie_phy>;
+        clock-names = "xo",
+                      "sleep_clk",
+                      "ufs_rx_symbol_0_clk_src",
+                      "ufs_rx_symbol_1_clk_src",
+                      "ufs_tx_symbol_0_clk_src",
+                      "ufs_tx_symbol_1_clk_src",
+                      "sata_asic0_clk",
+                      "sata_rx_clk",
+                      "pcie_pipe";
     };
 ...

Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml

@@ -25,15 +25,13 @@ properties:
       - description: Board XO source
       - description: Sleep clock source
       - description: Audio reference clock (Optional clock)
-      - description: PLL test clock source (Optional clock)
     minItems: 2
 
   clock-names:
     items:
       - const: xo
       - const: sleep_clk
       - const: aud_ref_clk # Optional clock
-      - const: core_bi_pll_test_se # Optional clock
     minItems: 2
 
 required:
@@ -57,11 +55,9 @@ examples:
       reg = <0x00100000 0xb0000>;
       clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
                <&sleep>,
-               <0>,
                <0>;
       clock-names = "xo",
                     "sleep_clk",
-                    "aud_ref_clk",
-                    "core_bi_pll_test_se";
+                    "aud_ref_clk";
     };
 ...

Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml

@@ -20,26 +20,31 @@ properties:
   compatible:
     const: qcom,gcc-qcs404
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+      - description: PCIe 0 PIPE clock (optional)
+      - description: DSI phy instance 0 dsi clock
+      - description: DSI phy instance 0 byte clock
+      - description: HDMI phy PLL clock
+
+  clock-names:
+    items:
+      - const: cxo
+      - const: sleep_clk
+      - const: pcie_0_pipe_clk_src
+      - const: dsi0pll
+      - const: dsi0pllbyte
+      - const: hdmi_pll
 
 required:
   - compatible
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -48,5 +53,6 @@ examples:
       reg = <0x01800000 0x80000>;
       #clock-cells = <1>;
       #reset-cells = <1>;
+      #power-domain-cells = <1>;
     };
 ...

Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml

@@ -55,6 +55,10 @@ properties:
       - description: First EMAC controller reference clock
       - description: Second EMAC controller reference clock
 
+  power-domains:
+    items:
+      - description: CX domain
+
   protected-clocks:
     maxItems: 389
 
@@ -70,6 +74,8 @@ unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
     clock-controller@100000 {
       compatible = "qcom,gcc-sc8280xp";
       reg = <0x00100000 0x1f0000>;
@@ -106,6 +112,7 @@ examples:
                <&pcie4_lane>,
                <&rxc0_ref_clk>,
                <&rxc1_ref_clk>;
+      power-domains = <&rpmhpd SC8280XP_CX>;
 
       #clock-cells = <1>;
       #reset-cells = <1>;

Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml

@@ -24,15 +24,11 @@ properties:
     items:
       - description: Board XO source
       - description: Sleep clock source
-      - description: PLL test clock source (Optional clock)
-    minItems: 2
 
   clock-names:
     items:
       - const: bi_tcxo
       - const: sleep_clk
-      - const: core_bi_pll_test_se # Optional clock
-    minItems: 2
 
 required:
   - compatible
@@ -51,8 +47,9 @@ examples:
       compatible = "qcom,gcc-sdx55";
       reg = <0x00100000 0x1f0000>;
       clocks = <&rpmhcc RPMH_CXO_CLK>,
-               <&sleep_clk>, <&pll_test_clk>;
-      clock-names = "bi_tcxo", "sleep_clk", "core_bi_pll_test_se";
+               <&sleep_clk>;
+      clock-names = "bi_tcxo",
+                    "sleep_clk";
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;

Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml

@@ -26,8 +26,6 @@ properties:
       - description: Sleep clock source
       - description: PCIE Pipe clock source
       - description: USB3 phy wrapper pipe clock source
-      - description: PLL test clock source (Optional clock)
-    minItems: 5
 
   clock-names:
     items:
@@ -36,8 +34,6 @@ properties:
       - const: sleep_clk
       - const: pcie_pipe_clk
       - const: usb3_phy_wrapper_gcc_usb30_pipe_clk
-      - const: core_bi_pll_test_se # Optional clock
-    minItems: 5
 
 required:
   - compatible
@@ -56,9 +52,9 @@ examples:
       compatible = "qcom,gcc-sdx65";
       reg = <0x100000 0x1f7400>;
       clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
-               <&pcie_pipe_clk>, <&usb3_phy_wrapper_gcc_usb30_pipe_clk>, <&pll_test_clk>;
+               <&pcie_pipe_clk>, <&usb3_phy_wrapper_gcc_usb30_pipe_clk>;
       clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
-                    "pcie_pipe_clk", "usb3_phy_wrapper_gcc_usb30_pipe_clk", "core_bi_pll_test_se";
+                    "pcie_pipe_clk", "usb3_phy_wrapper_gcc_usb30_pipe_clk";
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;

Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml

@@ -23,7 +23,6 @@ properties:
     items:
       - description: Board XO source
       - description: Sleep clock source
-      - description: PLL test clock source (Optional clock)
       - description: PCIE 0 Pipe clock source (Optional clock)
       - description: PCIE 1 Pipe clock source (Optional clock)
       - description: UFS card Rx symbol 0 clock source (Optional clock)
@@ -40,7 +39,6 @@ properties:
     items:
       - const: bi_tcxo
       - const: sleep_clk
-      - const: core_bi_pll_test_se # Optional clock
       - const: pcie_0_pipe_clk # Optional clock
       - const: pcie_1_pipe_clk # Optional clock
       - const: ufs_card_rx_symbol_0_clk # Optional clock