drm/etnaviv: use a 32 bit mask as coherent DMA mask

The STLB and the first command buffer (which is used to set up the TLBs)
has a 32 bit size restriction in hardware. There seems to be no way to
specify addresses larger than 32 bit. Keep it simple and restict the
addresses to the lower 4 GiB range for all coherent DMA memory
allocations.

Please note, that platform_device_alloc() will initialize dev->dma_mask
to point to pdev->platform_dma_mask, thus dma_set_mask() will work as
expected.

While at it, move the dma_mask setup code to the of_dma_configure() to
keep all the DMA setup code next to each other.

Suggested-by: Lucas Stach <[email protected]>
Signed-off-by: Michael Walle <[email protected]>
Signed-off-by: Lucas Stach <[email protected]>

Author: mwalle

drivers/gpu/drm/etnaviv/etnaviv_drv.c

@@ -613,6 +613,24 @@ static int etnaviv_pdev_probe(struct platform_device *pdev)
 			component_match_add(dev, &match, compare_str, names[i]);
 	}
 
+	/*
+	 * PTA and MTLB can have 40 bit base addresses, but
+	 * unfortunately, an entry in the MTLB can only point to a
+	 * 32 bit base address of a STLB. Moreover, to initialize the
+	 * MMU we need a command buffer with a 32 bit address because
+	 * without an MMU there is only an indentity mapping between
+	 * the internal 32 bit addresses and the bus addresses.
+	 *
+	 * To make things easy, we set the dma_coherent_mask to 32
+	 * bit to make sure we are allocating the command buffers and
+	 * TLBs in the lower 4 GiB address space.
+	 */
+	if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(40)) ||
+	    dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32))) {
+		dev_dbg(&pdev->dev, "No suitable DMA available\n");
+		return -ENODEV;
+	}
+
 	/*
 	 * Apply the same DMA configuration to the virtual etnaviv
 	 * device as the GPU we found. This assumes that all Vivante
@@ -671,8 +689,6 @@ static int __init etnaviv_init(void)
 			of_node_put(np);
 			goto unregister_platform_driver;
 		}
-		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(40);
-		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
 
 		ret = platform_device_add(pdev);
 		if (ret) {