MIPS: bmips: Remove obsolete DMA mapping support

The code in 'arch/mips/bmips/dma.c' performed DMA mapping for inbound
regions.  This mapping was and is required for the Broadcom STB PCIe
controller HW.  This code is removed as the current 'struct device' has a
@dma_range_map field which performs the same functionality by processing
the "dma-ranges" DT property.

Subsequently, ARCH_HAS_PHYS_TO_DMA is now unset since the dma_to_phys()
and phys_to_dma() functions are removed.

Signed-off-by: Jim Quinlan <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>

Author: jim2101024

arch/mips/Kconfig

@@ -264,7 +264,6 @@ config BMIPS_GENERIC
 	bool "Broadcom Generic BMIPS kernel"
 	select ARCH_HAS_RESET_CONTROLLER
 	select ARCH_HAS_SYNC_DMA_FOR_CPU_ALL
-	select ARCH_HAS_PHYS_TO_DMA
 	select BOOT_RAW
 	select NO_EXCEPT_FILL
 	select USE_OF

arch/mips/bmips/dma.c

@@ -1,68 +1,8 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2014 Kevin Cernekee <[email protected]>
- */
+// SPDX-License-Identifier: GPL-2.0+
 
-#define pr_fmt(fmt)		"bmips-dma: " fmt
-
-#include <linux/device.h>
-#include <linux/dma-direction.h>
-#include <linux/dma-direct.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/printk.h>
-#include <linux/slab.h>
 #include <linux/types.h>
 #include <asm/bmips.h>
-
-/*
- * BCM338x has configurable address translation windows which allow the
- * peripherals' DMA addresses to be different from the Zephyr-visible
- * physical addresses.  e.g. usb_dma_addr = zephyr_pa ^ 0x08000000
- *
- * If the "brcm,ubus" node has a "dma-ranges" property we will enable this
- * translation globally using the provided information.  This implements a
- * very limited subset of "dma-ranges" support and it will probably be
- * replaced by a more generic version later.
- */
-
-struct bmips_dma_range {
-	u32			child_addr;
-	u32			parent_addr;
-	u32			size;
-};
-
-static struct bmips_dma_range *bmips_dma_ranges;
-
-#define FLUSH_RAC		0x100
-
-dma_addr_t phys_to_dma(struct device *dev, phys_addr_t pa)
-{
-	struct bmips_dma_range *r;
-
-	for (r = bmips_dma_ranges; r && r->size; r++) {
-		if (pa >= r->child_addr &&
-		    pa < (r->child_addr + r->size))
-			return pa - r->child_addr + r->parent_addr;
-	}
-	return pa;
-}
-
-phys_addr_t dma_to_phys(struct device *dev, dma_addr_t dma_addr)
-{
-	struct bmips_dma_range *r;
-
-	for (r = bmips_dma_ranges; r && r->size; r++) {
-		if (dma_addr >= r->parent_addr &&
-		    dma_addr < (r->parent_addr + r->size))
-			return dma_addr - r->parent_addr + r->child_addr;
-	}
-	return dma_addr;
-}
+#include <asm/io.h>
 
 void arch_sync_dma_for_cpu_all(void)
 {
@@ -79,45 +19,3 @@ void arch_sync_dma_for_cpu_all(void)
 	__raw_writel(cfg | 0x100, cbr + BMIPS_RAC_CONFIG);
 	__raw_readl(cbr + BMIPS_RAC_CONFIG);
 }
-
-static int __init bmips_init_dma_ranges(void)
-{
-	struct device_node *np =
-		of_find_compatible_node(NULL, NULL, "brcm,ubus");
-	const __be32 *data;
-	struct bmips_dma_range *r;
-	int len;
-
-	if (!np)
-		return 0;
-
-	data = of_get_property(np, "dma-ranges", &len);
-	if (!data)
-		goto out_good;
-
-	len /= sizeof(*data) * 3;
-	if (!len)
-		goto out_bad;
-
-	/* add a dummy (zero) entry at the end as a sentinel */
-	bmips_dma_ranges = kcalloc(len + 1, sizeof(struct bmips_dma_range),
-				   GFP_KERNEL);
-	if (!bmips_dma_ranges)
-		goto out_bad;
-
-	for (r = bmips_dma_ranges; len; len--, r++) {
-		r->child_addr = be32_to_cpup(data++);
-		r->parent_addr = be32_to_cpup(data++);
-		r->size = be32_to_cpup(data++);
-	}
-
-out_good:
-	of_node_put(np);
-	return 0;
-
-out_bad:
-	pr_err("error parsing dma-ranges property\n");
-	of_node_put(np);
-	return -EINVAL;
-}
-arch_initcall(bmips_init_dma_ranges);