dt-bindings: mtd: davinci: convert to yaml

Convert the bindings to yaml format.

Signed-off-by: Marcus Folkesson <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>

Author: marcusfolkesson

Documentation/devicetree/bindings/mtd/davinci-nand.txt

@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/ti,davinci-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI DaVinci NAND controller
+
+maintainers:
+  - Marcus Folkesson <[email protected]>
+
+allOf:
+  - $ref: nand-controller.yaml
+
+properties:
+  compatible:
+    enum:
+      - ti,davinci-nand
+      - ti,keystone-nand
+
+  reg:
+    items:
+      - description: Access window.
+      - description: AEMIF control registers.
+
+  partitions:
+    $ref: /schemas/mtd/partitions/partitions.yaml
+
+  ti,davinci-chipselect:
+    description:
+      Number of chipselect. Indicate on the davinci_nand driver which
+      chipselect is used for accessing the nand.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+  ti,davinci-mask-ale:
+    description:
+      Mask for ALE. Needed for executing address phase. These offset will be
+      added to the base address for the chip select space the NAND Flash
+      device is connected to.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x08
+
+  ti,davinci-mask-cle:
+    description:
+      Mask for CLE. Needed for executing command phase. These offset will be
+      added to the base address for the chip select space the NAND Flash device
+      is connected to.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x10
+
+  ti,davinci-mask-chipsel:
+    description:
+      Mask for chipselect address. Needed to mask addresses for given
+      chipselect.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  ti,davinci-ecc-bits:
+    description: Used ECC bits.
+    enum: [1, 4]
+
+  ti,davinci-ecc-mode:
+    description: Operation mode of the NAND ECC mode.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [none, soft, hw, on-die]
+    deprecated: true
+
+  ti,davinci-nand-buswidth:
+    description: Bus width to the NAND chip.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16]
+    default: 8
+    deprecated: true
+
+  ti,davinci-nand-use-bbt:
+    type: boolean
+    description:
+      Use flash based bad block table support. OOB identifier is saved in OOB
+      area.
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+  - ti,davinci-chipselect
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus {
+      #address-cells = <2>;
+      #size-cells = <1>;
+
+      nand-controller@2000000,0 {
+        compatible = "ti,davinci-nand";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0 0x02000000 0x02000000>,
+              <1 0x00000000 0x00008000>;
+
+        ti,davinci-chipselect = <1>;
+        ti,davinci-mask-ale = <0>;
+        ti,davinci-mask-cle = <0>;
+        ti,davinci-mask-chipsel = <0>;
+
+        ti,davinci-nand-buswidth = <16>;
+        ti,davinci-ecc-mode = "hw";
+        ti,davinci-ecc-bits = <4>;
+        ti,davinci-nand-use-bbt;
+
+        partitions {
+          compatible = "fixed-partitions";
+          #address-cells = <1>;
+          #size-cells = <1>;
+
+          partition@0 {
+            label = "u-boot env";
+            reg = <0 0x020000>;
+          };
+        };
+      };
+    };