dt-bindings: spi: Add Cirrus EP93xx

Add YAML bindings for ep93xx SoC SPI.

Signed-off-by: Nikita Shubin <[email protected]>
Tested-by: Alexander Sverdlin <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Acked-by: Miquel Raynal <[email protected]>
Acked-by: Vinod Koul <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>

Author: maquefel

Documentation/devicetree/bindings/spi/cirrus,ep9301-spi.yaml

@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/cirrus,ep9301-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EP93xx SoC SPI controller
+
+maintainers:
+  - Alexander Sverdlin <[email protected]>
+  - Nikita Shubin <[email protected]>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: cirrus,ep9301-spi
+      - items:
+          - enum:
+              - cirrus,ep9302-spi
+              - cirrus,ep9307-spi
+              - cirrus,ep9312-spi
+              - cirrus,ep9315-spi
+          - const: cirrus,ep9301-spi
+
+  reg:
+    items:
+      - description: SPI registers region
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SPI Controller reference clock source
+
+  dmas:
+    items:
+      - description: rx DMA channel
+      - description: tx DMA channel
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/cirrus,ep9301-syscon.h>
+    spi@808a0000 {
+        compatible = "cirrus,ep9301-spi";
+        reg = <0x808a0000 0x18>;
+        interrupt-parent = <&vic1>;
+        interrupts = <21>;
+        clocks = <&syscon EP93XX_CLK_SPI>;
+        dmas = <&dma1 10 2>, <&dma1 10 1>;
+        dma-names = "rx", "tx";
+        cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+    };