dt-bindings: mmp-dma: convert to YAML

Convert the Marvell MMP DMA binding to YAML.

The TXT binding mentions that the controller may have one IRQ per DMA
channel. Examples of this were dropped in the YAML binding because of
dt_binding_check complaints (either too many interrupt cells or
interrupts) and the fact that this is not used in any of the in-tree
device trees.

Signed-off-by: Duje Mihanović <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>

Author: LegoLivesMatter

Documentation/devicetree/bindings/dma/marvell,mmp-dma.yaml

@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/marvell,mmp-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP DMA controller
+
+maintainers:
+  - Duje Mihanović <[email protected]>
+
+description:
+  Marvell MMP SoCs may have two types of DMA controllers, peripheral and audio.
+
+properties:
+  compatible:
+    enum:
+      - marvell,pdma-1.0
+      - marvell,adma-1.0
+      - marvell,pxa910-squ
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt lines for the controller, may be shared or one per DMA channel
+    minItems: 1
+
+  asram:
+    description:
+      A phandle to the SRAM pool
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  '#dma-channels':
+    deprecated: true
+
+  '#dma-requests':
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#dma-cells'
+
+allOf:
+  - $ref: dma-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - marvell,pdma-1.0
+    then:
+      properties:
+        asram: false
+    else:
+      required:
+        - asram
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dma-controller@d4000000 {
+        compatible = "marvell,pdma-1.0";
+        reg = <0xd4000000 0x10000>;
+        interrupts = <47>;
+        #dma-cells = <2>;
+        dma-channels = <16>;
+    };