pwm: imx-tpm: Use correct MODULO value for EPWM mode

The modulo register defines the period of the edge-aligned PWM mode
(which is the only mode implemented). The reference manual states:
"The EPWM period is determined by (MOD + 0001h) ..." So the value that
is written to the MOD register must therefore be one less than the
calculated period length. Return -EINVAL if the calculated length is
already zero.
A correct MODULO value is particularly relevant if the PWM has to output
a high frequency due to a low period value.

Fixes: 738a1cf ("pwm: Add i.MX TPM PWM driver support")
Cc: [email protected]
Signed-off-by: Erik Schumacher <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>

Author: iris-ersc

drivers/pwm/pwm-imx-tpm.c

@@ -106,7 +106,9 @@ static int pwm_imx_tpm_round_state(struct pwm_chip *chip,
 	p->prescale = prescale;
 
 	period_count = (clock_unit + ((1 << prescale) >> 1)) >> prescale;
-	p->mod = period_count;
+	if (period_count == 0)
+		return -EINVAL;
+	p->mod = period_count - 1;
 
 	/* calculate real period HW can support */
 	tmp = (u64)period_count << prescale;