Merge tag 'mips-fixes_6.15_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS fixes from Thomas Bogendoerfer:

 - Fix delayed timers

 - Fix NULL pointer deref

 - Fix wrong range check

* tag 'mips-fixes_6.15_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Fix MAX_REG_OFFSET
  MIPS: CPS: Fix potential NULL pointer dereferences in cps_prepare_cpus()
  MIPS: rename rollback_handler with skipover_handler
  MIPS: Move r4k_wait() to .cpuidle.text section
  MIPS: Fix idle VS timer enqueue

Author: torvalds

arch/mips/include/asm/idle.h

@@ -6,11 +6,10 @@
 #include <linux/linkage.h>
 
 extern void (*cpu_wait)(void);
-extern void r4k_wait(void);
-extern asmlinkage void __r4k_wait(void);
+extern asmlinkage void r4k_wait(void);
 extern void r4k_wait_irqoff(void);
 
-static inline int using_rollback_handler(void)
+static inline int using_skipover_handler(void)
 {
 	return cpu_wait == r4k_wait;
 }

arch/mips/include/asm/ptrace.h

@@ -65,7 +65,8 @@ static inline void instruction_pointer_set(struct pt_regs *regs,
 
 /* Query offset/name of register from its name/offset */
 extern int regs_query_register_offset(const char *name);
-#define MAX_REG_OFFSET (offsetof(struct pt_regs, __last))
+#define MAX_REG_OFFSET \
+	(offsetof(struct pt_regs, __last) - sizeof(unsigned long))
 
 /**
  * regs_get_register() - get register value from its offset

arch/mips/kernel/genex.S

@@ -104,48 +104,59 @@ handle_vcei:
 
 	__FINIT
 
-	.align	5	/* 32 byte rollback region */
-LEAF(__r4k_wait)
-	.set	push
-	.set	noreorder
-	/* start of rollback region */
-	LONG_L	t0, TI_FLAGS($28)
-	nop
-	andi	t0, _TIF_NEED_RESCHED
-	bnez	t0, 1f
-	 nop
-	nop
-	nop
-#ifdef CONFIG_CPU_MICROMIPS
-	nop
-	nop
-	nop
-	nop
-#endif
+	.section .cpuidle.text,"ax"
+	/* Align to 32 bytes for the maximum idle interrupt region size. */
+	.align	5
+LEAF(r4k_wait)
+	/* Keep the ISA bit clear for calculations on local labels here. */
+0:	.fill 	0
+	/* Start of idle interrupt region. */
+	local_irq_enable
+	/*
+	 * If an interrupt lands here, before going idle on the next
+	 * instruction, we must *NOT* go idle since the interrupt could
+	 * have set TIF_NEED_RESCHED or caused a timer to need resched.
+	 * Fall through -- see skipover_handler below -- and have the
+	 * idle loop take care of things.
+	 */
+1:	.fill	0
+	/* The R2 EI/EHB sequence takes 8 bytes, otherwise pad up.  */
+	.if		1b - 0b > 32
+	.error	"overlong idle interrupt region"
+	.elseif	1b - 0b > 8
+	.align	4
+	.endif
+2:	.fill	0
+	.equ	r4k_wait_idle_size, 2b - 0b
+	/* End of idle interrupt region; size has to be a power of 2. */
 	.set	MIPS_ISA_ARCH_LEVEL_RAW
+r4k_wait_insn:
 	wait
-	/* end of rollback region (the region size must be power of two) */
-1:
+r4k_wait_exit:
+	.set	mips0
+	local_irq_disable
 	jr	ra
-	 nop
-	.set	pop
-	END(__r4k_wait)
+	END(r4k_wait)
+	.previous
 
-	.macro	BUILD_ROLLBACK_PROLOGUE handler
-	FEXPORT(rollback_\handler)
+	.macro	BUILD_SKIPOVER_PROLOGUE handler
+	FEXPORT(skipover_\handler)
 	.set	push
 	.set	noat
 	MFC0	k0, CP0_EPC
-	PTR_LA	k1, __r4k_wait
-	ori	k0, 0x1f	/* 32 byte rollback region */
-	xori	k0, 0x1f
+	/* Subtract/add 2 to let the ISA bit propagate through the mask.  */
+	PTR_LA	k1, r4k_wait_insn - 2
+	ori 	k0, r4k_wait_idle_size - 2
+	.set	noreorder
 	bne	k0, k1, \handler
+	PTR_ADDIU 	k0, r4k_wait_exit - r4k_wait_insn + 2
+	.set	reorder
 	MTC0	k0, CP0_EPC
 	.set pop
 	.endm
 
