Revert "PCI/PM: Assume ports without DLL Link Active train links in 100 ms"

This reverts commit ec411e0.

Patrick reported that this commit broke hybrid graphics on a ThinkPad X1
Extreme 2nd with Intel UHD Graphics 630 and NVIDIA GeForce GTX 1650 Mobile:

  nouveau 0000:01:00.0: fifo: PBDMA0: 01000000 [] ch 0 [00ff992000 DRM] subc 0 mthd 0008 data 00000000

Karol reported that this commit broke Nouveau firmware loading on a Lenovo
P1G2 with Intel UHD Graphics 630 and NVIDIA TU117GLM [Quadro T1000 Mobile]:

  nouveau 0000:01:00.0: acr: AHESASC binary failed

In both cases, reverting ec411e0 solved the problem.  Unfortunately,
this revert will reintroduce the "Thunderbolt bridges take long time to
resume from D3cold" problem:
https://bugzilla.kernel.org/show_bug.cgi?id=206837

Link: https://lore.kernel.org/r/CAErSpo5sTeK_my1dEhWp7aHD0xOp87+oHYWkTjbL7ALgDbXo-Q@mail.gmail.com
Link: https://lore.kernel.org/r/CACO55tsAEa5GXw5oeJPG=mcn+qxNvspXreJYWDJGZBy5v82JDA@mail.gmail.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208597
Reported-by: Patrick Volkerding <[email protected]>
Reported-by: Karol Herbst <[email protected]>
Fixes: ec411e0 ("PCI/PM: Assume ports without DLL Link Active train links in 100 ms")
Signed-off-by: Bjorn Helgaas <[email protected]>

Author: bjorn-helgaas

drivers/pci/pci.c

@@ -4638,8 +4638,7 @@ static int pci_pm_reset(struct pci_dev *dev, int probe)
  * pcie_wait_for_link_delay - Wait until link is active or inactive
  * @pdev: Bridge device
  * @active: waiting for active or inactive?
- * @delay: Delay to wait after link has become active (in ms). Specify %0
- *	   for no delay.
+ * @delay: Delay to wait after link has become active (in ms)
  *
  * Use this to wait till link becomes active or inactive.
  */
@@ -4680,7 +4679,7 @@ static bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active,
 		msleep(10);
 		timeout -= 10;
 	}
-	if (active && ret && delay)
+	if (active && ret)
 		msleep(delay);
 	else if (ret != active)
 		pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n",
@@ -4801,28 +4800,17 @@ void pci_bridge_wait_for_secondary_bus(struct pci_dev *dev)
 	if (!pcie_downstream_port(dev))
 		return;
 
-	/*
-	 * Per PCIe r5.0, sec 6.6.1, for downstream ports that support
-	 * speeds > 5 GT/s, we must wait for link training to complete
-	 * before the mandatory delay.
-	 *
-	 * We can only tell when link training completes via DLL Link
-	 * Active, which is required for downstream ports that support
-	 * speeds > 5 GT/s (sec 7.5.3.6).  Unfortunately some common
-	 * devices do not implement Link Active reporting even when it's
-	 * required, so we'll check for that directly instead of checking
-	 * the supported link speed.  We assume devices without Link Active
-	 * reporting can train in 100 ms regardless of speed.
-	 */
-	if (dev->link_active_reporting) {
-		pci_dbg(dev, "waiting for link to train\n");
-		if (!pcie_wait_for_link_delay(dev, true, 0)) {
+	if (pcie_get_speed_cap(dev) <= PCIE_SPEED_5_0GT) {
+		pci_dbg(dev, "waiting %d ms for downstream link\n", delay);
+		msleep(delay);
+	} else {
+		pci_dbg(dev, "waiting %d ms for downstream link, after activation\n",
+			delay);
+		if (!pcie_wait_for_link_delay(dev, true, delay)) {
 			/* Did not train, no need to wait any further */
 			return;
 		}
 	}
-	pci_dbg(child, "waiting %d ms to become accessible\n", delay);
-	msleep(delay);
 
 	if (!pci_device_is_present(child)) {
 		pci_dbg(child, "waiting additional %d ms to become accessible\n", delay);