arm64: dts: uniphier: add reset-names to NAND controller node

The Denali NAND controller IP has separate reset control for the
controller core and registers.

Add the reset-names, and one more phandle accordingly. This is the
approved DT-binding.

Signed-off-by: Masahiro Yamada <[email protected]>

Author: masahir0y

arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi

@@ -633,7 +633,8 @@
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
 			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
-			resets = <&sys_rst 2>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
 		};
 	};
 };

arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi

@@ -937,7 +937,8 @@
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
 			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
-			resets = <&sys_rst 2>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
 		};
 	};
 };

arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi

@@ -795,7 +795,8 @@
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
 			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
-			resets = <&sys_rst 2>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
 		};
 	};
 };