 	.align	5
-BUILD_ROLLBACK_PROLOGUE handle_int
+BUILD_SKIPOVER_PROLOGUE handle_int
 NESTED(handle_int, PT_SIZE, sp)
 	.cfi_signal_frame
 #ifdef CONFIG_TRACE_IRQFLAGS
@@ -265,7 +276,7 @@ NESTED(except_vec_ejtag_debug, 0, sp)
  * This prototype is copied to ebase + n*IntCtl.VS and patched
  * to invoke the handler
  */
-BUILD_ROLLBACK_PROLOGUE except_vec_vi
+BUILD_SKIPOVER_PROLOGUE except_vec_vi
 NESTED(except_vec_vi, 0, sp)
 	SAVE_SOME docfi=1
 	SAVE_AT docfi=1

arch/mips/kernel/idle.c

@@ -35,13 +35,6 @@ static void __cpuidle r3081_wait(void)
 	write_c0_conf(cfg | R30XX_CONF_HALT);
 }
 
-void __cpuidle r4k_wait(void)
-{
-	raw_local_irq_enable();
-	__r4k_wait();
-	raw_local_irq_disable();
-}
-
 /*
  * This variant is preferable as it allows testing need_resched and going to
  * sleep depending on the outcome atomically.  Unfortunately the "It is

arch/mips/kernel/smp-cps.c

@@ -332,6 +332,8 @@ static void __init cps_prepare_cpus(unsigned int max_cpus)
 	mips_cps_cluster_bootcfg = kcalloc(nclusters,
 					   sizeof(*mips_cps_cluster_bootcfg),
 					   GFP_KERNEL);
+	if (!mips_cps_cluster_bootcfg)
+		goto err_out;
 
 	if (nclusters > 1)
 		mips_cm_update_property();
@@ -348,6 +350,8 @@ static void __init cps_prepare_cpus(unsigned int max_cpus)
 		mips_cps_cluster_bootcfg[cl].core_power =
 			kcalloc(BITS_TO_LONGS(ncores), sizeof(unsigned long),
 				GFP_KERNEL);
+		if (!mips_cps_cluster_bootcfg[cl].core_power)
+			goto err_out;
 
 		/* Allocate VPE boot configuration structs */
 		for (c = 0; c < ncores; c++) {

arch/mips/kernel/traps.c

@@ -77,7 +77,7 @@
 #include "access-helper.h"
 
 extern void check_wait(void);
-extern asmlinkage void rollback_handle_int(void);
+extern asmlinkage void skipover_handle_int(void);
 extern asmlinkage void handle_int(void);
 extern asmlinkage void handle_adel(void);
 extern asmlinkage void handle_ades(void);
@@ -2066,7 +2066,7 @@ void *set_vi_handler(int n, vi_handler_t addr)
 {
 	extern const u8 except_vec_vi[];
 	extern const u8 except_vec_vi_ori[], except_vec_vi_end[];
-	extern const u8 rollback_except_vec_vi[];
+	extern const u8 skipover_except_vec_vi[];
 	unsigned long handler;
 	unsigned long old_handler = vi_handlers[n];
 	int srssets = current_cpu_data.srsets;
@@ -2095,7 +2095,7 @@ void *set_vi_handler(int n, vi_handler_t addr)
 			change_c0_srsmap(0xf << n*4, 0 << n*4);
 	}
 
-	vec_start = using_rollback_handler() ? rollback_except_vec_vi :
+	vec_start = using_skipover_handler() ? skipover_except_vec_vi :
 					       except_vec_vi;
 #if defined(CONFIG_CPU_MICROMIPS) || defined(CONFIG_CPU_BIG_ENDIAN)
 	ori_offset = except_vec_vi_ori - vec_start + 2;
@@ -2426,8 +2426,8 @@ void __init trap_init(void)
 	if (board_be_init)
 		board_be_init();
 
-	set_except_vector(EXCCODE_INT, using_rollback_handler() ?
-					rollback_handle_int : handle_int);
+	set_except_vector(EXCCODE_INT, using_skipover_handler() ?
+					skipover_handle_int : handle_int);
 	set_except_vector(EXCCODE_MOD, handle_tlbm);
 	set_except_vector(EXCCODE_TLBL, handle_tlbl);
 	set_except_vector(EXCCODE_TLBS, handle_tlbs);